From b79b9f198bad2c2ad58319a88bd5adca3a54b864 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 19 Mar 2018 15:20:25 -0600 Subject: [PATCH] input: Drop PS/2 keyboard support This is not used by any current board and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass --- common/board_r.c | 15 -- drivers/input/Makefile | 4 - drivers/input/keyboard.c | 87 ------- drivers/input/pc_keyb.c | 251 ------------------- drivers/input/ps2mult.c | 461 ----------------------------------- drivers/input/ps2ser.c | 147 ----------- include/keyboard.h | 27 -- include/pc_keyb.h | 121 --------- include/ps2mult.h | 56 ----- scripts/config_whitelist.txt | 4 - 10 files changed, 1173 deletions(-) delete mode 100644 drivers/input/keyboard.c delete mode 100644 drivers/input/pc_keyb.c delete mode 100644 drivers/input/ps2mult.c delete mode 100644 drivers/input/ps2ser.c delete mode 100644 include/pc_keyb.h delete mode 100644 include/ps2mult.h diff --git a/common/board_r.c b/common/board_r.c index 89f2e16b71..0f4479a58b 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -23,9 +23,6 @@ #include #include #include -#ifdef CONFIG_PS2KBD -#include -#endif #if defined(CONFIG_CMD_KGDB) #include #endif @@ -641,15 +638,6 @@ static int initr_bedbug(void) } #endif -#ifdef CONFIG_PS2KBD -static int initr_kbd(void) -{ - puts("PS/2: "); - kbd_init(); - return 0; -} -#endif - static int run_main_loop(void) { #ifdef CONFIG_SANDBOX @@ -857,9 +845,6 @@ static init_fnc_t init_sequence_r[] = { #endif #if defined(CONFIG_PRAM) initr_mem, -#endif -#ifdef CONFIG_PS2KBD - initr_kbd, #endif run_main_loop, }; diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 9109ac6dba..ee7bfc4d2c 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -12,9 +12,5 @@ obj-$(CONFIG_TEGRA_KEYBOARD) += tegra-kbc.o obj-$(CONFIG_TWL4030_INPUT) += twl4030.o obj-$(CONFIG_TWL6030_INPUT) += twl6030.o obj-$(CONFIG_CROS_EC_KEYB) += cros_ec_keyb.o -ifdef CONFIG_PS2KBD -obj-y += keyboard.o pc_keyb.o -obj-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o -endif obj-y += input.o obj-$(CONFIG_$(SPL_)OF_CONTROL) += key_matrix.o diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c deleted file mode 100644 index 84ee015cb3..0000000000 --- a/drivers/input/keyboard.c +++ /dev/null @@ -1,87 +0,0 @@ -/*********************************************************************** - * - * (C) Copyright 2004 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * - * Keyboard driver - * - ***********************************************************************/ - -#include -#include -#include - -#include -#include -#include - -static struct input_config config; - -static int kbd_read_keys(struct input_config *config) -{ -#if defined(CONFIG_ARCH_MPC8540) || \ - defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555) - /* no ISR is used, so received chars must be polled */ - ps2ser_check(); -#endif - - return 1; -} - -static int check_leds(int ret) -{ - int leds; - - leds = input_leds_changed(&config); - if (leds >= 0) - pckbd_leds(leds); - - return ret; -} - -/* test if a character is in the queue */ -static int kbd_testc(struct stdio_dev *dev) -{ - return check_leds(input_tstc(&config)); -} - -/* gets the character from the queue */ -static int kbd_getc(struct stdio_dev *dev) -{ - return check_leds(input_getc(&config)); -} - -void handle_scancode(unsigned char scan_code) -{ - bool release = false; - - /* Compare with i8042_kbd_check() in i8042.c if some logic is missing */ - if (scan_code & 0x80) { - scan_code &= 0x7f; - release = true; - } - - input_add_keycode(&config, scan_code, release); -} - -/* TODO: convert to driver model */ -int kbd_init (void) -{ - struct stdio_dev kbddev; - struct input_config *input = &config; - - if(kbd_init_hw()==-1) - return -1; - memset (&kbddev, 0, sizeof(kbddev)); - strcpy(kbddev.name, "kbd"); - kbddev.flags = DEV_FLAGS_INPUT; - kbddev.getc = kbd_getc; - kbddev.tstc = kbd_testc; - - input_init(input, 0); - input->read_keys = kbd_read_keys; - input_add_tables(input, true); - - return input_stdio_register(&kbddev); -} diff --git a/drivers/input/pc_keyb.c b/drivers/input/pc_keyb.c deleted file mode 100644 index 1606ab33ff..0000000000 --- a/drivers/input/pc_keyb.c +++ /dev/null @@ -1,251 +0,0 @@ -/*********************************************************************** - * - * (C) Copyright 2004 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * - * PS/2 keyboard driver - * - * Originally from linux source (drivers/char/pc_keyb.c) - * - ***********************************************************************/ - -#include - -#include -#include - -#undef KBG_DEBUG - -#ifdef KBG_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - - -/* - * This reads the keyboard status port, and does the - * appropriate action. - * - */ -static unsigned char handle_kbd_event(void) -{ - unsigned char status = kbd_read_status(); - unsigned int work = 10000; - - while ((--work > 0) && (status & KBD_STAT_OBF)) { - unsigned char scancode; - - scancode = kbd_read_input(); - - /* Error bytes must be ignored to make the - Synaptics touchpads compaq use work */ - /* Ignore error bytes */ - if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) { - if (status & KBD_STAT_MOUSE_OBF) - ; /* not supported: handle_mouse_event(scancode); */ - else - handle_scancode(scancode); - } - status = kbd_read_status(); - } - if (!work) - PRINTF("pc_keyb: controller jammed (0x%02X).\n", status); - return status; -} - - -static int kbd_read_data(void) -{ - int val; - unsigned char status; - - val = -1; - status = kbd_read_status(); - if (status & KBD_STAT_OBF) { - val = kbd_read_input(); - if (status & (KBD_STAT_GTO | KBD_STAT_PERR)) - val = -2; - } - return val; -} - -static int kbd_wait_for_input(void) -{ - unsigned long timeout; - int val; - - timeout = KBD_TIMEOUT; - val=kbd_read_data(); - while(val < 0) { - if(timeout--==0) - return -1; - udelay(1000); - val=kbd_read_data(); - } - return val; -} - - -static int kb_wait(void) -{ - unsigned long timeout = KBC_TIMEOUT * 10; - - do { - unsigned char status = handle_kbd_event(); - if (!(status & KBD_STAT_IBF)) - return 0; /* ok */ - udelay(1000); - timeout--; - } while (timeout); - return 1; -} - -static void kbd_write_command_w(int data) -{ - if(kb_wait()) - PRINTF("timeout in kbd_write_command_w\n"); - kbd_write_command(data); -} - -static void kbd_write_output_w(int data) -{ - if(kb_wait()) - PRINTF("timeout in kbd_write_output_w\n"); - kbd_write_output(data); -} - -static void kbd_send_data(unsigned char data) -{ - kbd_write_output_w(data); - kbd_wait_for_input(); -} - - -static char * kbd_initialize(void) -{ - int status; - - /* - * Test the keyboard interface. - * This seems to be the only way to get it going. - * If the test is successful a x55 is placed in the input buffer. - */ - kbd_write_command_w(KBD_CCMD_SELF_TEST); - if (kbd_wait_for_input() != 0x55) - return "Kbd: failed self test"; - /* - * Perform a keyboard interface test. This causes the controller - * to test the keyboard clock and data lines. The results of the - * test are placed in the input buffer. - */ - kbd_write_command_w(KBD_CCMD_KBD_TEST); - if (kbd_wait_for_input() != 0x00) - return "Kbd: interface failed self test"; - /* - * Enable the keyboard by allowing the keyboard clock to run. - */ - kbd_write_command_w(KBD_CCMD_KBD_ENABLE); - - /* - * Reset keyboard. If the read times out - * then the assumption is that no keyboard is - * plugged into the machine. - * This defaults the