From bf9a521529e484b15e8fdb583a607cf7945d2f6b Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Fri, 12 Jun 2009 11:29:00 +0000 Subject: [PATCH] ColdFire: Add M5208EVB and MCF520x CPU support Signed-off-by: TsiChung Liew --- MAKEALL | 1 + Makefile | 3 + board/freescale/m5208evbe/Makefile | 44 ++++ board/freescale/m5208evbe/config.mk | 25 ++ board/freescale/m5208evbe/m5208evbe.c | 94 +++++++ board/freescale/m5208evbe/u-boot.lds | 142 ++++++++++ cpu/mcf52x2/config.mk | 4 + cpu/mcf52x2/cpu.c | 66 +++++ cpu/mcf52x2/cpu_init.c | 89 +++++++ cpu/mcf52x2/interrupts.c | 8 +- cpu/mcf52x2/speed.c | 13 +- cpu/mcf52x2/start.S | 33 ++- include/asm-m68k/immap.h | 29 +++ include/asm-m68k/immap_520x.h | 212 +++++++++++++++ include/asm-m68k/m520x.h | 358 ++++++++++++++++++++++++++ include/configs/M5208EVBE.h | 223 ++++++++++++++++ 16 files changed, 1330 insertions(+), 14 deletions(-) create mode 100644 board/freescale/m5208evbe/Makefile create mode 100644 board/freescale/m5208evbe/config.mk create mode 100644 board/freescale/m5208evbe/m5208evbe.c create mode 100644 board/freescale/m5208evbe/u-boot.lds create mode 100644 include/asm-m68k/immap_520x.h create mode 100644 include/asm-m68k/m520x.h create mode 100644 include/configs/M5208EVBE.h diff --git a/MAKEALL b/MAKEALL index 020ff73625..5576c8dfa1 100755 --- a/MAKEALL +++ b/MAKEALL @@ -769,6 +769,7 @@ LIST_coldfire=" \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ idmr \ + M5208EVBE \ M52277EVB \ M5235EVB \ M5249EVB \ diff --git a/Makefile b/Makefile index 03148445cc..ecf7e6d0a5 100644 --- a/Makefile +++ b/Makefile @@ -2004,6 +2004,9 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +M5208EVBE_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale + M52277EVB_config \ M52277EVB_spansion_config \ M52277EVB_stmicro_config : unconfig diff --git a/board/freescale/m5208evbe/Makefile b/board/freescale/m5208evbe/Makefile new file mode 100644 index 0000000000..981763d205 --- /dev/null +++ b/board/freescale/m5208evbe/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/m5208evbe/config.mk b/board/freescale/m5208evbe/config.mk new file mode 100644 index 0000000000..ce014edca8 --- /dev/null +++ b/board/freescale/m5208evbe/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0 diff --git a/board/freescale/m5208evbe/m5208evbe.c b/board/freescale/m5208evbe/m5208evbe.c new file mode 100644 index 0000000000..5f99e2f244 --- /dev/null +++ b/board/freescale/m5208evbe/m5208evbe.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + puts("Board: "); + puts("Freescale M5208EVBe\n"); + return 0; +}; + +phys_size_t initdram(int board_type) +{ + volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + u32 dramsize, i; + + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + i--; + + sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); +#ifdef CONFIG_SYS_SDRAM_BASE1 + sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i); +#endif + sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; + sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + + udelay(500); + + /* Issue PALL */ + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + /* Perform two refresh cycles */ + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + asm("nop"); + + /* Issue LEMR */ + sdram->mode = CONFIG_SYS_SDRAM_MODE; + asm("nop"); + sdram->mode = CONFIG_SYS_SDRAM_EMOD; + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + asm("nop"); + + sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + asm("nop"); + + udelay(100); + + return dramsize; +}; + +int testdram(void) +{ + /* TODO: XXX XXX XXX */ + printf("DRAM test not implemented!\n"); + + return (0); +} diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds new file mode 100644 index 0000000000..bc9d5cd0d6 --- /dev/null +++ b/board/freescale/m5208evbe/u-boot.lds @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf52x2/start.o (.text) + cpu/mcf52x2/libmcf52x2.a (.text) + lib_m68k/libm68k.a (.text) + common/dlmalloc.