From c0a1dfdec293576b5727d7568bf423e60042f878 Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Thu, 1 Oct 2009 17:20:40 +0900 Subject: [PATCH] s5pc1xx: add support SMDKC100 board Adds new board SMDKC100 that uses s5pc100 SoC Signed-off-by: Minkyu Kang Signed-off-by: HeungJun, Kim --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/samsung/smdkc100/Makefile | 55 ++++++ board/samsung/smdkc100/config.mk | 16 ++ board/samsung/smdkc100/lowlevel_init.S | 215 ++++++++++++++++++++++ board/samsung/smdkc100/mem_setup.S | 197 ++++++++++++++++++++ board/samsung/smdkc100/onenand.c | 83 +++++++++ board/samsung/smdkc100/smdkc100.c | 51 ++++++ doc/README.s5pc1xx | 56 ++++++ include/configs/smdkc100.h | 242 +++++++++++++++++++++++++ 11 files changed, 923 insertions(+) create mode 100644 board/samsung/smdkc100/Makefile create mode 100644 board/samsung/smdkc100/config.mk create mode 100644 board/samsung/smdkc100/lowlevel_init.S create mode 100644 board/samsung/smdkc100/mem_setup.S create mode 100644 board/samsung/smdkc100/onenand.c create mode 100644 board/samsung/smdkc100/smdkc100.c create mode 100644 doc/README.s5pc1xx create mode 100644 include/configs/smdkc100.h diff --git a/MAINTAINERS b/MAINTAINERS index f42c8f0046..778d5da711 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -725,6 +725,10 @@ Alex Z lart SA1100 dnp1110 SA1110 +Minkyu Kang + + SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 8ff6987a2c..8e924d975b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -604,6 +604,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_pandora \ omap3_zoom1 \ omap3_zoom2 \ + smdkc100 \ " ######################################################################### diff --git a/Makefile b/Makefile index 5857b5252d..042d9a50cf 100644 --- a/Makefile +++ b/Makefile @@ -3127,6 +3127,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +smdkc100_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx + ######################################################################### ## XScale Systems ######################################################################### diff --git a/board/samsung/smdkc100/Makefile b/board/samsung/smdkc100/Makefile new file mode 100644 index 0000000000..808d0dd0c6 --- /dev/null +++ b/board/samsung/smdkc100/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := smdkc100.o +COBJS-$(CONFIG_SAMSUNG_ONENAND) += onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk new file mode 100644 index 0000000000..ebab420815 --- /dev/null +++ b/board/samsung/smdkc100/config.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2008 # Samsung Elecgtronics +# Kyungmin Park +# + +# On S5PC100 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x38000000 to 0x40000000 (128MiB) +# +# On S5PC110 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x40000000 to 0x48000000 (128MiB) +# +TEXT_BASE = 0x34800000 diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S new file mode 100644 index 0000000000..32572c51da --- /dev/null +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -0,0 +1,215 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park + * Minkyu Kang + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/* + * Register usages: + * + * r5 has zero always + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r9, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r8, =S5PC100_GPIO_BASE + + /* Disable Watchdog */ + ldr r0, =S5PC100_WATCHDOG_BASE @0xEA200000 + orr r0, r0, #0x0 + str r5, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* setting SRAM */ + ldr r0, =S5PC100_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5PC100 has 3 groups of interrupt sources */ + ldr r0, =S5PC100_VIC0_BASE @0xE4000000 + ldr r1, =S5PC100_VIC1_BASE @0xE4000000 + ldr r2, =S5PC100_VIC2_BASE @0xE4000000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @INTENCLEAR + str r3, [r1, #0x14] @INTENCLEAR + str r3, [r2, #0x14] @INTENCLEAR + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @INTSELECT + str r5, [r1, #0xc] @INTSELECT + str r5, [r2, #0xc] @INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @INTADDRESS + str r5, [r1, #0xf00] @INTADDRESS + str r5, [r2, #0xf00] @INTADDRESS +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init + + /* for TZPC */ + bl tzpc_asm_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + bl mem_ctrl_asm_init + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldr r0, =S5PC100_RST_STAT + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset +#endif + +1: + mov lr, r9 + mov pc, lr + +#ifdef