From b24cf8540a85a9bf97975aadd6a7542f166c78a3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Feb 2017 10:40:22 -0300 Subject: [PATCH] video: mxsfb: Fix reset hang when videomode variable is not present Currently the system hangs when the 'videomode' variable is not present and a reset command is issued: => setenv videomode => saveenv => reset (Board hangs) lcdif_power_down() assumes that the LCDIF controller has been properly configured and enabled, which may not be true. To fix this issue check whether panel.frameAdrs has been initialized and in case it has not been initialized, do not continue with the LCDIF powerdown sequence. Tested on a imx7dsabresd board. Signed-off-by: Fabio Estevam Acked-by: Anatolij Gustschin --- drivers/video/mxsfb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 3cc03cadee..32ecbe2b09 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -136,6 +136,9 @@ void lcdif_power_down(void) struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; int timeout = 1000000; + if (!panel.frameAdrs) + return; + writel(panel.frameAdrs, ®s->hw_lcdif_cur_buf_reg); writel(panel.frameAdrs, ®s->hw_lcdif_next_buf_reg); writel(LCDIF_CTRL1_VSYNC_EDGE_IRQ, ®s->hw_lcdif_ctrl1_clr); -- 2.39.5