From b088127ea126cb2edd13051fff11f0a6ca8e5686 Mon Sep 17 00:00:00 2001 From: Kern Sibbald Date: Tue, 18 Apr 2006 10:11:38 +0000 Subject: [PATCH] Updates --- docs/home-page/inc/header.php | 44 +- docs/home-page/news.txt | 98 +++- docs/home-page/pages/support.php | 6 + docs/manual/dirdconf.tex | 714 +++++++++++++++--------------- docs/manual/fileset.tex | 98 ++-- docs/manual/supportedchangers.tex | 2 +- 6 files changed, 524 insertions(+), 438 deletions(-) diff --git a/docs/home-page/inc/header.php b/docs/home-page/inc/header.php index 2f417331..98b5f073 100644 --- a/docs/home-page/inc/header.php +++ b/docs/home-page/inc/header.php @@ -112,18 +112,6 @@ - -
Support
-
- -
-
Documentation
@@ -133,15 +121,27 @@ - -
Donations
+ +
Downloads
+ +
Support
+
+ +
Projects
@@ -152,21 +152,23 @@ - -
Downloads
+ +
Donations
+
Sectoor Logo
+ +
diff --git a/docs/home-page/news.txt b/docs/home-page/news.txt index 113712f1..de1d18fc 100644 --- a/docs/home-page/news.txt +++ b/docs/home-page/news.txt @@ -1,23 +1,53 @@ -Kern;;;2006/04/03;;;14:30 +Kern;;;2006/04/16;;;14:30 - Release Notes for Bacula 1.38.6 + Release Notes for Bacula 1.38.8 Bacula code: Total files = 419 Total lines = 137,078 (*.h *.c *.in) 20,440 additional lines of code since version 1.36.3 !!!! Important !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - If you have problems with segment faults on 64 bit machine, - please modify the build so that the code is compiled with the - -O0 (- oh zero) option otherwise the SD will crash on most all - operations -- apparently due to a compiler bug in gcc's 64 bit - code generation. - - The bad code generation appears to be a compiler "bug", and - it occurs in all version prior to the released 1.38.6. In - version 1.38.6, I have found what appear to be a workaround. + In Bacula version 1.38.5 and prior, there was apparently a + compiler bug that caused the Storage daemon to seg fault. + I have applied a workaround in version 1.38.6 and greater that + seems to work. If you experience problems, follow the instructions + below. + + If you are compiling for a 64 bit machine, you need to ensure + that the code is compiled with the -O0 (- oh zero) option otherwise + the SD will crash on most all operations -- apparently due to + a compiler bug in gcc's 64 bit code generation. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -New features: +Warning: +- The Windows FD no longer automatically folds the case + in wild-card comparions. To get the same behavior as before, + you must explicitly use "Ignore Case = yes" in your FileSet. +- Backslashes are no longer permitted in File directives + (typical error for Windows users), unless the string is + enclosed in double quotes, in which case, the backslashes + must be doubled. +- The new algorithm for selecting Volumes from the Scratch + pool that was implemented in 1.38.6 and 1.38.7 is abandoned + in favor of a corrected version of the 1.38.5 algorithm. + +New features for 1.38.8: +- Regex, RegexFile, and RegexDir are now implemented in the + Win32 FD. However, this is new experimental code that is + largely untested. It may not work, it may cause memory + leaks, or it may even crash the FD. Please test carefully + before using. Unfortunately, at this time, the Ignore Case + directive is not implemented in the Windows regex, so + you must explictly take into account the case in your + patterns. +- On Linux/Unix systems there are two new programs, bregex + and bwild that allow you to test regular expressions and + wild-cards. These programs are installed with the other + binaries. They are not available on Win32 systems. + +Fixes: +- See below. + +New Features from pre-1.38.8 releases: - For autochanger get Scratch tape if in autochanger if no appendable Volumes are available. - New virtual disk autochanger. See scripts/disk-changer for @@ -42,6 +72,8 @@ New features: be started by the scheduler. If you disable a job and restart Bacula or reload the .conf file, the job will be re-enabled. - Add a new Job resource directive "enable = yes|no". +- There is a new program named regex in the tools directory that + allows you to try regular expressions on your system. Major bug fixes: - Fix race condition in multiple-drive autochangers where @@ -60,6 +92,48 @@ Major bug fixes: Minor bug fixes: - See below: +Release 1.38.8 (14Apr06) +14Apr06 +- Correct Makefile for Solaris /bin/sh +- Correct mtx-changer.in for Solaris /bin/sh +- Abort if a conf resource does not have a Name = +12Apr06 +- Change the name of the regex program to bregex. +- Add the bwild program to the tools directory. It is similar + to the bregex program. +- Implement create bregex.h and bregex.c in src/lib from the + Python regexp program. +- Use the new bregex.c to implement Regex expressions on Win32. +11Apr06 +- Modify Makefile to change the permissions on Working Directory + to 770 if the directory is created. +- Do not fail the Makefile if changing the permissions or + owner/group on WorkingDir fails. +- Correct the old recycling algorithm so that Scratch Volumes + are selected when looking for a Volume in the changer. +- Correct a typo in the Verify SQL reported by Joe Park. +10Apr06 +- Remove automatic case folding on Windows FDs. You must + explictly use the 'Ignore Case = yes' option. +- Remove the code added to 1.38.6 and 1.38.7 that pulls a + scratch volume in an Autochanger early in the 'recycling' + algorithm. +08Apr06 +- Tweak license to include Microsoft restrictions. +- Move mysql.reconnect to after real_connect(). Thanks to + Frank Sweetser for the patch. +- Disallow a backslash in a File = directive (Windows junk) + unless the string is quoted. +- Apply Eric's patch to ua_label.c so that daemon protocol + is not translated. + +Release 1.38.7 (06Apr06) released 07Apr06 +06Apr06 +- Remove timed wait for VSS on Win2K3 as it is not yet + implemented. +- Correct bacula.in script to reference bacula-ctl-xx in the + sysconfig directory rather than the bin directory. + Release 1.38.6 (28Mar06) released 29Mar06 28Mar06 - Back port from 1.39 fixes to lib/jcr.c to use foreach_jcr() diff --git a/docs/home-page/pages/support.php b/docs/home-page/pages/support.php index b26d5b93..00b0d67c 100644 --- a/docs/home-page/pages/support.php +++ b/docs/home-page/pages/support.php @@ -62,8 +62,14 @@ If you are having tape problems, please include: +If you are having database problems, please include: + + The first two of these items can be fulfilled by sending us a copy of your config.out file, which is in the main Bacula source directory after you have done diff --git a/docs/manual/dirdconf.tex b/docs/manual/dirdconf.tex index 5b2c9e87..22bb76ac 100644 --- a/docs/manual/dirdconf.tex +++ b/docs/manual/dirdconf.tex @@ -381,32 +381,32 @@ Although an Admin job is recorded in the catalog, very little data is saved. \label{Level} \item [Level = \lt{}job-level\gt{}] - \index[dir]{Level} - \index[dir]{Directive!Level} - The Level directive specifies the default Job level to be run. Each -different -Job Type (Backup, Restore, ...) has a different set of Levels that can be -specified. The Level is normally overridden by a different value that is -specified in the {\bf Schedule} resource. This directive is not required, but -must be specified either by a {\bf Level} directive or as an override -specified in the {\bf Schedule} resource. +\index[dir]{Level} +\index[dir]{Directive!Level} + The Level directive specifies the default Job level to be run. Each + different Job Type (Backup, Restore, ...) has a different set of Levels + that can be specified. The Level is normally overridden by a different + value that is specified in the {\bf Schedule} resource. This directive + is not required, but must be specified either by a {\bf Level} directive + or as an override specified in the {\bf Schedule} resource. For a {\bf Backup} Job, the Level may be one of the following: \begin{description} \item [Full] - \index[dir]{Full} - is all files in the FileSet whether or not they