From b805b1746607d4d13ac0e222402b3d34c94e154e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sun, 7 May 2017 02:43:06 +0530 Subject: [PATCH] engicam: Move uart mux init to SPL Since, u-boot handle fdt through uart so move the UART code to SPL instead make it to global area. Cc: Stefano Babic Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki --- board/engicam/geam6ul/geam6ul.c | 27 +++++++++---------------- board/engicam/icorem6/icorem6.c | 27 +++++++++---------------- board/engicam/icorem6_rqs/icorem6_rqs.c | 27 +++++++++---------------- board/engicam/isiotmx6ul/isiotmx6ul.c | 27 +++++++++---------------- 4 files changed, 40 insertions(+), 68 deletions(-) diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c index eb0e533dfe..c3d92ace76 100644 --- a/board/engicam/geam6ul/geam6ul.c +++ b/board/engicam/geam6ul/geam6ul.c @@ -22,22 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - - return 0; -} - #ifdef CONFIG_NAND_MXS #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) @@ -173,6 +157,15 @@ int dram_init(void) #include #include +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + /* MMC board initialization is needed till adding DM support in SPL */ #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) #include @@ -341,7 +334,7 @@ void board_init_f(ulong dummy) ccgr_init(); /* iomux and setup of i2c */ - board_early_init_f(); + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); /* setup GP timer */ timer_init(); diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c index c8aaad1bfc..8c62f0ec34 100644 --- a/board/engicam/icorem6/icorem6.c +++ b/board/engicam/icorem6/icorem6.c @@ -23,15 +23,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart4_pads[] = { - IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - #ifdef CONFIG_NAND_MXS #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) @@ -199,13 +190,6 @@ static void setup_display(void) } #endif /* CONFIG_VIDEO_IPUV3 */ -int board_early_init_f(void) -{ - SETUP_IOMUX_PADS(uart4_pads); - - return 0; -} - #ifdef CONFIG_ENV_IS_IN_MMC static void mmc_late_init(void) { @@ -281,6 +265,15 @@ int dram_init(void) #include #include +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart4_pads[] = { + IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + /* MMC board initialization is needed till adding DM support in SPL */ #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) #include @@ -617,7 +610,7 @@ void board_init_f(ulong dummy) gpr_init(); /* iomux */ - board_early_init_f(); + SETUP_IOMUX_PADS(uart4_pads); /* setup GP timer */ timer_init(); diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c index 2027b283ac..d6ca62d0aa 100644 --- a/board/engicam/icorem6_rqs/icorem6_rqs.c +++ b/board/engicam/icorem6_rqs/icorem6_rqs.c @@ -22,22 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart4_pads[] = { - IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - -int board_early_init_f(void) -{ - SETUP_IOMUX_PADS(uart4_pads); - - return 0; -} - int board_init(void) { /* Address of boot parameters */ @@ -110,6 +94,15 @@ int dram_init(void) #include #include +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart4_pads[] = { + IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + /* MMC board initialization is needed till adding DM support in SPL */ #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) #include @@ -488,7 +481,7 @@ void board_init_f(ulong dummy) gpr_init(); /* iomux */ - board_early_init_f(); + SETUP_IOMUX_PADS(uart4_pads); /* setup GP timer */ timer_init(); diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c index 5d1c693e22..008a7ae25f 100644 --- a/board/engicam/isiotmx6ul/isiotmx6ul.c +++ b/board/engicam/isiotmx6ul/isiotmx6ul.c @@ -22,22 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - - return 0; -} - #ifdef CONFIG_NAND_MXS #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) @@ -185,6 +169,15 @@ int dram_init(void) #include #include +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + /* MMC board initialization is needed till adding DM support in SPL */ #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) #include @@ -402,7 +395,7 @@ void board_init_f(ulong dummy) ccgr_init(); /* iomux and setup of i2c */ - board_early_init_f(); + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); /* setup GP timer */ timer_init(); -- 2.39.5