From b2f815bb5fc02d598b31e0f3956b7cef564676d8 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 18 Jan 2018 14:36:41 -0800 Subject: [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes When flashing U-Boot on a Boston board using Xilinx Vivado tools, the final 0x00 byte which ends the .relocs section seems to be skipped & left in flash as 0xff unless the data contained in the .mcs is padded out to a 16 byte boundary. Without our final zero byte relocation will fail with an error about a spurious reloc: Avoid this problem by padding out the data in the .mcs file to a 16 byte boundary using srec_cat's -range-pad functionality. Signed-off-by: Paul Burton Cc: Daniel Schwierzeck --- board/imgtec/boston/config.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/board/imgtec/boston/config.mk b/board/imgtec/boston/config.mk index 2775727744..0ba8802da0 100644 --- a/board/imgtec/boston/config.mk +++ b/board/imgtec/boston/config.mk @@ -3,7 +3,10 @@ # quiet_cmd_srec_cat = SRECCAT $@ - cmd_srec_cat = srec_cat -output $@ -$2 $< -binary -offset $3 + cmd_srec_cat = srec_cat -output $@ -$2 \ + $< -binary \ + -fill 0x00 -within $< -binary -range-pad 16 \ + -offset $3 u-boot.mcs: u-boot.bin $(call cmd,srec_cat,intel,0x7c00000) -- 2.39.5