have changed. +\index[dir]{Full} + When the Level is set to Full all files in the FileSet whether or not + they have changed will be backed up. \item [Incremental] \index[dir]{Incremental} - is all files specified in the FileSet that have changed since the last successful backup of the - the same Job using the same FileSet and Client. - If the Director cannot find a previous valid Full backup then - the job will be upgraded into a Full backup. When the Director looks for a - valid backup record in the catalog database, it looks for a previous - Job with: + When the Level is set to Incremental all files specified in the FileSet + that have changed since the last successful backup of the the same Job + using the same FileSet and Client, will be backed up. If the Director + cannot find a previous valid Full backup then the job will be upgraded + into a Full backup. When the Director looks for a valid backup record + in the catalog database, it looks for a previous Job with: \begin{itemize} \item The same Job name. @@ -416,53 +416,52 @@ For a {\bf Backup} Job, the Level may be one of the following: different FileSet. \item The Job was a Full, Differential, or Incremental backup. \item The Job terminated normally (i.e. did not fail or was not canceled). - \end{itemize} +\end{itemize} -If all the above conditions do not hold, the Director will upgrade the -Incremental to a Full save. Otherwise, the Incremental backup will be -performed as requested. - -The File daemon (Client) decides which files to backup for an Incremental -backup by comparing start time of the prior Job (Full, Differential, or -Incremental) against the time each file was last "modified" (st\_mtime) and -the time its attributes were last "changed"(st\_ctime). If the file was -modified or its attributes changed on or after this start time, it will then -be backed up. - -Please note that some virus scanning software may change st\_ctime while -doing the scan. For example, if the virus scanning program attempts to -reset the access time (st\_atime), which Bacula does not use, it will cause -st\_ctime to change and hence Bacula will backup the file during an -Incremental or Differential backup. In the case of Sophos virus scanning, you -can prevent it from resetting the access time (st\_atime) and hence changing -st\_ctime by using the {\bf \verb:--:no-reset-atime} option. For other -software, -please see their manual. - -When Bacula does an Incremental backup, all modified files that are still on -the system are backed up. However, any file that has been deleted since the -last Full backup remains in the Bacula catalog, which means that if between -a Full save and the time you do a restore, some files are deleted, those -deleted files will also be restored. The deleted files will no longer appear -in the catalog after doing another Full save. However, to remove deleted -files from the catalog during an Incremental backup is quite a time consuming -process and not currently implemented in Bacula. - -In addition, if you move a directory rather than copy it, the files in it do not -have their modification time (st\_mtime) or their attribute change time -(st\_ctime) -changed. As a consequence, those files will probably not be backed up by an -Incremental -or Differential backup which depend solely on these time stamps. If you move a -directory, -and wish it to be properly backed up, it is generally preferable to copy it, -then -delete the original. + If all the above conditions do not hold, the Director will upgrade the + Incremental to a Full save. Otherwise, the Incremental backup will be + performed as requested. + + The File daemon (Client) decides which files to backup for an + Incremental backup by comparing start time of the prior Job (Full, + Differential, or Incremental) against the time each file was last + "modified" (st\_mtime) and the time its attributes were last + "changed"(st\_ctime). If the file was modified or its attributes + changed on or after this start time, it will then be backed up. + + Some virus scanning software may change st\_ctime while + doing the scan. For example, if the virus scanning program attempts to + reset the access time (st\_atime), which Bacula does not use, it will + cause st\_ctime to change and hence Bacula will backup the file during + an Incremental or Differential backup. In the case of Sophos virus + scanning, you can prevent it from resetting the access time (st\_atime) + and hence changing st\_ctime by using the {\bf \verb:--:no-reset-atime} + option. For other software, please see their manual. + + When Bacula does an Incremental backup, all modified files that are + still on the system are backed up. However, any file that has been + deleted since the last Full backup remains in the Bacula catalog, which + means that if between a Full save and the time you do a restore, some + files are deleted, those deleted files will also be restored. The + deleted files will no longer appear in the catalog after doing another + Full save. However, to remove deleted files from the catalog during an + Incremental backup is quite a time consuming process and not currently + implemented in Bacula. + + In addition, if you move a directory rather than copy it, the files in + it do not have their modification time (st\_mtime) or their attribute + change time (st\_ctime) changed. As a consequence, those files will + probably not be backed up by an Incremental or Differential backup which + depend solely on these time stamps. If you move a directory, and wish + it to be properly backed up, it is generally preferable to copy it, then + delete the original. \item [Differential] \index[dir]{Differential} - is all files specified in the FileSet that have changed since the last - successful Full backup of the same Job. If the Director cannot find a + When the Level is set to Differential + all files specified in the FileSet that have changed since the last + successful Full backup of the same Job will be backed up. + If the Director cannot find a valid previous Full backup for the same Job, FileSet, and Client, backup, then the Differential job will be upgraded into a Full backup. When the Director looks for a valid Full backup record in the catalog @@ -478,57 +477,57 @@ delete the original. \item The Job terminated normally (i.e. did not fail or was not canceled). \end{itemize} -If all the above conditions do not hold, the Director will upgrade the -Differential to a Full save. Otherwise, the Differential backup will be -performed as requested. - -The File daemon (Client) decides which files to backup for a differential -backup by comparing the start time of the prior Full backup Job against the -time each file was last "modified" (st\_mtime) and the time its attributes -were last "changed" (st\_ctime). If the file was modified or its attributes -were changed on or after this start time, it will then be backed up. The -start time used is displayed after the {\bf Since} on the Job report. In rare -cases, using the start time of the prior backup may cause some files to be -backed up twice, but it ensures that no change is missed. As with the -Incremental option, you should ensure that the clocks on your server and -client are synchronized or as close as possible to avoid the possibility of a -file being skipped. Note, on versions 1.33 or greater Bacula automatically -makes the necessary adjustments to the time between the server and the client -so that the times Bacula uses are synchronized. - -When Bacula does a Differential backup, all modified files that are still -on the system are backed up. However, any file that has been deleted since -the last Full backup remains in the Bacula catalog, which means that if -between a Full save and the time you do a restore, some files are deleted, -those deleted files will also be restored. The deleted files will no -longer appear in the catalog after doing another Full save. However, to -remove deleted files from the catalog during a Differential backup is quite -a time consuming process and not currently implemented in Bacula. It is, -however, a planned future feature. - - -As noted above, if you move a directory rather than copy it, the -files in it do not have their modification time (st\_mtime) or -their attribute change time (st\_ctime) changed. As a -consequence, those files will probably not be backed up by an -Incremental or Differential backup which depend solely on these -time stamps. If you move a directory, and wish it to be -properly backed up, it is generally preferable to copy it, then -delete the original. Alternatively, you can move the directory, then -use the {\bf touch} program to update the timestamps. - -Every once and a while, someone asks why we need Differential -backups as long as Incremental backups pickup all changed files. -There are possibly many answers to this question, but the one -that is the most important for me is that it effectively combines -all the Incremental and Differential backups since the last Full -backup into a single Differential backup. This has two effects: -1. It gives some redundancy. 