keyboard to scan-code set 2. - * - * Set up to try again if the keyboard asks for RESEND. - */ - do { - kbd_write_output_w(KBD_CMD_RESET); - status = kbd_wait_for_input(); - if (status == KBD_REPLY_ACK) - break; - if (status != KBD_REPLY_RESEND) { - PRINTF("status: %X\n",status); - return "Kbd: reset failed, no ACK"; - } - } while (1); - if (kbd_wait_for_input() != KBD_REPLY_POR) - return "Kbd: reset failed, no POR"; - - /* - * Set keyboard controller mode. During this, the keyboard should be - * in the disabled state. - * - * Set up to try again if the keyboard asks for RESEND. - */ - do { - kbd_write_output_w(KBD_CMD_DISABLE); - status = kbd_wait_for_input(); - if (status == KBD_REPLY_ACK) - break; - if (status != KBD_REPLY_RESEND) - return "Kbd: disable keyboard: no ACK"; - } while (1); - - kbd_write_command_w(KBD_CCMD_WRITE_MODE); - kbd_write_output_w(KBD_MODE_KBD_INT - | KBD_MODE_SYS - | KBD_MODE_DISABLE_MOUSE - | KBD_MODE_KCC); - - /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */ - kbd_write_command_w(KBD_CCMD_READ_MODE); - if (!(kbd_wait_for_input() & KBD_MODE_KCC)) { - /* - * If the controller does not support conversion, - * Set the keyboard to scan-code set 1. - */ - kbd_write_output_w(0xF0); - kbd_wait_for_input(); - kbd_write_output_w(0x01); - kbd_wait_for_input(); - } - kbd_write_output_w(KBD_CMD_ENABLE); - if (kbd_wait_for_input() != KBD_REPLY_ACK) - return "Kbd: enable keyboard: no ACK"; - - /* - * Finally, set the typematic rate to maximum. - */ - kbd_write_output_w(KBD_CMD_SET_RATE); - if (kbd_wait_for_input() != KBD_REPLY_ACK) - return "Kbd: Set rate: no ACK"; - kbd_write_output_w(0x00); - if (kbd_wait_for_input() != KBD_REPLY_ACK) - return "Kbd: Set rate: no ACK"; - return NULL; -} - -static void kbd_interrupt(void *dev_id) -{ - handle_kbd_event(); -} - -/****************************************************************** - * Init - ******************************************************************/ - -int kbd_init_hw(void) -{ - char* result; - - kbd_request_region(); - - result=kbd_initialize(); - if (result==NULL) { - PRINTF("AT Keyboard initialized\n"); - kbd_request_irq(kbd_interrupt); - return (1); - } else { - printf("%s\n",result); - return (-1); - } -} - -void pckbd_leds(unsigned char leds) -{ - kbd_send_data(KBD_CMD_SET_LEDS); - kbd_send_data(leds); -} diff --git a/drivers/input/ps2mult.c b/drivers/input/ps2mult.c deleted file mode 100644 index ab749336bf..0000000000 --- a/drivers/input/ps2mult.c +++ /dev/null @@ -1,461 +0,0 @@ -/*********************************************************************** - * - * (C) Copyright 2004 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * - * PS/2 multiplexer driver - * - * Originally from linux source (drivers/char/ps2mult.c) - * - * Uses simple serial driver (ps2ser.c) to access the multiplexer - * Used by PS/2 keyboard driver (pc_keyb.c) - * - ***********************************************************************/ - -#include - -#include -#include -#include - -/* #define DEBUG_MULT */ -/* #define DEBUG_KEYB */ - -#define KBD_STAT_DEFAULT (KBD_STAT_SELFTEST | KBD_STAT_UNLOCKED) - -#define PRINTF(format, args...) printf("ps2mult.c: " format, ## args) - -#ifdef DEBUG_MULT -#define PRINTF_MULT(format, args...) printf("PS2MULT: " format, ## args) -#else -#define PRINTF_MULT(format, args...) -#endif - -#ifdef DEBUG_KEYB -#define PRINTF_KEYB(format, args...) printf("KEYB: " format, ## args) -#else -#define PRINTF_KEYB(format, args...) -#endif - - -static ulong start_time; -static int init_done = 0; - -static int received_escape = 0; -static int received_bsync = 0; -static int received_selector = 0; - -static int kbd_command_active = 0; -static int mouse_command_active = 0; -static int