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mcf52x2/config.mk b/cpu/mcf52x2/config.mk index 829273617b..52751be3e4 100644 --- a/cpu/mcf52x2/config.mk +++ b/cpu/mcf52x2/config.mk @@ -26,6 +26,7 @@ PLATFORM_RELFLAGS += -ffixed-d7 -msep-data cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5208:=$(shell grep CONFIG_M5208 $(TOPDIR)/include/$(cfg)) is5249:=$(shell grep CONFIG_M5249 $(TOPDIR)/include/$(cfg)) is5253:=$(shell grep CONFIG_M5253 $(TOPDIR)/include/$(cfg)) is5271:=$(shell grep CONFIG_M5271 $(TOPDIR)/include/$(cfg)) @@ -36,6 +37,9 @@ is5282:=$(shell grep CONFIG_M5282 $(TOPDIR)/include/$(cfg)) ifneq ($(findstring 4.1,$(shell $(CC) --version)),4.1) +ifneq (,$(findstring CONFIG_M5208,$(is5208))) +PLATFORM_CPPFLAGS += -mcpu=5208 +endif ifneq (,$(findstring CONFIG_M5249,$(is5249))) PLATFORM_CPPFLAGS += -mcpu=5249 endif diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 32d6c40da0..2cfe6311d0 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -34,6 +34,72 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_M5208 +int do_reset(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM); + + udelay(1000); + + rcm->rcr = RCM_RCR_SOFTRST; + + /* we don't return! */ + return 0; +}; + +int checkcpu(void) +{ + char buf1[32], buf2[32]; + + printf("CPU: Freescale Coldfire MCF5208\n" + " CPU CLK %s MHz BUS CLK %s MHz\n", + strmhz(buf1, gd->cpu_clk), + strmhz(buf2, gd->bus_clk)); + return 0; +}; + +#if defined(CONFIG_WATCHDOG) +/* Called by macro WATCHDOG_RESET */ +void watchdog_reset(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + wdt->sr = 0x5555; + wdt->sr = 0xAAAA; +} + +int watchdog_disable(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->sr = 0x5555; /* reset watchdog counteDECLARE_GLOBAL_DATA_PTR; +r */ + wdt->sr = 0xAAAA; + wdt->cr = 0; /* disable watchdog timer */ + + puts("WATCHDOG:disabled\n"); + return (0); +} + +int watchdog_init(void) +{ + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + + wdt->cr = 0; /* disable watchdog */ + + /* set timeout and enable watchdog */ + wdt->mr = + ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1; + wdt->sr = 0x5555; /* reset watchdog counter */ + wdt->sr = 0xAAAA; + + puts("WATCHDOG:enabled\n"); + return (0); +} +#endif /* #ifdef CONFIG_WATCHDOG */ +#endif /* #ifdef CONFIG_M5208 */ + #ifdef CONFIG_M5271 /* * Both MCF5270 and MCF5271 are members of the MPC5271 family. Try to diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 11f70b0dbf..7cea6558fd 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -101,6 +101,95 @@ void init_fbcs(void) } #endif +#if defined(CONFIG_M5208) +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + +#ifndef CONFIG_WATCHDOG + volatile wdog_t *wdg = (wdog_t *) MMAP_WDOG; + + /* Disable the watchdog if we aren't using it */ + wdg->cr = 0; +#endif + + scm1->mpr = 0x77777777; + scm1->pacra = 0; + scm1->pacrb = 0; + scm1->pacrc = 0; + scm1->pacrd = 0; + scm1->pacre = 0; + scm1->pacrf = 0; + + /* FlexBus Chipselect */ + init_fbcs(); + + icache_enable(); +} + +/* initialize higher level parts of CPU like timers */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CONFIG_SYS_UART_PORT) { + case 0: + gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + break; + case 1: + gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD); + break; + case 2: +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_timer &= + (GPIO_PAR_TMR_TIN0_MASK | GPIO_PAR_TMR_TIN1_MASK); + gpio->par_timer |= + (GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD); +#endif +#ifdef CONFIG_SYS_UART2_ALT1_GPIO + gpio->par_feci2c &= + (GPIO_PAR_FECI2C_MDC_MASK | GPIO_PAR_FECI2C_MDIO_MASK); + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD); +#endif +#ifdef