2. More importantly, it reduces the -number of Volumes that are needed to do a restore effectively -eliminating the need to read all the volumes on which the -preceding Incremental and Differential backups since the last -Full are done. - + If all the above conditions do not hold, the Director will upgrade the + Differential to a Full save. Otherwise, the Differential backup will be + performed as requested. + + The File daemon (Client) decides which files to backup for a + differential backup by comparing the start time of the prior Full backup + Job against the time each file was last "modified" (st\_mtime) and the + time its attributes were last "changed" (st\_ctime). If the file was + modified or its attributes were changed on or after this start time, it + will then be backed up. The start time used is displayed after the {\bf + Since} on the Job report. In rare cases, using the start time of the + prior backup may cause some files to be backed up twice, but it ensures + that no change is missed. As with the Incremental option, you should + ensure that the clocks on your server and client are synchronized or as + close as possible to avoid the possibility of a file being skipped. + Note, on versions 1.33 or greater Bacula automatically makes the + necessary adjustments to the time between the server and the client so + that the times Bacula uses are synchronized. + + When Bacula does a Differential backup, all modified files that are + still on the system are backed up. However, any file that has been + deleted since the last Full backup remains in the Bacula catalog, which + means that if between a Full save and the time you do a restore, some + files are deleted, those deleted files will also be restored. The + deleted files will no longer appear in the catalog after doing another + Full save. However, to remove deleted files from the catalog during a + Differential backup is quite a time consuming process and not currently + implemented in Bacula. It is, however, a planned future feature. + + As noted above, if you move a directory rather than copy it, the + files in it do not have their modification time (st\_mtime) or + their attribute change time (st\_ctime) changed. As a + consequence, those files will probably not be backed up by an + Incremental or Differential backup which depend solely on these + time stamps. If you move a directory, and wish it to be + properly backed up, it is generally preferable to copy it, then + delete the original. Alternatively, you can move the directory, then + use the {\bf touch} program to update the timestamps. + + Every once and a while, someone asks why we need Differential + backups as long as Incremental backups pickup all changed files. + There are possibly many answers to this question, but the one + that is the most important for me is that a Differential backup + effectively merges + all the Incremental and Differential backups since the last Full backup + into a single Differential backup. This has two effects: 1. It gives + some redundancy since the old backups could be used if the merged backup + cannot be read. 2. More importantly, it reduces the number of Volumes + that are needed to do a restore effectively eliminating the need to read + all the volumes on which the preceding Incremental and Differential + backups since the last Full are done. \end{description} @@ -539,7 +538,7 @@ For a {\bf Verify} Job, the Level may be one of the following: \begin{description} \item [InitCatalog] - \index[dir]{InitCatalog} +\index[dir]{InitCatalog} does a scan of the specified {\bf FileSet} and stores the file attributes in the Catalog database. Since no file data is saved, you might ask why you would want to do this. It turns out to be a very @@ -558,7 +557,7 @@ For a {\bf Verify} Job, the Level may be one of the following: the files. \item [Catalog] - \index[dir]{Catalog} +\index[dir]{Catalog} Compares the current state of the files against the state previously saved during an {\bf InitCatalog}. Any discrepancies are reported. The items reported are determined by the {\bf verify} options specified on @@ -573,109 +572,114 @@ For a {\bf Verify} Job, the Level may be one of the following: track new files. \item [VolumeToCatalog] - \index[dir]{VolumeToCatalog} - This level causes Bacula to read the file attribute data written to the -Volume from the last Job. The file attribute data are compared to the values -saved in the Catalog database and any differences are reported. This is -similar to the {\bf Catalog} level except that instead of comparing the disk -file attributes to the catalog database, the attribute data written to the -Volume is read and compared to the catalog database. Although the attribute -data including the signatures (MD5 or SHA1) are compared, the actual file data -is not compared (it is not in the catalog). - -Please note! If you run two Verify VolumeToCatalog jobs on the same client at -the same time, the results will certainly be incorrect. This is because the -Verify VolumeToCatalog modifies the Catalog database while running. +\index[dir]{VolumeToCatalog} + This level causes Bacula to read the file attribute data written to the + Volume from the last Job. The file attribute data are compared to the + values saved in the Catalog database and any differences are reported. + This is similar to the {\bf Catalog} level except that instead of + comparing the disk file attributes to the catalog database, the + attribute data written to the Volume is read and compared to the catalog + database. Although the attribute data including the signatures (MD5 or + SHA1) are compared, the actual file data is not compared (it is not in + the catalog). + + Please note! If you run two Verify VolumeToCatalog jobs on the same + client at the same time, the results will certainly be incorrect. This + is because the Verify VolumeToCatalog modifies the Catalog database + while running. \item [DiskToCatalog] - \index[dir]{DiskToCatalog} - This level causes Bacula to read the files as they currently are on disk, -and -to compare the current file attributes with the attributes saved in the -catalog from the last backup for the job specified on the {\bf VerifyJob} -directive. This level differs from the {\bf Catalog} level described above by -the fact that it doesn't compare against a previous Verify job but against a -previous backup. When you run this level, you must supply the verify options -on your Include statements. Those options determine what attribute fields are -compared. - -This command can be very useful if you have disk problems because it will -compare the current state of your disk against the last successful backup, -which may be several jobs. - -Note, the current implementation (1.32c) does not identify files that have -been deleted. +\index[dir]{DiskToCatalog} + This