ctl_command_active = 0; - -static u_char command_byte = 0; - -static void (*keyb_handler)(void *dev_id); - -static u_char ps2mult_buf [PS2BUF_SIZE]; -static atomic_t ps2mult_buf_cnt; -static int ps2mult_buf_in_idx; -static int ps2mult_buf_out_idx; - -static u_char ps2mult_buf_status [PS2BUF_SIZE]; - -#ifndef CONFIG_BOARD_EARLY_INIT_R -#error #define CONFIG_BOARD_EARLY_INIT_R and call ps2mult_early_init() in board_early_init_r() -#endif -void ps2mult_early_init (void) -{ - start_time = get_timer(0); -} - -static void ps2mult_send_byte(u_char byte, u_char sel) -{ - ps2ser_putc(sel); - - if (sel == PS2MULT_KB_SELECTOR) { - PRINTF_MULT("0x%02x send KEYBOARD\n", byte); - kbd_command_active = 1; - } else { - PRINTF_MULT("0x%02x send MOUSE\n", byte); - mouse_command_active = 1; - } - - switch (byte) { - case PS2MULT_ESCAPE: - case PS2MULT_BSYNC: - case PS2MULT_KB_SELECTOR: - case PS2MULT_MS_SELECTOR: - case PS2MULT_SESSION_START: - case PS2MULT_SESSION_END: - ps2ser_putc(PS2MULT_ESCAPE); - break; - default: - break; - } - - ps2ser_putc(byte); -} - -static void ps2mult_receive_byte(u_char byte, u_char sel) -{ - u_char status = KBD_STAT_DEFAULT; - -#if 1 /* Ignore mouse in U-Boot */ - if (sel == PS2MULT_MS_SELECTOR) return; -#endif - - if (sel == PS2MULT_KB_SELECTOR) { - if (kbd_command_active) { - if (!received_bsync) { - PRINTF_MULT("0x%02x lost KEYBOARD !!!\n", byte); - return; - } else { - kbd_command_active = 0; - received_bsync = 0; - } - } - PRINTF_MULT("0x%02x receive KEYBOARD\n", byte); - status |= KBD_STAT_IBF | KBD_STAT_OBF; - } else { - if (mouse_command_active) { - if (!received_bsync) { - PRINTF_MULT("0x%02x lost MOUSE !!!\n", byte); - return; - } else { - mouse_command_active = 0; - received_bsync = 0; - } - } - PRINTF_MULT("0x%02x receive MOUSE\n", byte); - status |= KBD_STAT_IBF | KBD_STAT_OBF | KBD_STAT_MOUSE_OBF; - } - - if (atomic_read(&ps2mult_buf_cnt) < PS2BUF_SIZE) { - ps2mult_buf_status[ps2mult_buf_in_idx] = status; - ps2mult_buf[ps2mult_buf_in_idx++] = byte; - ps2mult_buf_in_idx &= (PS2BUF_SIZE - 1); - atomic_inc(&ps2mult_buf_cnt); - } else { - PRINTF("buffer overflow\n"); - } - - if (received_bsync) { - PRINTF("unexpected BSYNC\n"); - received_bsync = 0; - } -} - -void ps2mult_callback (int in_cnt) -{ - int i; - u_char byte; - static int keyb_handler_active = 0; - - if (!init_done) { - return; - } - - for (i = 0; i < in_cnt; i ++) { - byte = ps2ser_getc(); - - if (received_escape) { - ps2mult_receive_byte(byte, received_selector); - received_escape = 0; - } else switch (byte) { - case PS2MULT_ESCAPE: - PRINTF_MULT("ESCAPE receive\n"); - received_escape = 1; - break; - - case PS2MULT_BSYNC: - PRINTF_MULT("BSYNC receive\n"); - received_bsync = 1; - break; - - case PS2MULT_KB_SELECTOR: - case PS2MULT_MS_SELECTOR: - PRINTF_MULT("%s receive\n", - byte == PS2MULT_KB_SELECTOR ? "KB_SEL" : "MS_SEL"); - received_selector = byte; - break; - - case PS2MULT_SESSION_START: - case PS2MULT_SESSION_END: - PRINTF_MULT("%s receive\n", - byte == PS2MULT_SESSION_START ? - "SESSION_START" : "SESSION_END"); - break; - - default: - ps2mult_receive_byte(byte, received_selector); - } - } - - if (keyb_handler && !keyb_handler_active && - atomic_read(&ps2mult_buf_cnt)) { - keyb_handler_active = 1; - keyb_handler(NULL); - keyb_handler_active = 0; - } -} - -u_char ps2mult_read_status(void) -{ - u_char byte; - - if (atomic_read(&ps2mult_buf_cnt) == 0) { - ps2ser_check(); - } - - if (atomic_read(&ps2mult_buf_cnt)) { - byte = ps2mult_buf_status[ps2mult_buf_out_idx]; - } else { - byte = KBD_STAT_DEFAULT; - } - PRINTF_KEYB("read_status()=0x%02x\n", byte); - return byte; -} - -u_char ps2mult_read_input(void) -{ - u_char byte = 0; - - if (atomic_read(&ps2mult_buf_cnt) == 