CONFIG_SYS_UART2_ALT1_GPIO + gpio->par_feci2c &= + (GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + gpio->par_feci2c |= + (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); +#endif + break; + } +} + +#if defined(CONFIG_CMD_NET) +int fecpin_setclear(struct eth_device *dev, int setclear) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + if (setclear) { + gpio->par_fec |= + GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC; + gpio->par_feci2c |= + GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO; + } else { + gpio->par_fec &= + (GPIO_PAR_FEC_7W_MASK & GPIO_PAR_FEC_MII_MASK); + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_MASK; + } + return 0; +} +#endif /* CONFIG_CMD_NET */ +#endif /* CONFIG_M5208 */ + #if defined(CONFIG_M5253) /* * Breath some life into the CPU... diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index 0181e4b416..dff8c6aa88 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -59,13 +59,19 @@ void dtimer_intr_setup(void) #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5272 */ -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275) +#if defined(CONFIG_M5208) || defined(CONFIG_M5282) || \ + defined(CONFIG_M5271) || defined(CONFIG_M5275) int interrupt_init(void) { volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); /* Make sure all interrupts are disabled */ +#if defined(CONFIG_M5208) + intp->imrl0 = 0xFFFFFFFF; + intp->imrh0 = 0xFFFFFFFF; +#else intp->imrl0 |= 0x1; +#endif enable_interrupts(); return 0; diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index c93a5180eb..b485e1cccc 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -30,11 +30,16 @@ DECLARE_GLOBAL_DATA_PTR; -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ +/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks (void) { +#if defined(CONFIG_M5208) + volatile pll_t *pll = (pll_t *) MMAP_PLL; + + pll->odr = CONFIG_SYS_PLL_ODR; + pll->fdr = CONFIG_SYS_PLL_FDR; +#endif + #if defined(CONFIG_M5249) || defined(CONFIG_M5253) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; @@ -77,7 +82,7 @@ int get_clocks (void) #endif gd->cpu_clk = CONFIG_SYS_CLK; -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || \ +#if defined(CONFIG_M5208) || defined(CONFIG_M5249) || defined(CONFIG_M5253) || \ defined(CONFIG_M5271) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; #else diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index ba6b8843e4..0dd4de5160 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -120,6 +120,12 @@ _start: nop move.w #0x2700,%sr +#if defined(CONFIG_M5208) + /* Initialize RAMBAR: locate SRAM and validate it */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 +#endif + #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) move.l #(CONFIG_SYS_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -195,15 +201,6 @@ _after_flashbar_copy: movec %d0, %RAMBAR1 #endif -#if 0 - /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 -#endif - /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- @@ -340,6 +337,24 @@ _int_handler: /*------------------------------------------------------------------------------*/ /* cache functions */ +#ifdef CONFIG_M5208 + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + + move.l #0x80000200, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts +#endif + #ifdef CONFIG_M5271 .globl icache_enable icache_enable: diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h index 6a3ef03288..e83ce08d57 100644 --- a/include/asm-m68k/immap.h +++ b/include/asm-m68k/immap.h @@ -26,6 +26,35 @@ #ifndef __IMMAP_H #define __IMMAP_H +#if defined(CONFIG_MCF520x) +#include +#include + +#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0) +#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1) +#define CONFIG_SYS_TMRPND_REG (((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0) +#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1) +#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33) +#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK) +#define CONFIG_SYS_TMRINTR_PRI (6) +#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0) +#define CONFIG_SYS_PIT_BASE (MMAP_PIT1) +#define CONFIG_SYS_PIT_PRESCALE (6) +#endif + +#define CONFIG_SYS_INTR_BASE (MMAP_INTC0) +#define CONFIG_SYS_NUM_IRQS (128) +#endif /* CONFIG_M520x */ + #ifdef CONFIG_M52277 #include #include diff --git a/include/asm-m68k/immap_520x.h b/include/asm-m68k/immap_520x.h new file mode 100644 index 0000000000..08bc1090ce --- /dev/null +++ b/include/asm-m68k/immap_520x.h @@ -0,0 +1,212 @@ +/* + * MCF520x Internal Memory Map + * + * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_520X__ +#define __IMMAP_520X__ + +#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000) +#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000) +#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000) +#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00030000) +#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040000) +#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000) +#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000) +#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00054000) +#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000) +#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x0005C000) +#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000) +#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000) +#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000) +#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000) +#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000) +#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000) +#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000) +#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000) +#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000) +#define MMAP_EPORT0 (CONFIG_SYS_MBAR + 0x00088000) +#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x0008C000) +#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00090000) +#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000) +#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004) +#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000) +#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000A8000) + +#include +#include +#include +#include +#include +#include + +/* System Controller Module */ +typedef struct scm1 { + u32 mpr; /* 0x00 Master Privilege */ + u32 rsvd1[7]; + u32 pacra; /* 0x20 Peripheral Access Ctrl A */ + u32 pacrb; /* 0x24 Peripheral Access Ctrl B */ + u32 pacrc; /* 0x28 Peripheral Access Ctrl C */ + u32 pacrd; /* 0x2C Peripheral Access Ctrl D */ + u32 rsvd2[4]; + u32 pacre; /* 0x40 Peripheral Access Ctrl E */ + u32 pacrf; /* 0x44 Peripheral Access Ctrl F */ + u32 rsvd3[3]; + u32 bmt; /* 0x50 bus monitor */ +} scm1_t; + +typedef struct scm2 { + u8 rsvd1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 */ + u16 rsvd2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 */ + u8 rsvd3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B */ + u8 rsvd4[3]; /* 0x1C - 0x1E */ + u8 scmisr; /* 0x1F */ + u8 rsvd5[79]; /* 0x20 - 0x6F */ + u32 cfadr; /* 0x70 */ + u8 rsvd7; /* 0x74 */ + u8 cfier; /* 0x75 */ + u8 cfloc; /* 0x76 */ + u8 cfatr; /* 0x77 */ + u32 rsvd8; /* 0x78 - 0x7B */ + u32 cfdtr; /* 0x7C */ +} scm2_t; + +/* Chip configuration module */ +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +typedef struct ccm_ctrl { + u16 ccr; /* 0x00 Chip Cfg */ + u16 res1; /* 0x02 */ + u16 rcon; /* 0x04 Reset Cfg */ + u16 cir; /* 0x06 Chip ID */ +} ccm_t; + +/* GPIO port */ +typedef struct gpio_ctrl { + /* Port Output Data */ + u8 podr_busctl; /* 0x00 */ + u8 podr_be; /* 