level causes Bacula to read the files as they currently are on + disk, and to compare the current file attributes with the attributes + saved in the catalog from the last backup for the job specified on the + {\bf VerifyJob} directive. This level differs from the {\bf Catalog} + level described above by the fact that it doesn't compare against a + previous Verify job but against a previous backup. When you run this + level, you must supply the verify options on your Include statements. + Those options determine what attribute fields are compared. + + This command can be very useful if you have disk problems because it + will compare the current state of your disk against the last successful + backup, which may be several jobs. + + Note, the current implementation (1.32c) does not identify files that + have been deleted. \end{description} \item [Verify Job = \lt{}Job-Resource-Name\gt{}] \index[dir]{Verify Job} \index[dir]{Directive!Verify Job} - If you run a verify job without this directive, the last job run will be -compared with the catalog, which means that you must immediately follow a -backup by a verify command. If you specify a {\bf Verify Job} Bacula will -find the last job with that name that ran. This permits you to run all your -backups, then run Verify jobs on those that you wish to be verified (most -often a {\bf VolumeToCatalog}) so that the tape just written is re-read. + If you run a verify job without this directive, the last job run will be + compared with the catalog, which means that you must immediately follow + a backup by a verify command. If you specify a {\bf Verify Job} Bacula + will find the last job with that name that ran. This permits you to run + all your backups, then run Verify jobs on those that you wish to be + verified (most often a {\bf VolumeToCatalog}) so that the tape just + written is re-read. \item [JobDefs = \lt{}JobDefs-Resource-Name\gt{}] - \index[dir]{JobDefs} - \index[dir]{Directive!JobDefs} - If a JobDefs-Resource-Name is specified, all the values contained in the -named JobDefs resource will be used as the defaults for the current Job. Any -value that you explicitly define in the current Job resource, will override -any defaults specified in the JobDefs resource. The use of this directive -permits writing much more compact Job resources where the bulk of the -directives are defined in one or more JobDefs. This is particularly useful if -you have many similar Jobs but with minor variations such as different -Clients. A simple example of the use of JobDefs is provided in the default -bacula-dir.conf file. +\index[dir]{JobDefs} +\index[dir]{Directive!JobDefs} + If a JobDefs-Resource-Name is specified, all the values contained in the + named JobDefs resource will be used as the defaults for the current Job. + Any value that you explicitly define in the current Job resource, will + override any defaults specified in the JobDefs resource. The use of + this directive permits writing much more compact Job resources where the + bulk of the directives are defined in one or more JobDefs. This is + particularly useful if you have many similar Jobs but with minor + variations such as different Clients. A simple example of the use of + JobDefs is provided in the default bacula-dir.conf file. \item [Bootstrap = \lt{}bootstrap-file\gt{}] - \index[dir]{Bootstrap} - \index[dir]{Directive!Bootstrap} - The Bootstrap directive specifies a bootstrap file that, if provided, will -be used during {\bf Restore} Jobs and is ignored in other Job types. The {\bf -bootstrap} file contains the list of tapes to be used in a restore Job as -well as which files are to be restored. Specification of this directive is -optional, and if specified, it is used only for a restore job. In addition, -when running a Restore job from the console, this value can be changed. - -If you use the {\bf Restore} command in the Console program, to start a -restore job, the {\bf bootstrap} file will be created automatically from the -files you select to be restored. - -For additional details of the {\bf bootstrap} file, please see -\ilink{Restoring Files with the Bootstrap File}{_ChapterStart43} -chapter of this manual. +\index[dir]{Bootstrap} +\index[dir]{Directive!Bootstrap} + The Bootstrap directive specifies a bootstrap file that, if provided, + will be used during {\bf Restore} Jobs and is ignored in other Job + types. The {\bf bootstrap} file contains the list of tapes to be used + in a restore Job as well as which files are to be restored. + Specification of this directive is optional, and if specified, it is + used only for a restore job. In addition, when running a Restore job + from the console, this value can be changed. + + If you use the {\bf Restore} command in the Console program, to start a + restore job, the {\bf bootstrap} file will be created automatically from + the files you select to be restored. + + For additional details of the {\bf bootstrap} file, please see + \ilink{Restoring Files with the Bootstrap File}{_ChapterStart43} chapter + of this manual. \label{writebootstrap} \item [Write Bootstrap = \lt{}bootstrap-file-specification\gt{}] - \index[dir]{Write Bootstrape} - \index[dir]{Directive!Write Bootstrape} - The {\bf writebootstrap} directive specifies a file name where Bacula will -write a {\bf bootstrap} file for each Backup job run. Thus this directive -applies only to Backup Jobs. If the Backup job is a Full save, Bacula will -erase any current contents of the specified file before writing the bootstrap -records. If the Job is an Incremental save, Bacula will append the current -bootstrap record to the end of the file. - -Using this feature, permits you to constantly have a bootstrap file that can -recover the current state of your system. Normally, the file specified should -be a mounted drive on another machine, so that if your hard disk is lost, -you will immediately have a bootstrap record available. Alternatively, you -should copy the bootstrap file to another machine after it is updated. - -If the {\bf bootstrap-file-specification} begins with a vertical bar (|), -Bacula will use the specification as the name of a program to which it will -pipe the bootstrap record. It could for example be a shell script that emails -you the bootstrap record. - -For more details on using this file, please see the chapter entitled -\ilink{The Bootstrap File}{_ChapterStart43} of this manual. +\index[dir]{Write Bootstrape} +\index[dir]{Directive!Write Bootstrape} + The {\bf writebootstrap} directive specifies a file name where Bacula + will write a {\bf bootstrap} file for each Backup job run. Thus this + directive applies only to Backup Jobs. If the Backup job is a Full + save, Bacula will erase any current contents of the specified file + before writing the bootstrap records. If the Job is an Incremental + save, Bacula will append the current bootstrap record to the end of the + file. + + Using this feature, permits you to constantly have a bootstrap file that + can recover the current state of your system. Normally, the file + specified should be a mounted drive on another machine, so that if your + hard disk is lost, you will immediately have a bootstrap record + available. Alternatively, you should copy the bootstrap file to another + machine after it is updated. + + If the {\bf bootstrap-file-specification} begins with a vertical bar + (|), Bacula will use the specification as the name of a program to which + it will pipe the bootstrap record. It could for example be a shell + script that emails you the bootstrap record. + + For more details on using this file, please see the chapter entitled + \ilink{The Bootstrap File}{_ChapterStart43} of this manual. \item [Client = \lt{}client-resource-name\gt{}] - \index[dir]{Client} - \index[dir]{Directive!Client} +\index[dir]{Client} +\index[dir]{Directive!Client} The Client directive specifies the Client (File daemon) that will be used in the current Job. Only a single Client