From bcca8aa9ee43be0f0bf7c14ce34cfbbd891c373e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 6 Apr 2018 16:27:54 -0400 Subject: [PATCH] imx31_phycore: Delete This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini --- arch/arm/Kconfig | 12 --- board/imx31_phycore/Kconfig | 12 --- board/imx31_phycore/MAINTAINERS | 11 -- board/imx31_phycore/Makefile | 9 -- board/imx31_phycore/imx31_phycore.c | 154 --------------------------- board/imx31_phycore/lowlevel_init.S | 88 ---------------- configs/imx31_phycore_defconfig | 19 ---- configs/imx31_phycore_eet_defconfig | 25 ----- drivers/video/Makefile | 1 - drivers/video/s6e63d6.c | 60 ----------- include/configs/imx31_phycore.h | 156 ---------------------------- include/s6e63d6.h | 21 ---- 12 files changed, 568 deletions(-) delete mode 100644 board/imx31_phycore/Kconfig delete mode 100644 board/imx31_phycore/MAINTAINERS delete mode 100644 board/imx31_phycore/Makefile delete mode 100644 board/imx31_phycore/imx31_phycore.c delete mode 100644 board/imx31_phycore/lowlevel_init.S delete mode 100644 configs/imx31_phycore_defconfig delete mode 100644 configs/imx31_phycore_eet_defconfig delete mode 100644 drivers/video/s6e63d6.c delete mode 100644 include/configs/imx31_phycore.h delete mode 100644 include/s6e63d6.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c52ff025a..056dacc16f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -444,17 +444,6 @@ config TARGET_X600 select SUPPORT_SPL select PL011_SERIAL -config TARGET_IMX31_PHYCORE - bool "Support imx31_phycore_eet" - select CPU_ARM1136 - select BOARD_EARLY_INIT_F - -config TARGET_IMX31_PHYCORE_EET - bool "Support imx31_phycore_eet" - select BOARD_LATE_INIT - select CPU_ARM1136 - select BOARD_EARLY_INIT_F - config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 @@ -1317,7 +1306,6 @@ source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/poplar/Kconfig" -source "board/imx31_phycore/Kconfig" source "board/isee/igep003x/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/silica/pengwyn/Kconfig" diff --git a/board/imx31_phycore/Kconfig b/board/imx31_phycore/Kconfig deleted file mode 100644 index e897ee1c3a..0000000000 --- a/board/imx31_phycore/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_IMX31_PHYCORE || TARGET_IMX31_PHYCORE_EET - -config SYS_BOARD - default "imx31_phycore" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "imx31_phycore" - -endif diff --git a/board/imx31_phycore/MAINTAINERS b/board/imx31_phycore/MAINTAINERS deleted file mode 100644 index 41f6cae81b..0000000000 --- a/board/imx31_phycore/MAINTAINERS +++ /dev/null @@ -1,11 +0,0 @@ -IMX31_PHYCORE BOARD -#M: - -S: Maintained -F: board/imx31_phycore/ -F: include/configs/imx31_phycore.h -F: configs/imx31_phycore_defconfig - -IMX31_PHYCORE_EET BOARD -#M: (resigned) Guennadi Liakhovetski -S: Orphan (since 2013-09) -F: configs/imx31_phycore_eet_defconfig diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile deleted file mode 100644 index e781c13936..0000000000 --- a/board/imx31_phycore/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx31_phycore.o -obj-y += lowlevel_init.o diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c deleted file mode 100644 index 653246615f..0000000000 --- a/board/imx31_phycore/imx31_phycore.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_init(void) -{ - - gd->bd->bi_arch_number = MACH_TYPE_PCM037; /* board id for linux */ - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - return 0; -} - -int board_early_init_f(void) -{ - /* CS0: Nor Flash */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0) - }; - - /* CS1: Network Controller */ - static const struct mxc_weimcs cs1 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - /* CS4: SRAM */ - static const struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(0, &cs0); - mxc_setup_weimcs(1, &cs1); - mxc_setup_weimcs(4, &cs4); - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* setup pins for I2C2 (for EEPROM, RTC) */ - mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL); - mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#ifdef CONFIG_S6E63D6 - struct s6e63d6 data = { - /* - * See comment in mxc_spi.c::decode_cs() for .cs field format. - * We use GPIO 57 as a chipselect for the S6E63D6 and chipselect - * 2 of the SPI controller #1, since it is unused. - */ - .cs = 2 | (57 << 8), - .bus = 0, - .id = 0, - }; - int ret; - - /* SPI1 */ - mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK); - mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B); - mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI); - mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO); - mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B); - mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B); - mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B); - - /* start SPI1 clock */ - __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2); - - /* GPIO 57 */ - /* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */ - mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO)); - - /* SPI1 CS2 is free */ - ret = s6e63d6_init(&data); - if (ret) - return ret; - - /* - * This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC - * OLED display connected to a S6E63D6 SPI display controller in the - * 18 bit RGB mode - */ - s6e63d6_index(&data, 2); - s6e63d6_param(&data, 0x0182); - s6e63d6_index(&data, 3); - s6e63d6_param(&data, 0x8130); - s6e63d6_index(&data, 0x10); - s6e63d6_param(&data, 0x0000); - s6e63d6_index(&data, 5); - s6e63d6_param(&data, 0x0001); - s6e63d6_index(&data, 0x22); -#endif - return 0; -} -#endif - -int checkboard (void) -{ - printf("Board: Phytec phyCore i.MX31\n"); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S deleted file mode 100644 index 6ea3878ef9..0000000000 --- a/board/imx31_phycore/lowlevel_init.S +++ /dev/null @@ -1,88 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.globl lowlevel_init -lowlevel_init: - - REG IPU_CONF, IPU_CONF_DI_EN - REG CCM_CCMR, 0x074B0BF5 - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0) - - REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd) - - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1) - - REG 0x43FAC26C, 0 /* SDCLK */ - REG 0x43FAC270, 0 /* CAS */ - REG 0x43FAC274, 0 /* RAS */ - REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */ - REG 0x43FAC284, 0 /* DQM3 */ - REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - REG 0x43FAC28C, 0 - REG 0x43FAC290, 0 - REG 0x43FAC294, 0 - REG 0x43FAC298, 0 - REG 0x43FAC29C, 0 - REG 0x43FAC2A0, 0 - REG 0x43FAC2A4, 0 - REG 0x43FAC2A8, 0 - REG 0x43FAC2AC, 0 - REG 0x43FAC2B0, 0 - REG 0x43FAC2B4, 0 - REG 0x43FAC2B8, 0 - REG 0x43FAC2BC, 0 - REG 0x43FAC2C0, 0 - REG 0x43FAC2C4, 0 - REG 0x43FAC2C8, 0 - REG 0x43FAC2CC, 0 - REG 0x43FAC2D0, 0 - REG 0x43FAC2D4, 0 - REG 0x43FAC2D8, 0 - REG 0x43FAC2DC, 0 - REG 0xB8001010, 0x00000004 - REG 0xB8001004, 0x006ac73a - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - REG 0xB8001000, 0x82226080 - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - - mov pc, lr diff --git a/configs/imx31_phycore_defconfig b/configs/imx31_phycore_defconfig deleted file mode 100644 index bd5717bb89..0000000000 --- a/configs/imx31_phycore_defconfig +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_PHYCORE=y -CONFIG_SYS_TEXT_BASE=0xA0000000 -CONFIG_BOOTDELAY=3 -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="uboot> " -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" -CONFIG_ENV_IS_IN_EEPROM=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_NETDEVICES=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0xa8000000 -CONFIG_SMC911X_32_BIT=y diff --git a/configs/imx31_phycore_eet_defconfig b/configs/imx31_phycore_eet_defconfig deleted file mode 100644 index 7be4f899a8..0000000000 --- a/configs/imx31_phycore_eet_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_PHYCORE_EET=y -CONFIG_SYS_TEXT_BASE=0xA0000000 -CONFIG_BOOTDELAY=3 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_SPI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" -CONFIG_ENV_IS_IN_EEPROM=y -CONFIG_MXC_GPIO=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_NETDEVICES=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0xa8000000 -CONFIG_SMC911X_32_BIT=y -CONFIG_MXC_SPI=y -CONFIG_VIDEO=y diff --git a/drivers/video/Makefile b/drivers/video/Makefile index dfafe08fc5..ab897e145c 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o obj-$(CONFIG_PXA_LCD) += pxa_lcd.o obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o obj-$(CONFIG_S6E8AX0) += s6e8ax0.o -obj-$(CONFIG_S6E63D6) += s6e63d6.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o diff --git a/drivers/video/s6e63d6.c b/drivers/video/s6e63d6.c deleted file mode 100644 index f077260d76..0000000000 --- a/drivers/video/s6e63d6.