From b6808cd82d616bec2c357fb1b95116efe5b6f98c Mon Sep 17 00:00:00 2001 From: Shaveta Leekha Date: Wed, 28 May 2014 14:18:55 +0530 Subject: [PATCH] powerpc/serdes: Add the workaround for erratum A-007186 SerDes PLL is calibrated at reset. When the junction temperature delta from the time the PLL is calibrated exceeds +56C/-66C, jitter may increase and can cause PLL to unlock. This workaround overwrite the SerDes registers with new values, to calibrate SerDes registers. These values are known to work fine for all temperature ranges. This workaround is valid for B4, T4 and T2 platforms, so added in their config. Signed-off-by: Shaveta Leekha Signed-off-by: Poonam Aggrwal [York Sun: replaced typedef ccsr_sfp_regs_t with struct ccsr_sfp_regs] Reviewed-by: York Sun --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 + .../powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 148 ++++++++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 6 + arch/powerpc/include/asm/immap_85xx.h | 33 +++- 4 files changed, 188 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index f69c834897..3a04a89301 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -269,6 +269,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_USB14 puts("Work-around for Erratum USB14 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + puts("Work-around for Erratum A007186 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 70e09eaed5..d1fc76a13e 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -147,12 +147,43 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) return -ENODEV; } +#define BC3_SHIFT 9 +#define DC3_SHIFT 6 +#define FC3_SHIFT 0 +#define BC2_SHIFT 19 +#define DC2_SHIFT 16 +#define FC2_SHIFT 10 +#define BC1_SHIFT 29 +#define DC1_SHIFT 26 +#define FC1_SHIFT 20 +#define BC_MASK 0x1 +#define DC_MASK 0x7 +#define FC_MASK 0x3F + +#define FUSE_VAL_MASK 0x00000003 +#define FUSE_VAL_SHIFT 30 +#define CR0_DCBIAS_SHIFT 5 +#define CR1_FCAP_SHIFT 15 +#define CR1_BCAP_SHIFT 29 +#define FCAP_MASK 0x001F8000 +#define BCAP_MASK 0x20000000 +#define BCAP_OVD_MASK 0x10000000 +#define BYP_CAL_MASK 0x02000000 + u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) { ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u64 serdes_prtcl_map = 0; u32 cfg; int lane; +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + struct ccsr_sfp_regs __iomem *sfp_regs = + (struct ccsr_sfp_regs __iomem *)(CONFIG_SYS_SFP_ADDR); + u32 pll_num, pll_status, bc, dc, fc, pll_cr_upd, pll_cr0, pll_cr1; + u32 bc_status, fc_status, dc_status, pll_sr2; + serdes_corenet_t __iomem *srds_regs = (void *)sd_addr; + u32 sfp_spfr0, sel; +#endif cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; /* Is serdes enabled at all? */ @@ -161,6 +192,123 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) return 0; } +/* Erratum A-007186 + * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0) + * The workaround requires factory pre-set SerDes calibration values to be + * read from a fuse block(Freescale Scratch Pad Fuse Register SFP_FSPFR0) + * These values have been shown to work across the + * entire temperature range for all SerDes. These values are then written into + * the SerDes registers to calibrate the SerDes PLL. + * + * This workaround for the protocols and rates that only have the Ring VCO. + */ +#ifdef CONFIG_SYS_FSL_ERRATUM_A007186 + sfp_spfr0 = in_be32(&sfp_regs->fsl_spfr0); + debug("A007186: sfp_spfr0= %x\n", sfp_spfr0); + + sel = (sfp_spfr0 >> FUSE_VAL_SHIFT) & FUSE_VAL_MASK; + + if (sel == 0x01 || sel == 0x02) { + for (pll_num = 0; pll_num < SRDS_MAX_BANK; pll_num++) { + pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0); + debug("A007186: pll_num=%x pllcr0=%x\n", + pll_num, pll_status); + /* STEP 1 */ + /* Read factory pre-set SerDes calibration values + * from fuse block(SFP scratch register-sfp_spfr0) + */ + switch (pll_status & SRDS_PLLCR0_FRATE_SEL_MASK) { + case SRDS_PLLCR0_FRATE_SEL_3_0: + case SRDS_PLLCR0_FRATE_SEL_3_072: + debug("A007186: 3.0/3.072 protocol rate\n"); + bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK; + break; + case SRDS_PLLCR0_FRATE_SEL_3_125: + debug("A007186: 3.125 protocol rate\n"); + bc = (sfp_spfr0 >> BC2_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC2_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC2_SHIFT) & FC_MASK; + break; + case SRDS_PLLCR0_FRATE_SEL_3_75: + debug("A007186: 3.75 protocol rate\n"); + bc = (sfp_spfr0 >> BC1_SHIFT) & BC_MASK; + dc = (sfp_spfr0 >> DC1_SHIFT) & DC_MASK; + fc = (sfp_spfr0 >> FC1_SHIFT) & FC_MASK; + break; + default: + continue; + } + + /* STEP 2 */ + /* Write SRDSxPLLnCR1[11:16] = FC + * Write SRDSxPLLnCR1[2] = BC + */ + pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1); + pll_cr_upd = (((bc << CR1_BCAP_SHIFT) & BCAP_MASK) | + ((fc << CR1_FCAP_SHIFT) & FCAP_MASK)); + out_be32(&srds_regs->bank[pll_num].pllcr1, + (pll_cr_upd | pll_cr1)); + debug("A007186: pll_num=%x Updated PLLCR1=%x\n", + pll_num, (pll_cr_upd | pll_cr1)); + /* Write SRDSxPLLnCR0[24:26] = DC + */ + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, + pll_cr0 | (dc << CR0_DCBIAS_SHIFT)); + debug("A007186: pll_num=%x, Updated PLLCR0=%x\n", + pll_num, (pll_cr0 | (dc << CR0_DCBIAS_SHIFT))); + /* Write SRDSxPLLnCR1[3] = 1 + * Write SRDSxPLLnCR1[6] = 1 + */ + pll_cr1 = in_be32(&srds_regs->bank[pll_num].pllcr1); + pll_cr_upd = (BCAP_OVD_MASK | BYP_CAL_MASK); + out_be32(&srds_regs->bank[pll_num].pllcr1, + (pll_cr_upd | pll_cr1)); + debug("A007186: pll_num=%x Updated PLLCR1=%x\n", + pll_num, (pll_cr_upd | pll_cr1)); + + /* STEP 3 */ + /* Read the status Registers */ + /* Verify SRDSxPLLnSR2[8] = BC */ + pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2); + debug("A007186: pll_num=%x pllsr2=%x\n", + pll_num, pll_sr2); + bc_status = (pll_sr2 >> 23) & BC_MASK; + if (bc_status != bc) + debug("BC mismatch\n"); + fc_status = (pll_sr2 >> 16) & FC_MASK; + if (fc_status != fc) + debug("FC mismatch\n"); + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 | + 0x02000000); + pll_sr2 = in_be32(&srds_regs->bank[pll_num].pllsr2); + dc_status = (pll_sr2 >> 17) & DC_MASK; + if (dc_status != dc) + debug("DC mismatch\n"); + pll_cr0 = in_be32(&srds_regs->bank[pll_num].pllcr0); + out_be32(&srds_regs->bank[pll_num].pllcr0, pll_cr0 & + 0xfdffffff); + + /* STEP 4 */ + /* Wait 750us to verify the PLL is locked + * by checking SRDSxPLLnCR0[8] = 1. + */ + udelay(750); + pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0); + debug("A007186: pll_num=%x pllcr0=%x\n", + pll_num, pll_status); + + if ((pll_status & SRDS_PLLCR0_PLL_LCK) == 0) + printf("A007186 Serdes PLL not locked\n"); + else + debug("A007186 Serdes PLL locked\n"); + } + } +#endif + cfg >>= sd_prctl_shift; printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); if (!is_serdes_prtcl_valid(sd, cfg)) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index c9fd2a554a..712f2ef4b3 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -675,8 +675,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_FSL_ERRATUM_A006261 #define CONFIG_SYS_FSL_ERRATUM_A006379 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X #elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420) @@ -702,12 +704,14 @@ #define CONFIG_SYS_FSL_ERRATUM_A_004934 #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_FSL_ERRATUM_A006379 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 #define CONFIG_SYS_FSL_ERRATUM_A007075 #define CONFIG_SYS_FSL_ERRATUM_A006475 #define CONFIG_SYS_FSL_ERRATUM_A006384 #define CONFIG_SYS_FSL_ERRATUM_A007212 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 #ifdef CONFIG_PPC_B4860 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 @@ -827,8 +831,10 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A006261 #define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006379 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE +#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_PPC_C29X) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index eff573b5ad..fe1dcc27d6 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2521,14 +2521,17 @@ typedef struct serdes_corenet { #define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 #define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 #define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_PLL_LCK 0x00800000 #define SRDS_PLLCR0_DCBIAS_OUT_EN 0x02000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_4_9152 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 #define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 #define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 -#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 -#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 +#define SRDS_PLLCR0_FRATE_SEL_3_125 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3_0 0x000a0000 +#define SRDS_PLLCR0_FRATE_SEL_3_072 0x000c0000 #define SRDS_PLLCR0_DCBIAS_OVRD 0x000000F0 #define SRDS_PLLCR0_DCBIAS_OVRD_SHIFT 4 u32 pllcr1; /* PLL Control Register 1 */ @@ -2863,6 +2866,21 @@ struct ccsr_pman { u8 res_f4[0xf0c]; }; #endif +#ifdef CONFIG_SYS_FSL_SFP_VER_3_0 +struct ccsr_sfp_regs { + u32 ospr; /* 0x200 */ + u32 reserved0[14]; + u32 srk_hash[8]; /* 0x23c Super Root Key Hash */ + u32 oem_uid; /* 0x9c OEM Unique ID */ + u8 reserved2[0x04]; + u32 ovpr; /* 0xA4 Intent To Secure */ + u8 reserved4[0x08]; + u32 fsl_uid; /* 0xB0 FSL Unique ID */ + u8 reserved5[0x04]; + u32 fsl_spfr0; /* Scratch Pad Fuse Register 0 */ + u32 fsl_spfr1; /* Scratch Pad Fuse Register 1 */ +}; +#endif #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 @@ -2876,6 +2894,14 @@ struct ccsr_pman { #define CONFIG_SYS_MPC8xxx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 +#ifdef CONFIG_SYS_FSL_SFP_VER_3_0 +/* In SFPv3, OSPR register is now at offset 0x200. + * * So directly mapping sfp register map to this address */ +#define CONFIG_SYS_OSPR_OFFSET 0x200 +#define CONFIG_SYS_SFP_OFFSET (0xE8000 + CONFIG_SYS_OSPR_OFFSET) +#else +#define CONFIG_SYS_SFP_OFFSET 0xE8000 +#endif #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 #define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 @@ -3094,6 +3120,9 @@ struct ccsr_pman { #define CONFIG_SYS_PCIE4_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE4_OFFSET) +#define CONFIG_SYS_SFP_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_SFP_OFFSET) + #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) -- 2.39.5