may be specified in any one Job. The Client runs on the machine to be backed up, and sends the requested files to @@ -685,8 +689,8 @@ For more details on using this file, please see the chapter entitled This directive is required. \item [FileSet = \lt{}FileSet-resource-name\gt{}] - \index[dir]{FileSet} - \index[dir]{FileSet} +\index[dir]{FileSet} +\index[dir]{FileSet} The FileSet directive specifies the FileSet that will be used in the current Job. The FileSet specifies which directories (or files) are to be backed up, and what options to use (e.g. compression, ...). Only a @@ -695,8 +699,8 @@ For more details on using this file, please see the chapter entitled this chapter. This directive is required. \item [Messages = \lt{}messages-resource-name\gt{}] - \index[dir]{Messages} - \index[dir]{Directive!Messages} +\index[dir]{Messages} +\index[dir]{Directive!Messages} The Messages directive defines what Messages resource should be used for this job, and thus how and where the various messages are to be delivered. For example, you can direct some messages to a log file, and @@ -705,8 +709,8 @@ For more details on using this file, please see the chapter entitled directive is required. \item [Pool = \lt{}pool-resource-name\gt{}] - \index[dir]{Pool} - \index[dir]{Directive!Pool} +\index[dir]{Pool} +\index[dir]{Directive!Pool} The Pool directive defines the pool of Volumes where your data can be backed up. Many Bacula installations will use only the {\bf Default} pool. However, if you want to specify a different set of Volumes for @@ -715,31 +719,29 @@ For more details on using this file, please see the chapter entitled section}{PoolResource} of this chapter. This directive is required. \item [Full Backup Pool = \lt{}pool-resource-name\gt{}] - \index[dir]{Full Backup Pool} - \index[dir]{Directive!Full Backup Pool} - The {\it Full Backup Pool} specifies a Pool to be used for Full backups. It - will override any Pool specification during a Full backup. This directive is - optional. +\index[dir]{Full Backup Pool} +\index[dir]{Directive!Full Backup Pool} + The {\it Full Backup Pool} specifies a Pool to be used for Full backups. + It will override any Pool specification during a Full backup. This + directive is optional. \item [Differential Backup Pool = \lt{}pool-resource-name\gt{}] - \index[dir]{Differential Backup Pool} - \index[dir]{Directive!Differential Backup Pool} - The {\it Differential Backup Pool} specifies a Pool to be used for - Differential backups. It will override any Pool specification during a - Differential backup. This directive is optional. +\index[dir]{Differential Backup Pool} +\index[dir]{Directive!Differential Backup Pool} + The {\it Differential Backup Pool} specifies a Pool to be used for + Differential backups. It will override any Pool specification during a + Differential backup. This directive is optional. \item [Incremental Backup Pool = \lt{}pool-resource-name\gt{}] - \index[dir]{Incremental Backup Pool} - \index[dir]{Directive!Incremental Backup Pool} - The {\it Incremental Backup Pool} specifies a Pool to be used for -Incremental - backups. It will override any Pool specification during an Incremental -backup. - This directive is optional. +\index[dir]{Incremental Backup Pool} +\index[dir]{Directive!Incremental Backup Pool} + The {\it Incremental Backup Pool} specifies a Pool to be used for + Incremental backups. It will override any Pool specification during an + Incremental backup. This directive is optional. \item [Schedule = \lt{}schedule-name\gt{}] - \index[dir]{Schedule} - \index[dir]{Directive!Schedule} +\index[dir]{Schedule} +\index[dir]{Directive!Schedule} The Schedule directive defines what schedule is to be used for the Job. The schedule in turn determines when the Job will be automatically started and what Job level (i.e. Full, Incremental, ...) is to be run. @@ -755,17 +757,16 @@ backup. \item [Storage = \lt{}storage-resource-name\gt{}] - \index[dir]{Storage} - \index[dir]{Directive!Storage} - The Storage directive defines the name of the storage services where you -want - to backup the FileSet data. For additional details, see the +\index[dir]{Storage} +\index[dir]{Directive!Storage} + The Storage directive defines the name of the storage services where you + want to backup the FileSet data. For additional details, see the \ilink{Storage Resource Chapter}{StorageResource2} of this manual. - This directive is required. + This directive is required. \item [Max Start Delay = \lt{}time\gt{}] - \index[dir]{Max Start Delay} - \index[dir]{Directive!Max Start Delay} +\index[dir]{Max Start Delay} +\index[dir]{Directive!Max Start Delay} The time specifies the maximum delay between the scheduled time and the actual start time for the Job. For example, a job can be scheduled to run at 1:00am, but because other jobs are running, it may wait to run. @@ -775,16 +776,16 @@ want which indicates no limit. \item [Max Run Time = \lt{}time\gt{}] - \index[dir]{Max Run Time} - \index[dir]{Directive!Max Run Time} +\index[dir]{Max Run Time} +\index[dir]{Directive!Max Run Time} The time specifies the maximum allowed time that a job may run, counted from when the job starts, ({\bf not} necessarily the same as when the job was scheduled). This directive is implemented in version 1.33 and later. \item [Max Wait Time = \lt{}time\gt{}] - \index[dir]{Max Wait Time} - \index[dir]{Directive!Max Wait Time} +\index[dir]{Max Wait Time} +\index[dir]{Directive!Max Wait Time} The time specifies the maximum allowed time that a job may block waiting for a resource (such as waiting for a tape to be mounted, or waiting for the storage or file daemons to perform their duties), counted from the @@ -792,11 +793,9 @@ want scheduled). This directive is implemented only in version 1.33 and later. - - \item [Incremental Max Wait Time = \lt{}time\gt{}] - \index[dir]{Incremental Max Wait Time} - \index[dir]{Directive!Incremental Max Wait Time} +\index[dir]{Incremental Max Wait Time} +\index[dir]{Directive!Incremental Max Wait Time} The time specifies the maximum allowed time that an Incremental backup job may block waiting for a resource (such as waiting for a tape to be mounted, or waiting for the storage or file daemons to perform their @@ -805,8 +804,8 @@ want {\bf Max Wait Time} it may also be applied to the job. \item [Differential Max Wait Time = \lt{}time\gt{}] - \index[dir]{Differential Max Wait Time} - \index[dir]{Directive!Differential Max Wait Time} +\index[dir]{Differential Max Wait Time} +\index[dir]{Directive!Differential Max Wait Time} The time specifies the maximum allowed time that a Differential backup job may block waiting for a resource (such as waiting for a tape to be mounted, or waiting for the storage or file daemons to perform their @@ -815,8 +814,8 @@ want {\bf Max Wait Time} it may also be applied to the job. \item [Prefer Mounted Volumes = \lt{}yes|no\gt{}] - \index[dir]{Prefer Mounted Volumes} - \index[dir]{Directive!Prefer Mounted Volumes} +\index[dir]{Prefer Mounted Volumes} +\index[dir]{Directive!Prefer Mounted Volumes} If the Prefer Mounted Volumes directive is set to {\bf yes} (default yes), the Storage daemon is requested to select either an Autochanger or a drive with a valid Volume already mounted in preference to a drive @@ -837,8 +836,8 @@ want \item [Prune Jobs = \lt{}yes|no\gt{}] - \index[dir]{Prune Jobs} - \index[dir]{Directive!Prune Jobs} +\index[dir]{Prune Jobs} +\index[dir]{Directive!Prune Jobs} Normally, pruning of Jobs from the Catalog is specified on a Client by Client basis in the Client resource with the {\bf AutoPrune} directive. If this directive is specified (not normally) and the value is {\bf @@ -847,8 +846,8 @@ want \item [Prune Files = \lt{}yes|no\gt{}] - \index[dir]{Prune Files} - \index[dir]{Directive!Prune Files} +\index[dir]{Prune Files} +\index[dir]{Directive!Prune Files} Normally, pruning of Files from the Catalog is specified on a Client by Client basis in the Client resource with the {\bf