0x01 */ + u8 podr_cs; /* 0x02 */ + u8 podr_feci2c; /* 0x03 */ + u8 podr_qspi; /* 0x04 */ + u8 podr_timer; /* 0x05 */ + u8 podr_uart; /* 0x06 */ + u8 podr_fech; /* 0x07 */ + u8 podr_fecl; /* 0x08 */ + u8 res01[3]; /* 0x9 - 0x0B */ + + /* Port Data Direction */ + u8 pddr_busctl; /* 0x0C */ + u8 pddr_be; /* 0x0D */ + u8 pddr_cs; /* 0x0E */ + u8 pddr_feci2c; /* 0x0F */ + u8 pddr_qspi; /* 0x10*/ + u8 pddr_timer; /* 0x11 */ + u8 pddr_uart; /* 0x12 */ + u8 pddr_fech; /* 0x13 */ + u8 pddr_fecl; /* 0x14 */ + u8 res02[5]; /* 0x15 - 0x19 */ + + /* Port Data Direction */ + u8 ppdr_cs; /* 0x1A */ + u8 ppdr_feci2c; /* 0x1B */ + u8 ppdr_qspi; /* 0x1C */ + u8 ppdr_timer; /* 0x1D */ + u8 ppdr_uart; /* 0x1E */ + u8 ppdr_fech; /* 0x1F */ + u8 ppdr_fecl; /* 0x20 */ + u8 res03[3]; /* 0x21 - 0x23 */ + + /* Port Clear Output Data */ + u8 pclrr_busctl; /* 0x24 */ + u8 pclrr_be; /* 0x25 */ + u8 pclrr_cs; /* 0x26 */ + u8 pclrr_feci2c; /* 0x27 */ + u8 pclrr_qspi; /* 0x28 */ + u8 pclrr_timer; /* 0x29 */ + u8 pclrr_uart; /* 0x2A */ + u8 pclrr_fech; /* 0x2B */ + u8 pclrr_fecl; /* 0x2C */ + u8 res04[3]; /* 0x2D - 0x2F */ + + /* Pin Assignment */ + u8 par_busctl; /* 0x30 */ + u8 par_be; /* 0x31 */ + u8 par_cs; /* 0x32 */ + u8 par_feci2c; /* 0x33 */ + u8 par_qspi; /* 0x34 */ + u8 par_timer; /* 0x35 */ + u16 par_uart; /* 0x36 */ + u8 par_fec; /* 0x38 */ + u8 par_irq; /* 0x39 */ + + /* Mode Select Control */ + /* Drive Strength Control */ + u8 mscr_fb; /* 0x3A */ + u8 mscr_sdram; /* 0x3B */ + + u8 dscr_i2c; /* 0x3C */ + u8 dscr_misc; /* 0x3D */ + u8 dscr_fec; /* 0x3E */ + u8 dscr_uart; /* 0x3F */ + u8 dscr_qspi; /* 0x40 */ +} gpio_t; + +/* SDRAM controller */ +typedef struct sdram_ctrl { + u32 mode; /* 0x00 Mode/Extended Mode */ + u32 ctrl; /* 0x04 Ctrl */ + u32 cfg1; /* 0x08 Cfg 1 */ + u32 cfg2; /* 0x0C Cfg 2 */ + u32 res1[64]; /* 0x10 - 0x10F */ + u32 cs0; /* 0x110 Chip Select 0 Cfg */ + u32 cs1; /* 0x114 Chip Select 1 Cfg */ +} sdram_t; + +/* Clock Module */ +typedef struct pll_ctrl { + u8 odr; /* 0x00 Output divider */ + u8 rsvd1; + u8 cr; /* 0x02 Control */ + u8 rsvd2; + u8 mdr; /* 0x04 Modulation Divider */ + u8 rsvd3; + u8 fdr; /* 0x06 Feedback Divider */ + u8 rsvd4; +} pll_t; + +/* Watchdog registers */ +typedef struct wdog_ctrl { + u16 cr; /* 0x00 Control */ + u16 mr; /* 0x02 Modulus */ + u16 cntr; /* 0x04 Count */ + u16 sr; /* 0x06 Service */ +} wdog_t; + +#endif /* __IMMAP_520X__ */ diff --git a/include/asm-m68k/m520x.h b/include/asm-m68k/m520x.h new file mode 100644 index 0000000000..267bfd994a --- /dev/null +++ b/include/asm-m68k/m520x.h @@ -0,0 +1,358 @@ +/* + * m520x.h -- Definitions for Freescale Coldfire 520x + * + * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __M520X__ +#define __M520X__ + +/* *** System Control Module (SCM) *** */ +#define SCM_MPR_MPROT0(x) (((x) & 0x0F) << 28) +#define SCM_MPR_MPROT1(x) (((x) & 0x0F) << 24) +#define SCM_MPR_MPROT2(x) (((x) & 0x0F) << 20) +#define MPROT_MTR 4 +#define MPROT_MTW 2 +#define MPROT_MPL 1 + +#define SCM_PACRA_PACR0(x) (((x) & 0x0F) << 28) +#define SCM_PACRA_PACR1(x) (((x) & 0x0F) << 24) +#define SCM_PACRA_PACR2(x) (((x) & 0x0F) << 20) + +#define SCM_PACRB_PACR12(x) (((x) & 0x0F) << 12) + +#define SCM_PACRC_PACR16(x) (((x) & 0x0F) << 28) +#define SCM_PACRC_PACR17(x) (((x) & 0x0F) << 24) +#define SCM_PACRC_PACR18(x) (((x) & 0x0F) << 20) +#define SCM_PACRC_PACR21(x) (((x) & 0x0F) << 8) +#define SCM_PACRC_PACR22(x) (((x) & 0x0F) << 4) +#define SCM_PACRC_PACR23(x) ((x) & 0x0F) + +#define SCM_PACRD_PACR24(x) (((x) & 0x0F) << 28) +#define SCM_PACRD_PACR25(x) (((x) & 0x0F) << 24) +#define SCM_PACRD_PACR26(x) (((x) & 0x0F) << 20) +#define SCM_PACRD_PACR28(x) (((x) & 0x0F) << 12) +#define SCM_PACRD_PACR29(x) (((x) & 0x0F) << 8) +#define SCM_PACRD_PACR30(x) (((x) & 0x0F) << 4) +#define SCM_PACRD_PACR31(x) ((x) & 0x0F) + +#define