0) { - ps2ser_check(); - } - - if (atomic_read(&ps2mult_buf_cnt)) { - byte = ps2mult_buf[ps2mult_buf_out_idx++]; - ps2mult_buf_out_idx &= (PS2BUF_SIZE - 1); - atomic_dec(&ps2mult_buf_cnt); - } - PRINTF_KEYB("read_input()=0x%02x\n", byte); - return byte; -} - -void ps2mult_write_output(u_char val) -{ - int i; - - PRINTF_KEYB("write_output(0x%02x)\n", val); - - for (i = 0; i < KBD_TIMEOUT; i++) { - if (!kbd_command_active && !mouse_command_active) { - break; - } - udelay(1000); - ps2ser_check(); - } - - if (kbd_command_active) { - PRINTF("keyboard command not acknoledged\n"); - kbd_command_active = 0; - } - - if (mouse_command_active) { - PRINTF("mouse command not acknoledged\n"); - mouse_command_active = 0; - } - - if (ctl_command_active) { - switch (ctl_command_active) { - case KBD_CCMD_WRITE_MODE: - /* Scan code conversion not supported */ - command_byte = val & ~KBD_MODE_KCC; - break; - - case KBD_CCMD_WRITE_AUX_OBUF: - ps2mult_receive_byte(val, PS2MULT_MS_SELECTOR); - break; - - case KBD_CCMD_WRITE_MOUSE: - ps2mult_send_byte(val, PS2MULT_MS_SELECTOR); - break; - - default: - PRINTF("invalid controller command\n"); - break; - } - - ctl_command_active = 0; - return; - } - - ps2mult_send_byte(val, PS2MULT_KB_SELECTOR); -} - -void ps2mult_write_command(u_char val) -{ - ctl_command_active = 0; - - PRINTF_KEYB("write_command(0x%02x)\n", val); - - switch (val) { - case KBD_CCMD_READ_MODE: - ps2mult_receive_byte(command_byte, PS2MULT_KB_SELECTOR); - break; - - case KBD_CCMD_WRITE_MODE: - ctl_command_active = val; - break; - - case KBD_CCMD_MOUSE_DISABLE: - break; - - case KBD_CCMD_MOUSE_ENABLE: - break; - - case KBD_CCMD_SELF_TEST: - ps2mult_receive_byte(0x55, PS2MULT_KB_SELECTOR); - break; - - case KBD_CCMD_KBD_TEST: - ps2mult_receive_byte(0x00, PS2MULT_KB_SELECTOR); - break; - - case KBD_CCMD_KBD_DISABLE: - break; - - case KBD_CCMD_KBD_ENABLE: - break; - - case KBD_CCMD_WRITE_AUX_OBUF: - ctl_command_active = val; - break; - - case KBD_CCMD_WRITE_MOUSE: - ctl_command_active = val; - break; - - default: - PRINTF("invalid controller command\n"); - break; - } -} - -static int ps2mult_getc_w (void) -{ - int res = -1; - int i; - - for (i = 0; i < KBD_TIMEOUT; i++) { - if (ps2ser_check()) { - res = ps2ser_getc(); - break; - } - udelay(1000); - } - - switch (res) { - case PS2MULT_KB_SELECTOR: - case PS2MULT_MS_SELECTOR: - received_selector = res; - break; - default: - break; - } - - return res; -} - -int ps2mult_init (void) -{ - int byte; - int kbd_found = 0; - int mouse_found = 0; - - while (get_timer(start_time) < CONFIG_PS2MULT_DELAY); - - ps2ser_init(); - - ps2ser_putc(PS2MULT_SESSION_START); - - ps2ser_putc(PS2MULT_KB_SELECTOR); - ps2ser_putc(KBD_CMD_RESET); - - do { - byte = ps2mult_getc_w(); - } while (byte >= 0 && byte != KBD_REPLY_ACK); - - if (byte == KBD_REPLY_ACK) { - byte = ps2mult_getc_w(); - if (byte == 0xaa) { - kbd_found = 1; - puts("keyboard"); - } - } - - if (!kbd_found) { - while (byte >= 0) { - byte = ps2mult_getc_w(); - } - } - -#if 1 /* detect mouse */ - ps2ser_putc(PS2MULT_MS_SELECTOR); - ps2ser_putc(AUX_RESET); - - do { - byte = ps2mult_getc_w(); - } while (byte >= 0 && byte != AUX_ACK); - - if (byte == AUX_ACK) { - byte = ps2mult_getc_w(); - if (byte == 0xaa) { - byte = ps2mult_getc_w(); - if (byte == 0x00) { - mouse_found = 1; - puts(", mouse"); - } - } - } - - if (!mouse_found) { - while (byte >= 0) { - byte = ps2mult_getc_w(); - } - } -#endif - - if (mouse_found || kbd_found) { - if (!received_selector) { - if (mouse_found) { - received_selector = PS2MULT_MS_SELECTOR; - } else { - received_selector = PS2MULT_KB_SELECTOR; - } - } - - init_done = 1; - } else { - puts("No device found"); - } - - puts("\n"); - -#if 0 /* for testing */ - { - int i; - u_char key[] = { - 0x1f, 0x12, 0x14, 0x12, 0x31, 0x2f, 0x39, /* setenv */ - 0x1f, 0x14, 0x20, 0x17, 0x31, 0x39, /* stdin */ - 0x1f, 0x12, 0x13, 0x17, 0x1e, 0x26, 0x1c, /* serial */ - }; - - for (i = 0; i < sizeof (key); i++) { - ps2mult_receive_byte (key[i], PS2MULT_KB_SELECTOR); - ps2mult_receive_byte (key[i] | 0x80, PS2MULT_KB_SELECTOR); - } - } -#endif - - return init_done ? 