AutoPrune} directive. If this directive is specified (not normally) and the value is {\bf @@ -856,8 +855,8 @@ want default is {\bf no}. \item [Prune Volumes = \lt{}yes|no\gt{}] - \index[dir]{Prune Volumes} - \index[dir]{Directive!Prune Volumes} +\index[dir]{Prune Volumes} +\index[dir]{Directive!Prune Volumes} Normally, pruning of Volumes from the Catalog is specified on a Client by Client basis in the Client resource with the {\bf AutoPrune} directive. If this directive is specified (not normally) and the value @@ -865,9 +864,9 @@ want resource. The default is {\bf no}. \item [Run Before Job = \lt{}command\gt{}] - \index[dir]{Run Before Job} - \index[dir]{Directive!Run Before Job} - \index[dir]{Directive!Run Before Job} +\index[dir]{Run Before Job} +\index[dir]{Directive!Run Before Job} +\index[dir]{Directive!Run Before Job} The specified {\bf command} is run as an external program prior to running the current Job. Any output sent by the command to standard output will be included in the Bacula job report. The command string must be a @@ -927,8 +926,8 @@ The Job Exit Status code \%e edits the following values: before leaving will be used. \item [Run After Job = \lt{}command\gt{}] - \index[dir]{Run After Job} - \index[dir]{Directive!Run After Job} +\index[dir]{Run After Job} +\index[dir]{Directive!Run After Job} The specified {\bf command} is run as an external program if the current job terminates normally (without error or without being canceled). This directive is not required. The command string must be a valid program name @@ -944,8 +943,8 @@ The Job Exit Status code \%e edits the following values: non-normal status. \item [Run After Failed Job = \lt{}command\gt{}] - \index[dir]{Run After Job} - \index[dir]{Directive!Run After Job} +\index[dir]{Run After Job} +\index[dir]{Directive!Run After Job} The specified {\bf command} is run as an external program after the current job terminates with any error status. This directive is not required. The command string must be a valid program name or name of a shell script. If @@ -961,33 +960,33 @@ The Job Exit Status code \%e edits the following values: \item [Client Run Before Job = \lt{}command\gt{}] - \index[dir]{Client Run Before Job} - \index[dir]{Directive!Client Run Before Job} - This directive is the same as {\bf Run Before Job} except that the program is run on - the client machine. The same restrictions apply to Unix systems as noted - above for the {\bf Run Before Job}. +\index[dir]{Client Run Before Job} +\index[dir]{Directive!Client Run Before Job} + This directive is the same as {\bf Run Before Job} except that the + program is run on the client machine. The same restrictions apply to + Unix systems as noted above for the {\bf Run Before Job}. - When specifying a full path to an executable if the path or executable name - contains whitespace or special characters they will need to be quoted. - Arguments containing whitespace or special characters will also have to be - quoted. + When specifying a full path to an executable if the path or executable + name contains whitespace or special characters they will need to be + quoted. Arguments containing whitespace or special characters will also + have to be quoted. {\bf Special Windows Considerations} - In addition, for a Windows client on - version 1.33 and above, please take careful note that you must ensure a - correct path to your script. The script or program can be a .com, .exe or - a .bat file. However, if you specify a path, you must also specify the full - extension. Unix like commands will not work unless you have installed and - properly configured Cygwin in addition to and separately from Bacula. + In addition, for a Windows client on version 1.33 and above, please take + careful note that you must ensure a correct path to your script. The + script or program can be a .com, .exe or a .bat file. However, if you + specify a path, you must also specify the full extension. Unix like + commands will not work unless you have installed and properly configured + Cygwin in addition to and separately from Bacula. - The command can be anything that cmd.exe or command.com will recognize as an - executable file. Specifying the executable's extension is optional, unless - there is an ambiguity. (i.e. ls.bat, ls.exe) + The command can be anything that cmd.exe or command.com will recognize + as an executable file. Specifying the executable's extension is + optional, unless there is an ambiguity. (i.e. ls.bat, ls.exe) - The System \%Path\% will be searched for the command. (under the environment - variable dialog you have have both System Environment and User Environment, - we believe that only the System environment will be available to bacula-fd, - if it is running as a service.) + The System \%Path\% will be searched for the command. (under the + environment variable dialog you have have both System Environment and + User Environment, we believe that only the System environment will be + available to bacula-fd, if it is running as a service.) System environment variables can be referenced with \%var\% and used as either part of the command name or arguments. @@ -1000,19 +999,19 @@ ClientRunBeforeJob = "\"C:/Program Files/Software \end{verbatim} \normalsize - The special characters \&()[]\{\}\^{}=;!'+,`\~{} will need to be quoted if - they are part of a filename or argument. + The special characters \&()[]\{\}\^{}=;!'+,`\~{} will need to be quoted + if they are part of a filename or argument. - If someone is logged in, a blank "command" window running the commands will - be present during the execution of the command. + If someone is logged in, a blank "command" window running the commands + will be present during the execution of the command. - Some Suggestions from Phil Stracchino for running on Win32 machines with the - native Win32 File daemon: + Some Suggestions from Phil Stracchino for running on Win32 machines with + the native Win32 File daemon: \begin{enumerate} \item You might want the ClientRunBeforeJob directive to specify a .bat - file which runs the actual client-side commands, rather than trying to - run (for example) regedit /e directly. + file which runs the actual client-side commands, rather than trying + to run (for example) regedit /e directly. \item The batch file should explicitly 'exit 0' on successful completion. \item The path to the batch file should be specified in Unix form: @@ -1116,20 +1115,21 @@ will be sent to the Director. \item [Where = \lt{}directory\gt{}] \index[dir]{Where} \index[dir]{Directive!Where} - This directive applies only to a Restore job and specifies a prefix to the -directory name of all files being restored. This permits files to be restored -in a different location from which they were saved. If {\bf Where} is not -specified or is set to backslash ({\bf /}), the files will be restored to -their original location. By default, we have set {\bf Where} in the example -configuration files to be {\bf /tmp/bacula-restores}. This is to prevent -accidental overwriting of your files. + This directive applies only to a Restore job and specifies a prefix to + the directory name of all files being restored. This permits files to + be restored in a different location from which they were saved. If {\bf + Where} is not specified or is set to backslash ({\bf /}), the files will + be restored to their original location. By default, we have set {\bf + Where} in the example configuration files to be {\bf + /tmp/bacula-restores}. This is to prevent accidental overwriting of + your files. \item [Replace = \lt{}replace-option\gt{}] \index[dir]{Replace} \index[dir]{Directive!Replace} - This directive applies only to a Restore job and specifies what happens when - Bacula wants to restore a file or directory that already exists. You have the - following options for {\bf replace-option}: + This directive applies only to a Restore job and specifies what happens + when Bacula wants to restore a file or directory that