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include - -/* - * Each transfer is performed as: - * 1. chip-select active - * 2. send 8-bit start code - * 3. send 16-bit data - * 4. chip-select inactive - */ -static int send_word(struct s6e63d6 *data, u8 rs, u16 word) -{ - /* - * The start byte looks like (binary): - * 01110 - * RS is 0 for index or 1 for data, and R/W is 0 for write. - */ - u32 buf8 = 0x70 | data->id | (rs & 2); - u32 buf16 = cpu_to_le16(word); - u32 buf_in; - int err; - - err = spi_xfer(data->slave, 8, &buf8, &buf_in, SPI_XFER_BEGIN); - if (err) - return err; - - return spi_xfer(data->slave, 16, &buf16, &buf_in, SPI_XFER_END); -} - -/* Index and param differ in Register Select bit */ -int s6e63d6_index(struct s6e63d6 *data, u8 idx) -{ - return send_word(data, 0, idx); -} - -int s6e63d6_param(struct s6e63d6 *data, u16 param) -{ - return send_word(data, 2, param); -} - -int s6e63d6_init(struct s6e63d6 *data) -{ - if (data->id != 0 && data->id != 4) { - printf("s6e63d6: invalid ID %u\n", data->id); - return 1; - } - - data->slave = spi_setup_slave(data->bus, data->cs, 100000, SPI_MODE_3); - if (!data->slave) - return 1; - - return 0; -} diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h deleted file mode 100644 index 3b5eb4fa6c..0000000000 --- a/include/configs/imx31_phycore.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff - * Kshitij Gupta - * - * Configuration settings for the phyCORE-i.MX31 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* High Level Configuration Options */ -#define CONFIG_MX31 /* This is a mx31 */ -#define CONFIG_MX31_CLK32 32000 - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 - -/*********************************************************** - * Command definition - ***********************************************************/ - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.23.168 -#define CONFIG_SERVERIP 192.168.23.2 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ - "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootargs_flash=setenv bootargs $(bootargs) " \ - "root=/dev/mtdblock2 rootfstype=jffs2\0" \ - "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \ - "tftpboot 0x80000000 $(uimage);bootm\0" \ - "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \ - "bootm 0x80000000\0" \ - "unlock=yes\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "prg_uboot=tftpboot 0x80000000 $(uboot);" \ - "protect off 0xa0000000 +0x20000;" \ - "erase 0xa0000000 +0x20000;" \ - "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ - "prg_kernel=tftpboot 0x80000000 $(uimage);" \ - "erase 0xa0040000 +0x180000;" \ - "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ - "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \ - "erase 0xa01c0000 0xa1ffffff;" \ - "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ - "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \ - "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \ - "sync:1241513985,vmode:0\0" - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE 0xa0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */ -/* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */ -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */ - -/* - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ - -/* - * Timeout for Flash Erase and Flash Write - * timeout values are in ticks - */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) - -/* - * JFFS2 partitions - */ -#define CONFIG_JFFS2_DEV "nor0" - -/* EET platform additions */ -#ifdef CONFIG_TARGET_IMX31_PHYCORE_EET -#define CONFIG_HARD_SPI - -#define CONFIG_S6E63D6 - -#define CONFIG_VIDEO_MX3 -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_BMP_16BPP -#endif - -#endif /* __CONFIG_H */ diff --git a/include/s6e63d6.h b/include/s6e63d6.h deleted file mode 100644 index aa583eed1b..0000000000 --- a/include/s6e63d6.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _S6E63D6_H_ -#define _S6E63D6_H_ - -struct s6e63d6 { - unsigned int bus; - unsigned int cs; - unsigned int id; - struct spi_slave *slave; -}; - -extern int s6e63d6_init(struct s6e63d6 *data); -extern int s6e63d6_index(struct s6e63d6 *data, u8 idx); -extern int s6e63d6_param(struct s6e63d6 *data, u16 param); - -#endif -- 2.39.5