SCM_PACRE_PACR32(x) (((x) & 0x0F) << 28) +#define SCM_PACRE_PACR33(x) (((x) & 0x0F) << 24) +#define SCM_PACRE_PACR34(x) (((x) & 0x0F) << 20) +#define SCM_PACRE_PACR35(x) (((x) & 0x0F) << 16) +#define SCM_PACRE_PACR36(x) (((x) & 0x0F) << 12) + +#define SCM_PACRF_PACR40(x) (((x) & 0x0F) << 28) +#define SCM_PACRF_PACR41(x) (((x) & 0x0F) << 24) +#define SCM_PACRF_PACR42(x) (((x) & 0x0F) << 20) + +#define PACR_SP 4 +#define PACR_WP 2 +#define PACR_TP 1 + +#define SCM_BMT_BME (0x00000008) +#define SCM_BMT_BMT_MASK (0x07) +#define SCM_BMT_BMT(x) ((x) & 0x07) +#define SCM_BMT_BMT1024 (0x0000) +#define SCM_BMT_BMT512 (0x0001) +#define SCM_BMT_BMT256 (0x0002) +#define SCM_BMT_BMT128 (0x0003) +#define SCM_BMT_BMT64 (0x0004) +#define SCM_BMT_BMT32 (0x0005) +#define SCM_BMT_BMT16 (0x0006) +#define SCM_BMT_BMT8 (0x0007) + +#define SCM_CWCR_RO (0x8000) +#define SCM_CWCR_CWR_WH (0x0100) +#define SCM_CWCR_CWE (0x0080) +#define SCM_CWRI_WINDOW (0x0060) +#define SCM_CWRI_RESET (0x0040) +#define SCM_CWRI_INT_RESET (0x0020) +#define SCM_CWRI_INT (0x0000) +#define SCM_CWCR_CWT(x) (((x) & 0x001F)) + +#define SCM_ISR_CFEI (0x02) +#define SCM_ISR_CWIC (0x01) + +#define SCM_CFIER_ECFEI (0x01) + +#define SCM_CFLOC_LOC (0x80) + +#define SCM_CFATR_WRITE (0x80) +#define SCM_CFATR_SZ32 (0x20) +#define SCM_CFATR_SZ16 (0x10) +#define SCM_CFATR_SZ08 (0x00) +#define SCM_CFATR_CACHE (0x08) +#define SCM_CFATR_MODE (0x02) +#define SCM_CFATR_TYPE (0x01) + +/* *** Interrupt Controller (INTC) *** */ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT_F1 (1) +#define INT0_LO_EPORT_F4 (2) +#define INT0_LO_EPORT_F7 (3) +#define INT1_LO_PIT0 (4) +#define INT1_LO_PIT1 (5) +/* 6 - 7 rsvd */ +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM_CWIC (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +/* 29 rsvd */ +#define INT0_LO_I2C (30) +#define INT0_LO_QSPI (31) + +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_FEC0_TXF (36) +#define INT0_HI_FEC0_TXB (37) +#define INT0_HI_FEC0_UN (38) +#define INT0_HI_FEC0_RL (39) +#define INT0_HI_FEC0_RXF (40) +#define INT0_HI_FEC0_RXB (41) +#define INT0_HI_FEC0_MII (42) +#define INT0_HI_FEC0_LC (43) +#define INT0_HI_FEC0_HBERR (44) +#define INT0_HI_FEC0_GRA (45) +#define INT0_HI_FEC0_EBERR (46) +#define INT0_HI_FEC0_BABT (47) +#define INT0_HI_FEC0_BABR (48) +/* 49 - 61 rsvd */ +#define INT0_HI_SCMISR_CFEI (62) + +/* *** Reset Controller Module (RCM) *** */ +#define RCM_RCR_SOFTRST (0x80) +#define RCM_RCR_FRCRSTOUT (0x40) + +#define RCM_RSR_SOFT (0x20) +#define RCM_RSR_WDOG (0x10) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_LOL (0x01) + +/* *** Chip Configuration Module (CCM) *** */ +#define CCM_CCR_CSC (0x0200) +#define CCM_CCR_OSCFREQ (0x0080) +#define CCM_CCR_LIMP (0x0040) +#define CCM_CCR_LOAD (0x0020) +#define CCM_CCR_BOOTPS(x) (((x) & 0x0003) << 3) +#define CCM_CCR_OSC_MODE (0x0004) +#define CCM_CCR_PLL_MODE (0x0002) +#define CCM_CCR_RESERVED (0x0001) + +#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) + +/* *** General Purpose I/O (GPIO) *** */ +#define GPIO_PDR_BUSCTL(x) ((x) & 0x0F) +#define GPIO_PDR_BE(x) ((x) & 0x0F) +#define GPIO_PDR_CS(x) (((x) & 0x07) << 1) +#define GPIO_PDR_FECI2C(x) ((x) & 0x0F) +#define GPIO_PDR_QSPI(x) ((x) & 0x0F) +#define GPIO_PDR_TIMER(x) ((x) & 0x0F) +#define GPIO_PDR_UART(x) ((x) & 0xFF) +#define GPIO_PDR_FECH(x) ((x) & 0xFF) +#define GPIO_PDR_FECL(x) ((x) & 0xFF) + +#define GPIO_PAR_FBCTL_OE (0x10) +#define GPIO_PAR_FBCTL_TA (0x08) +#define GPIO_PAR_FBCTL_RWB (0x04) +#define GPIO_PAR_FBCTL_TS_MASK (0xFC) +#define GPIO_PAR_FBCTL_TS_TS (0x03) +#define GPIO_PAR_FBCTL_TS_DMA (0x02) + +#define GPIO_PAR_BE3 (0x08) +#define GPIO_PAR_BE2 (0x04) +#define GPIO_PAR_BE1 (0x02) +#define GPIO_PAR_BE0 (0x01) + +#define GPIO_PAR_CS3 (0x08) +#define GPIO_PAR_CS2 (0x04) +#define GPIO_PAR_CS1_MASK (0xFC) +#define