already exists. + You have the following options for {\bf replace-option}: \begin{description} @@ -1139,14 +1139,14 @@ accidental overwriting of your files. replaced by the copy that was backed up. \item [ifnewer] - \index[dir]{ifnewer} - if the backed up file (on tape) is newer than the existing file, the existing - file is deleted and replaced by the back up. +\index[dir]{ifnewer} + if the backed up file (on tape) is newer than the existing file, the + existing file is deleted and replaced by the back up. \item [ifolder] \index[dir]{ifolder} - if the backed up file (on tape) is older than the existing file, the existing - file is deleted and replaced by the back up. + if the backed up file (on tape) is older than the existing file, the + existing file is deleted and replaced by the back up. \item [never] \index[dir]{never} @@ -1258,31 +1258,30 @@ accidental overwriting of your files. The default priority is 10. - If you want to run concurrent jobs, which is not recommended, you should -keep - these points in mind: + If you want to run concurrent jobs, which is not recommended, you should + keep these points in mind: \begin{itemize} -\item To run concurrent jobs, you must set Maximum Concurrent Jobs = 2 in 5 - or 6 distinct places: in bacula-dir.conf in the Director, the Job, the - Client, the Storage resources; in bacula-fd in the FileDaemon (or Client) - resource, and in bacula-sd.conf in the Storage resource. If any one is - missing, it will throttle the jobs to one at a time. -\item Bacula concurrently runs jobs of only one priority at a time. It will - not simultaneously run a priority 1 and a priority 2 job. -\item If Bacula is running a priority 2 job and a new priority 1 job is - scheduled, it will wait until the running priority 2 job terminates even if - the Maximum Concurrent Jobs settings would otherwise allow two jobs to run - simultaneously. -\item Suppose that bacula is running a priority 2 job and a new priority 1 job - is scheduled and queued waiting for the running priority 2 job to terminate. - If you then start a second priority 2 job, the waiting priority 1 job will - prevent the new priority 2 job from running concurrently with the running - priority 2 job. That is: as long as there is a higher priority job waiting - to - run, no new lower priority jobs will start even if the Maximum Concurrent - Jobs settings would normally allow them to run. This ensures that higher - priority jobs will be run as soon as possible. +\item To run concurrent jobs, you must set Maximum Concurrent Jobs = 2 in 5 + or 6 distinct places: in bacula-dir.conf in the Director, the Job, the + Client, the Storage resources; in bacula-fd in the FileDaemon (or + Client) resource, and in bacula-sd.conf in the Storage resource. If any + one is missing, it will throttle the jobs to one at a time. +\item Bacula concurrently runs jobs of only one priority at a time. It + will not simultaneously run a priority 1 and a priority 2 job. +\item If Bacula is running a priority 2 job and a new priority 1 job is + scheduled, it will wait until the running priority 2 job terminates even + if the Maximum Concurrent Jobs settings would otherwise allow two jobs + to run simultaneously. +\item Suppose that bacula is running a priority 2 job and a new priority 1 + job is scheduled and queued waiting for the running priority 2 job to + terminate. If you then start a second priority 2 job, the waiting + priority 1 job will prevent the new priority 2 job from running + concurrently with the running priority 2 job. That is: as long as there + is a higher priority job waiting to run, no new lower priority jobs will + start even if the Maximum Concurrent Jobs settings would normally allow + them to run. This ensures that higher priority jobs will be run as soon + as possible. \end{itemize} If you have several jobs of different priority, it may not best to start @@ -1295,8 +1294,8 @@ correct order, and that your priority scheme will be respected. \label{WritePartAfterJob} \item [Write Part After Job = \lt{}yes|no\gt{}] - \index[dir]{Write Part After Job} - \index[dir]{Directive!Write Part After Job} +\index[dir]{Write Part After Job} +\index[dir]{Directive!Write Part After Job} This directive is only implemented in version 1.37 and later. If this directive is set to {\bf yes} (default {\bf no}), a new part file will be created after the job is finished. @@ -1359,11 +1358,11 @@ be run manually. In general, you specify an action to be taken and when. \begin{description} \item [Schedule] - \index[dir]{Schedule} - \index[dir]{Directive!Schedule} - Start of the Schedule directives. No {\bf Schedule} resource is required, -but -you will need at least one if you want Jobs to be automatically started. +\index[dir]{Schedule} +\index[dir]{Directive!Schedule} + Start of the Schedule directives. No {\bf Schedule} resource is + required, but you will need at least one if you want Jobs to be + automatically started. \item [Name = \lt{}name\gt{}] \index[dir]{Name} @@ -1373,30 +1372,31 @@ you will need at least one if you want Jobs to be automatically started. \item [Run = \lt{}Job-overrides\gt{} \lt{}Date-time-specification\gt{}] \index[dir]{Run} \index[dir]{Directive!Run} - The Run directive defines when a Job is to be run, and what overrides if any -to apply. You may specify multiple {\bf run} directives within a {\bf -Schedule} resource. If you do, they will all be applied (i.e. multiple -schedules). If you have two {\bf Run} directives that start at the same time, -two Jobs will start at the same time (well, within one second of each -other). - -The {\bf Job-overrides} permit overriding the Level, the Storage, the -Messages, and the Pool specifications provided in the Job resource. In -addition, the FullPool, the IncrementalPool, and the DifferentialPool -specifications permit overriding the Pool specification according to what -backup Job Level is in effect. - -By the use of overrides, you may customize a particular Job. For example, you -may specify a Messages override for your Incremental backups that outputs -messages to a log file, but for your weekly or monthly Full backups, you may -send the output by email by using a different Messages override. - -{\bf Job-overrides} are specified as: {\bf keyword=value} where the keyword -is Level, Storage, Messages, Pool, FullPool, DifferentialPool, or -IncrementalPool, and the {\bf value} is as defined on the respective -directive formats for the Job resource. You may specify multiple {\bf -Job-overrides} on one {\bf Run} directive by separating them with one or more -spaces or by separating them with a trailing comma. For example: + The Run directive defines when a Job is to be run, and what overrides if + any to apply. You may specify multiple {\bf run} directives within a + {\bf Schedule} resource. If you do, they will all be applied (i.e. + multiple schedules). If you have two {\bf Run} directives that start at + the same time, two Jobs will start at the same time (well, within one + second of each other). + + The {\bf Job-overrides} permit overriding the Level, the Storage, the + Messages, and the Pool specifications provided in the Job resource. In + addition, the FullPool, the IncrementalPool, and the DifferentialPool + specifications permit overriding the Pool specification according to + what backup Job Level is in effect. + + By the use of overrides, you may customize a particular Job. For + example, you may specify a Messages override for your Incremental + backups that outputs messages to a log file, but for your weekly or + monthly Full backups, you may send the output by email by using a + different Messages override. + + {\bf Job-overrides} are specified as: {\bf keyword=value} where the + keyword is Level, Storage, Messages, Pool, FullPool, DifferentialPool, + or IncrementalPool, and the {\bf value} is as defined on the respective + directive formats for the Job resource. You may specify multiple {\bf + Job-overrides} on