0 : -1; -} - -int ps2mult_request_irq(void (*handler)(void *)) -{ - keyb_handler = handler; - - return 0; -} diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c deleted file mode 100644 index 0b5ce06853..0000000000 --- a/drivers/input/ps2ser.c +++ /dev/null @@ -1,147 +0,0 @@ -/*********************************************************************** - * - * (C) Copyright 2004-2009 - * DENX Software Engineering - * Wolfgang Denk, wd@denx.de - * - * Simple 16550A serial driver - * - * Originally from linux source (drivers/char/ps2ser.c) - * - * Used by the PS/2 multiplexer driver (ps2mult.c) - * - ***********************************************************************/ - -#include - -#include -#include -#include -/* This is needed for ns16550.h */ -#ifndef CONFIG_SYS_NS16550_REG_SIZE -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* #define DEBUG */ - -#define PS2SER_BAUD 57600 - -#if CONFIG_PS2SERIAL == 1 -#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500) -#elif CONFIG_PS2SERIAL == 2 -#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600) -#else -#error CONFIG_PS2SERIAL must be in 1 ... 2 -#endif - -static int ps2ser_getc_hw(void); -static void ps2ser_interrupt(void *dev_id); - -extern struct serial_state rs_table[]; /* in serial.c */ - -static u_char ps2buf[PS2BUF_SIZE]; -static atomic_t ps2buf_cnt; -static int ps2buf_in_idx; -static int ps2buf_out_idx; - -int ps2ser_init(void) -{ - NS16550_t com_port = (NS16550_t)COM_BASE; - - com_port->ier = 0x00; - com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1; - com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff; - com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff; - com_port->lcr = UART_LCR_8N1; - com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS); - com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR); - - return (0); -} - -void ps2ser_putc(int chr) -{ - NS16550_t com_port = (NS16550_t)COM_BASE; - debug(">>>> 0x%02x\n", chr); - - while ((com_port->lsr & UART_LSR_THRE) == 0); - com_port->thr = chr; -} - -static int ps2ser_getc_hw(void) -{ - NS16550_t com_port = (NS16550_t)COM_BASE; - int res = -1; - - if (com_port->lsr & UART_LSR_DR) { - res = com_port->rbr; - } - - return res; -} - -int ps2ser_getc(void) -{ - volatile int chr; - int flags; - - debug("<< "); - - flags = disable_interrupts(); - - do { - if (atomic_read(&ps2buf_cnt) != 0) { - chr = ps2buf[ps2buf_out_idx++]; - ps2buf_out_idx &= (PS2BUF_SIZE - 1); - atomic_dec(&ps2buf_cnt); - } else { - chr = ps2ser_getc_hw(); - } - } - while (chr < 0); - - if (flags) - enable_interrupts(); - - debug("0x%02x\n", chr); - - return chr; -} - -int ps2ser_check(void) -{ - int flags; - - flags = disable_interrupts(); - ps2ser_interrupt(NULL); - if (flags) enable_interrupts(); - - return atomic_read(&ps2buf_cnt); -} - -static void ps2ser_interrupt(void *dev_id) -{ - NS16550_t com_port = (NS16550_t)COM_BASE; - int chr; - int status; - - do { - chr = ps2ser_getc_hw(); - status = com_port->lsr; - if (chr < 0) continue; - - if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) { - ps2buf[ps2buf_in_idx++] = chr; - ps2buf_in_idx &= (PS2BUF_SIZE - 1); - atomic_inc(&ps2buf_cnt); - } else { - printf ("ps2ser.c: buffer overflow\n"); - } - } while (status & UART_LSR_DR); - if (atomic_read(&ps2buf_cnt)) { - ps2mult_callback(atomic_read(&ps2buf_cnt)); - } -} diff --git a/include/keyboard.h b/include/keyboard.h index 9b51e20322..7561954f75 100644 --- a/include/keyboard.h +++ b/include/keyboard.h @@ -1,7 +1,6 @@ #ifndef __KEYBOARD_H #define __KEYBOARD_H -#ifdef CONFIG_DM_KEYBOARD #include #include @@ -77,30 +76,4 @@ struct keyboard_ops { #define keyboard_get_ops(dev) ((struct keyboard_ops *)(dev)->driver->ops) -#else - -#ifdef CONFIG_PS2MULT -#include -#endif - -#if !defined(kbd_request_region) || \ - !defined(kbd_request_irq) || \ - !defined(kbd_read_input) || \ - !defined(kbd_read_status) || \ - !defined(kbd_write_output) || \ - !defined(kbd_write_command) -#error PS/2 low level routines not defined -#endif - -extern int kbd_init (void); -extern void handle_scancode(unsigned char scancode); -extern int kbd_init_hw(void); -extern void pckbd_leds(unsigned char leds); -#endif /* !CONFIG_DM_KEYBOARD */ - -#if defined(CONFIG_ARCH_MPC8540) || \ - defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555) -int ps2ser_check(void); -#endif - #endif /* __KEYBOARD_H */ diff --git a/include/pc_keyb.h b/include/pc_keyb.h deleted file mode 100644 index 5ba99e35a2..0000000000 --- a/include/pc_keyb.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/linux/pc_keyb.h - * - * PC Keyboard And Keyboard Controller - * - * (c) 1997 Martin Mares - */ - -/* - * Configuration Switches - */ -#undef KBD_REPORT_ERR /* Report keyboard errors */ -#define KBD_REPORT_UNKN /* Report unknown scan codes */ -#define KBD_REPORT_TIMEOUTS /* Report keyboard timeouts */ -#undef KBD_IS_FOCUS_9000 /* We have the brain-damaged FOCUS-9000 keyboard */ -#undef INITIALIZE_MOUSE /* Define if your PS/2 mouse needs initialization. */ - -#define KBD_INIT_TIMEOUT 1000 /* Timeout in ms for initializing the keyboard */ -#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */ -#define KBD_TIMEOUT 1000 /* Timeout in ms for keyboard command acknowledge */ - -/* - * Internal variables of the driver - */ -extern unsigned char pckbd_read_mask; -extern unsigned char aux_device_present; - -/* - * Keyboard Controller Registers on normal PCs. - */ -#define KBD_STATUS_REG 0x64 /* Status register (R) */ -#define KBD_CNTL_REG 0x64 /* Controller command register (W) */ -#define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */ - -/* - * Keyboard Controller Commands - */ -#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ -#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ -#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ -#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ -#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ -#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ -#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ -#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ -#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ -#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ -#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if - initiated by the auxiliary device */ -#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ - -/* - * Keyboard Commands - */ -#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ -#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ -#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ -#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */ -#define KBD_CMD_RESET 0xFF /* Reset */ - -/* - * Keyboard Replies - */ -#define KBD_REPLY_POR 0xAA /* Power on reset */ -#define KBD_REPLY_ACK 0xFA /* Command ACK */ -#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ - -/* - * Status Register Bits - */ -#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ -#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ -#define KBD_STAT_SELFTEST 0x04 /* Self test successful */ -#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ -#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ -#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ -#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ -#define KBD_STAT_PERR 0x80 /* Parity error */ - -#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF) - -/* - * Controller Mode Register Bits - */ -#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ -#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ -#define KBD_MODE_SYS 0x04 /* The system flag (?) */ -#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ -#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ -#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ -#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ -#define KBD_MODE_RFU 0x80 - -/* - * Mouse Commands - */ -#define AUX_SET_RES 0xE8 /* Set resolution */ -#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ -#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ -#define AUX_GET_SCALE 0xE9 /* Get scaling factor */ -#define AUX_SET_STREAM 0xEA /* Set stream mode */ -#define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ -#define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ -#define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ -#define AUX_RESET 0xFF /* Reset aux device */ -#define AUX_ACK 0xFA /* Command byte ACK. */ - -#define AUX_BUF_SIZE 2048 /* This might be better divisible by - three to make overruns stay in sync - but then the read function would need - a lock etc - ick */ - -#if 0 -struct aux_queue { - unsigned long head; - unsigned long tail; - wait_queue_head_t proc_list; - struct fasync_struct *fasync; - unsigned char buf[AUX_BUF_SIZE]; -}; -#endif diff --git a/include/ps2mult.h b/include/ps2mult.h deleted file mode 100644 index 1a38733b76..0000000000 --- a/include/ps2mult.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef __LINUX_PS2MULT_H -#define __LINUX_PS2MULT_H - -#define kbd_request_region() ps2mult_init() -#define kbd_request_irq(handler) ps2mult_request_irq(handler) - -#define kbd_read_input() ps2mult_read_input() -#define kbd_read_status() ps2mult_read_status() -#define kbd_write_output(val) ps2mult_write_output(val) -#define kbd_write_command(val) ps2mult_write_command(val) - -#define aux_request_irq(hand, dev_id) 0 -#define aux_free_irq(dev_id) - -#define PS2MULT_KB_SELECTOR 0xA0 -#define PS2MULT_MS_SELECTOR 0xA1 -#define PS2MULT_ESCAPE 0x7D -#define PS2MULT_BSYNC 0x7E -#define PS2MULT_SESSION_START 0x55 -#define PS2MULT_SESSION_END 0x56 - -#define PS2BUF_SIZE 512 /* power of 2, please */ - -#ifndef CONFIG_PS2MULT_DELAY -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#endif - - /* PS/2 controller interface (include/asm/keyboard.h) - */ -extern int ps2mult_init (void); -extern int ps2mult_request_irq(void (*handler)(void *)); -extern u_char ps2mult_read_input(void); -extern u_char ps2mult_read_status(void); -extern void ps2mult_write_output(u_char val); -extern void ps2mult_write_command(u_char val); - -extern void ps2mult_early_init (void); -extern void ps2mult_callback (int in_cnt); - - /* Simple serial interface - */ -extern int ps2ser_init(void); -extern void ps2ser_putc(int chr); -extern int ps2ser_getc(void); -extern int ps2ser_check(void); - - - /* Serial related stuff - */ -struct serial_state { - int baud_base; - int irq; - u8 *iomem_base; -}; - -#endif /* __LINUX_PS2MULT_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 88494bf615..e549708215 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1625,10 +1625,6 @@ CONFIG_PROG_UBOOT1 CONFIG_PROG_UBOOT2 CONFIG_PROOF_POINTS CONFIG_PRPMC_PCI_ALIAS -CONFIG_PS2KBD -CONFIG_PS2MULT -CONFIG_PS2MULT_DELAY -CONFIG_PS2SERIAL CONFIG_PSRAM_SCFG CONFIG_PWM CONFIG_PWM_IMX -- 2.39.5