GPIO_PAR_CS1_CS1 (0x03) +#define GPIO_PAR_CS1_SDCS1 (0x02) + +#define GPIO_PAR_FECI2C_RMII_MASK (0x0F) +#define GPIO_PAR_FECI2C_MDC_MASK (0x3F) +#define GPIO_PAR_FECI2C_MDC_MDC (0xC0) +#define GPIO_PAR_FECI2C_MDC_SCL (0x80) +#define GPIO_PAR_FECI2C_MDC_U2TXD (0x40) +#define GPIO_PAR_FECI2C_MDIO_MASK (0xCF) +#define GPIO_PAR_FECI2C_MDIO_MDIO (0x30) +#define GPIO_PAR_FECI2C_MDIO_SDA (0x20) +#define GPIO_PAR_FECI2C_MDIO_U2RXD (0x10) +#define GPIO_PAR_FECI2C_I2C_MASK (0xF0) +#define GPIO_PAR_FECI2C_SCL_MASK (0xF3) +#define GPIO_PAR_FECI2C_SCL_SCL (0x0C) +#define GPIO_PAR_FECI2C_SCL_U2RXD (0x04) +#define GPIO_PAR_FECI2C_SDA_MASK (0xFC) +#define GPIO_PAR_FECI2C_SDA_SDA (0x03) +#define GPIO_PAR_FECI2C_SDA_U2TXD (0x01) + +#define GPIO_PAR_QSPI_PCS2_MASK (0x3F) +#define GPIO_PAR_QSPI_PCS2_PCS2 (0xC0) +#define GPIO_PAR_QSPI_PCS2_DACK0 (0x80) +#define GPIO_PAR_QSPI_PCS2_U2RTS (0x40) +#define GPIO_PAR_QSPI_DIN_MASK (0xCF) +#define GPIO_PAR_QSPI_DIN_DIN (0x30) +#define GPIO_PAR_QSPI_DIN_DREQ0 (0x20) +#define GPIO_PAR_QSPI_DIN_U2CTS (0x10) +#define GPIO_PAR_QSPI_DOUT_MASK (0xF3) +#define GPIO_PAR_QSPI_DOUT_DOUT (0x0C) +#define GPIO_PAR_QSPI_DOUT_SDA (0x08) +#define GPIO_PAR_QSPI_SCK_MASK (0xFC) +#define GPIO_PAR_QSPI_SCK_SCK (0x03) +#define GPIO_PAR_QSPI_SCK_SCL (0x02) + +#define GPIO_PAR_TMR_TIN3(x) (((x) & 0x03) << 6) +#define GPIO_PAR_TMR_TIN2(x) (((x) & 0x03) << 4) +#define GPIO_PAR_TMR_TIN1(x) (((x) & 0x03) << 2) +#define GPIO_PAR_TMR_TIN0(x) ((x) & 0x03) +#define GPIO_PAR_TMR_TIN3_MASK (0x3F) +#define GPIO_PAR_TMR_TIN3_TIN3 (0xC0) +#define GPIO_PAR_TMR_TIN3_TOUT3 (0x80) +#define GPIO_PAR_TMR_TIN3_U2CTS (0x40) +#define GPIO_PAR_TMR_TIN2_MASK (0xCF) +#define GPIO_PAR_TMR_TIN2_TIN2 (0x30) +#define GPIO_PAR_TMR_TIN2_TOUT2 (0x20) +#define GPIO_PAR_TMR_TIN2_U2RTS (0x10) +#define GPIO_PAR_TMR_TIN1_MASK (0xF3) +#define GPIO_PAR_TMR_TIN1_TIN1 (0x0C) +#define GPIO_PAR_TMR_TIN1_TOUT1 (0x08) +#define GPIO_PAR_TMR_TIN1_U2RXD (0x04) +#define GPIO_PAR_TMR_TIN0_MASK (0xFC) +#define GPIO_PAR_TMR_TIN0_TIN0 (0x03) +#define GPIO_PAR_TMR_TIN0_TOUT0 (0x02) +#define GPIO_PAR_TMR_TIN0_U2TXD (0x01) + +#define GPIO_PAR_UART1_MASK (0xF03F) +#define GPIO_PAR_UART0_MASK (0xFFC0) +#define GPIO_PAR_UART_U1CTS_MASK (0xF3FF) +#define GPIO_PAR_UART_U1CTS_U1CTS (0x0C00) +#define GPIO_PAR_UART_U1CTS_TIN1 (0x0800) +#define GPIO_PAR_UART_U1CTS_PCS1 (0x0400) +#define GPIO_PAR_UART_U1RTS_MASK (0xFCFF) +#define GPIO_PAR_UART_U1RTS_U1RTS (0x0300) +#define GPIO_PAR_UART_U1RTS_TOUT1 (0x0200) +#define GPIO_PAR_UART_U1RTS_PCS1 (0x0100) +#define GPIO_PAR_UART_U1TXD (0x0080) +#define GPIO_PAR_UART_U1RXD (0x0040) +#define GPIO_PAR_UART_U0CTS_MASK (0xFFCF) +#define GPIO_PAR_UART_U0CTS_U0CTS (0x0030) +#define GPIO_PAR_UART_U0CTS_TIN0 (0x0020) +#define GPIO_PAR_UART_U0CTS_PCS0 (0x0010) +#define GPIO_PAR_UART_U0RTS_MASK (0xFFF3) +#define GPIO_PAR_UART_U0RTS_U0RTS (0x000C) +#define GPIO_PAR_UART_U0RTS_TOUT0 (0x0008) +#define GPIO_PAR_UART_U0RTS_PCS0 (0x0004) +#define GPIO_PAR_UART_U0TXD (0x0002) +#define GPIO_PAR_UART_U0RXD (0x0001) + +#define GPIO_PAR_FEC_7W_MASK (0xF3) +#define GPIO_PAR_FEC_7W_FEC (0x0C) +#define GPIO_PAR_FEC_7W_U1RTS (0x04) +#define GPIO_PAR_FEC_MII_MASK (0xFC) +#define GPIO_PAR_FEC_MII_FEC (0x03) +#define GPIO_PAR_FEC_MII_UnCTS (0x01) + +#define GPIO_PAR_IRQ_IRQ4 (0x01) + +#define GPIO_MSCR_FB_FBCLK(x) (((x) & 0x03) << 6) +#define GPIO_MSCR_FB_DUP(x) (((x) & 0x03) << 4) +#define GPIO_MSCR_FB_DLO(x) (((x) & 0x03) << 2) +#define GPIO_MSCR_FB_ADRCTL(x) ((x) & 0x03) +#define GPIO_MSCR_FB_FBCLK_MASK (0x3F) +#define GPIO_MSCR_FB_DUP_MASK (0xCF) +#define GPIO_MSCR_FB_DLO_MASK (0xF3) +#define GPIO_MSCR_FB_ADRCTL_MASK (0xFC) + +#define GPIO_MSCR_SDR_SDCLKB(x) (((x) & 0x03) << 4) +#define GPIO_MSCR_SDR_SDCLK(x) (((x) & 0x03) << 2) +#define GPIO_MSCR_SDR_SDRAM(x) ((x) & 0x03) +#define GPIO_MSCR_SDR_SDCLKB_MASK (0xCF) +#define GPIO_MSCR_SDR_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDR_SDRAM_MASK (0xFC) + +#define MSCR_25VDDR (0x03) +#define MSCR_18VDDR_FULL (0x02) +#define MSCR_OPENDRAIN (0x01) +#define MSCR_18VDDR_HALF (0x00) + +#define GPIO_DSCR_I2C(x) ((x) & 0x03) +#define GPIO_DSCR_I2C_MASK (0xFC) + +#define GPIO_DSCR_MISC_DBG(x) (((x) & 0x03) << 4) +#define GPIO_DSCR_MISC_DBG_MASK (0xCF) +#define GPIO_DSCR_MISC_RSTOUT(x) (((x) & 0x03) << 2) +#define GPIO_DSCR_MISC_RSTOUT_MASK (0xF3) +#define GPIO_DSCR_MISC_TIMER(x) ((x) & 0x03) +#define GPIO_DSCR_MISC_TIMER_MASK (0xFC) + +#define GPIO_DSCR_FEC(x) ((x) & 0x03) +#define GPIO_DSCR_FEC_MASK (0xFC) + +#define GPIO_DSCR_UART_UART1(x) (((x) & 0x03) << 4) +#define GPIO_DSCR_UART_UART1_MASK (0xCF) +#define GPIO_DSCR_UART_UART0(x) (((x) & 0x03) << 2) +#define GPIO_DSCR_UART_UART0_MASK (0xF3) +#define GPIO_DSCR_UART_IRQ(x) ((x) & 0x03) +#define GPIO_DSCR_UART_IRQ_MASK (0xFC) + +#define GPIO_DSCR_QSPI(x) ((x) & 0x03) +#define GPIO_DSCR_QSPI_MASK (0xFC) + +#define DSCR_50PF (0x03) +#define DSCR_30PF (0x02) +#define DSCR_20PF (0x01) +#define DSCR_10PF (0x00) + +/* *** Phase Locked Loop (PLL) *** */ +#define PLL_PODR_CPUDIV(x) (((x) & 0x0F) << 4) +#define PLL_PODR_CPUDIV_MASK (0x0F) +#define PLL_PODR_BUSDIV(x) ((x) & 0x0F) +#define PLL_PODR_BUSDIV_MASK (0xF0) + +#define PLL_PCR_DITHEN (0x80) +#define PLL_PCR_DITHDEV(x) ((x) & 0x07) +#define PLL_PCR_DITHDEV_MASK (0xF8) + +#endif /* __M520X__ */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h new file mode 100644 index 0000000000..32123d2f54 --- /dev/null +++ b/include/configs/M5208EVBE.h @@ -0,0 +1,223 @@ +/* + * Configuation settings for the Freescale MCF5208EVBe. + * + * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _M5208EVBE_H +#define _M5208EVBE_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF520x /* define processor family */ +#define CONFIG_M5208 /* define processor type */ + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 + +/* Command line configuration */ +#include + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1 +# define CONFIG_SYS_DISCOVER_PHY +# define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_HAS_ETH1 + +# define CONFIG_SYS_FEC0_PINMUX 0 +# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CONFIG_SYS_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5208EVBe +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 3ffff;" \ + "era 0 3ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ +#define CONFIG_SYS_LOAD_ADDR 0x40010000 + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ +#define CONFIG_SYS_PLL_ODR 0x36 +#define CONFIG_SYS_PLL_FDR 0x7D + +#define CONFIG_SYS_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/* Definitions for initial stack pointer and data area (in DPRAM) */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_CFG1 0x43711630 +#define CONFIG_SYS_SDRAM_CFG2 0x56670000 +#define CONFIG_SYS_SDRAM_CTRL 0xE1002000 +#define CONFIG_SYS_SDRAM_EMOD 0x80010000 +#define CONFIG_SYS_SDRAM_MODE 0x00CD0000 + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) + +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) + +/* FLASH organization */ +#define CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI +# define CONFIG_FLASH_CFI_DRIVER 1 +# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CONFIG_SYS_MAX_FLASH_SECT 254 /* max number of sectors on one chip */ +# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE + +/* + * Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_IS_IN_FLASH 1 + +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +/* Chipselect bank definitions */ +/* + * CS0 - NOR Flash + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CONFIG_SYS_CS0_BASE 0 +#define CONFIG_SYS_CS0_MASK 0x007F0001 +#define CONFIG_SYS_CS0_CTRL 0x00001FA0 + +#endif /* _M5208EVBE_H */ -- 2.39.5