one {\bf Run} directive by separating them with one or + more spaces or by separating them with a trailing comma. For example: \begin{description} diff --git a/docs/manual/fileset.tex b/docs/manual/fileset.tex index 4906f9cc..85864b4b 100644 --- a/docs/manual/fileset.tex +++ b/docs/manual/fileset.tex @@ -195,49 +195,54 @@ The directives within an Options resource may be one of the following: \item [compression=GZIP] \index[dir]{compression} \index[dir]{Directive!compression} - All files saved will be software compressed using the GNU ZIP compression - format. The compression is done on a file by file basis by the File daemon. - If there is a problem reading the tape in a single record of a file, it will - at most affect that file and none of the other files on the tape. Normally - this option is {\bf not} needed if you have a modern tape drive as the drive - will do its own compression. In fact, if you specify software compression at - the same time you have hardware compression turned on, your files may - actually take more space on the volume. - - Software compression is very important if you are writing your Volumes to a - file, and it can also be helpful if you have a fast computer but a slow - network, otherwise it is generally better to rely your tape drive's hardware - compression. As noted above, it is not generally a good idea to do both software - and hardware compression. - - Specifying {\bf GZIP} uses the default compression level six (i.e. {\bf GZIP} - is identical to {\bf GZIP6}). If you want a different compression level (1 - through 9), you can specify it by appending the level number with no - intervening spaces to {\bf GZIP}. Thus {\bf compression=GZIP1} would give - minimum compression but the fastest algorithm, and {\bf compression=GZIP9} - would give the highest level of compression, but requires more computation. - According to the GZIP documentation, compression levels greater than 6 - generally give very little extra compression and are rather CPU intensive. + All files saved will be software compressed using the GNU ZIP + compression format. The compression is done on a file by file basis by + the File daemon. If there is a problem reading the tape in a single + record of a file, it will at most affect that file and none of the other + files on the tape. Normally this option is {\bf not} needed if you have + a modern tape drive as the drive will do its own compression. In fact, + if you specify software compression at the same time you have hardware + compression turned on, your files may actually take more space on the + volume. + + Software compression is very important if you are writing your Volumes + to a file, and it can also be helpful if you have a fast computer but a + slow network, otherwise it is generally better to rely your tape drive's + hardware compression. As noted above, it is not generally a good idea + to do both software and hardware compression. + + Specifying {\bf GZIP} uses the default compression level six (i.e. {\bf + GZIP} is identical to {\bf GZIP6}). If you want a different compression + level (1 through 9), you can specify it by appending the level number + with no intervening spaces to {\bf GZIP}. Thus {\bf compression=GZIP1} + would give minimum compression but the fastest algorithm, and {\bf + compression=GZIP9} would give the highest level of compression, but + requires more computation. According to the GZIP documentation, + compression levels greater than 6 generally give very little extra + compression and are rather CPU intensive. \item [signature=SHA1] \index[dir]{signature} +\index[dir]{SHA1} \index[dir]{Directive!signature} - An SHA1 signature will be computed for all The SHA1 algorithm is purported to - be some what slower than the MD5 algorithm, but at the same time is - significantly better from a cryptographic point of view (i.e. much fewer - collisions, much lower probability of being hacked.) It adds four more bytes - than the MD5 signature. We strongly recommend that either this option or MD5 - be specified as a default for all files. Note, only one of the two options - MD5 or SHA1 can be computed for any file. + An SHA1 signature will be computed for all The SHA1 algorithm is + purported to be some what slower than the MD5 algorithm, but at the same + time is significantly better from a cryptographic point of view (i.e. + much fewer collisions, much lower probability of being hacked.) It adds + four more bytes than the MD5 signature. We strongly recommend that + either this option or MD5 be specified as a default for all files. + Note, only one of the two options MD5 or SHA1 can be computed for any + file. \item [signature=MD5] - \index[dir]{signature} - \index[dir]{Directive!signature} - An MD5 signature will be computed for all files saved. Adding this option - generates about 5\% extra overhead for each file saved. In addition to the - additional CPU time, the MD5 signature adds 16 more bytes per file to your - catalog. We strongly recommend that this option or the SHA1 option be - specified as a default for all files. +\index[dir]{signature} +\index[dir]{MD5} +\index[dir]{Directive!signature} + An MD5 signature will be computed for all files saved. Adding this + option generates about 5\% extra overhead for each file saved. In + addition to the additional CPU time, the MD5 signature adds 16 more + bytes per file to your catalog. We strongly recommend that this option + or the SHA1 option be specified as a default for all files. \item [verify=\lt{}options\gt{}] \index[dir]{verify} @@ -292,15 +297,15 @@ The directives within an Options resource may be one of the following: \item [onefs=yes|no] \index[dir]{onefs} \index[dir]{Directive!onefs} - If set to {\bf yes} (the default), {\bf Bacula} will remain on a single file - system. That is it will not backup file systems that are mounted on a - subdirectory. If you are using a *nix system, you may not even be aware - that there are several different filesystems as they are often - automatically mounted by the OS (e.g. /dev, /net, /sys, /proc, ...). - With Bacula 1.38.0 or later, it will inform you when it decides not - to traverse into another filesystem. This can be very useful if you - forgot to backup a particular partition. An example of the - informational message in the job report is: + If set to {\bf yes} (the default), {\bf Bacula} will remain on a single + file system. That is it will not backup file systems that are mounted + on a subdirectory. If you are using a *nix system, you may not even be + aware that there are several different filesystems as they are often + automatically mounted by the OS (e.g. /dev, /net, /sys, /proc, ...). + With Bacula 1.38.0 or later, it will inform you when it decides not to + traverse into another filesystem. This can be very useful if you forgot + to backup a particular partition. An example of the informational + message in the job report is: \footnotesize \begin{verbatim} @@ -1505,4 +1510,3 @@ estimate job= listing client= fileset=Test \normalsize to give you a listing of all files that match. - diff --git a/docs/manual/supportedchangers.tex b/docs/manual/supportedchangers.tex index b4ed554c..71d75101 100644 --- a/docs/manual/supportedchangers.tex +++ b/docs/manual/supportedchangers.tex @@ -30,7 +30,7 @@ Slot). \hline {Linux } & {Adic } & {LTO-1/2, SDLT 320 } & {Adic Scalar 24 } & {24} & {100GB } \\ \hline {Linux } & {Adic } & {LTO-2 } & {Adic FastStor 2, Sun Storedge L8 } & {8} & {200GB } \\ \hline {- } & {CA-VM } & {?? } & {Tape } & {??} & {?? } \\ - \hline {Linux } & {Dell} & {DLT VI,LTO-2} & {PowerVault 122T/132T/136T } & {-} & {100GB } \\ + \hline {Linux } & {Dell} & {DLT VI,LTO-2,LTO3} & {PowerVault 122T/132T/136T } & {-} & {100GB } \\ \hline {Linux } & {Dell} & {LTO-2} & {PowerVault 124T } & {-} & {200GB } \\ \hline {- } & {DFSMS } & {?? } & {VM RMM} & {-} & {?? } \\ \hline {Linux } & {Exabyte } & {VXA2 } & {VXA PacketLoader 1x10 2U } & {10} & {80/160GB } \\ -- 2.39.5