CONFIG_ONENAND_IPL +wakeup_reset: + + /* Clear wakeup status register */ + ldr r0, =S5PC100_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* Load return address and jump to kernel */ + ldr r0, =S5PC100_INFORM0 + + /* r1 = physical address of s5pc100_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep.S) */ + mov pc, r1 + nop + nop +#endif + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r8, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x00011110 + str r1, [r8, #0x304] + ldr r1, =0x1 + str r1, [r8, #0x308] + ldr r1, =0x00011301 + str r1, [r8, #0x300] + + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r8, #0x000] @ APLL_LOCK + str r1, [r8, #0x004] @ MPLL_LOCK + str r1, [r8, #0x008] @ EPLL_LOCK + str r1, [r8, #0x00C] @ HPLL_LOCK + + /* APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1332MHz) + str r1, [r8, #0x100] + /* MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r8, #0x104] + /* EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r8, #0x108] + /* HPLL_CON */ + ldr r1, =0x80600603 + str r1, [r8, #0x10C] + + /* Set Source Clock */ + ldr r1, =0x1111 @ A, M, E, HPLL Muxing + str r1, [r8, #0x200] @ CLK_SRC0 + + ldr r1, =0x1000001 @ Uart Clock & CLK48M Muxing + str r1, [r8, #0x204] @ CLK_SRC1 + + ldr r1, =0x9000 @ ARMCLK/4 + str r1, [r8, #0x400] @ CLK_OUT + + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ GPA0_CON + ldr r1, =0x00022222 + str r1, [r0, #0x20] @ GPA1_CON + + mov pc, lr + +/* + * tzpc_asm_init: Initialize TZPC + */ +tzpc_asm_init: + ldr r0, =0xE3800000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + ldr r0, =0xE2800000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + str r1, [r0, #0x81C] + + ldr r0, =0xE2900000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + mov pc, lr +#endif diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S new file mode 100644 index 0000000000..94a701d428 --- /dev/null +++ b/board/samsung/smdkc100/mem_setup.S @@ -0,0 +1,197 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx + * + * Copyright (C) 2009 Samsung Electrnoics + * Inki Dae + * Heungjun Kim + * Minkyu Kang + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + ldr r6, =S5PC100_DMC_BASE @ 0xE6000000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r6, #0x018] @ PHYCONTROL0 + ldr r1, =0xf4 + str r1, [r6, #0x01C] @ PHYCONTROL1 + ldr r1, =0x0 + str r1, [r6, #0x020] @ PHYCONTROL2 + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* Force value locking for DLL off */ + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL off */ + ldr r1, =0x50101001 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* auto refresh off */ + ldr r1, =0xff001010 + str r1, [r6, #0x000] @ CONCONTROL + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + str r1, [r6, #0x004] @ MEMCONTROL + + /* + * Note: + * If Bank0 has OneDRAM we place it at 0x2800'0000 + * So finally Bank1 should address start at at 0x2000'0000 + */ + mov r4, #0x0 + +swap_memory: + /* + * Bank0 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x30f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + orreq r1, r1, #0x08000000 + str r1, [r6, #0x008] @ MEMCONFIG0 + + /* + * Bank1 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x38f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + biceq r1, r1, #0x08000000 + str r1, [r6, #0x00c] @ MEMCONFIG1 + + ldr r1, =0x20000000 + str r1, [r6, #0x014] @ PRECHCONFIG + + /* + * FIXME: Please verify these values + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + * 7.8us * 20MHz %LE %LONG156(0x9C), + * 7.8us * 10MHz %LE %LONG78(0x4E) + */ + ldr r1, =0x0000050e + str r1, [r6, #0x030] @ TIMINGAREF + + /* 166 MHz */ + ldr r1, =0x0c233287 + str r1, [r6, #0x034] @ TIMINGROW + + /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */ + ldr r1, =0x32330303 + str r1, [r6, #0x038] @ TIMINGDATA + + /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */ + ldr r1, =0x04141433 + str r1, [r6, #0x03C] @ TIMINGPOWER + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip0 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00000032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip1 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00100032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* auto refresh on */ + ldr r1, =0xff002030 + str r1, [r6, #0x000] @ CONCONTROL + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r6, #0x028] @ PWRDNCONFIG + + /* BL%LE %LONG */ + ldr r1, =0xff212100 + str r1, [r6, #0x004] @ MEMCONTROL + + + /* Try to test memory area */ + cmp r4, #0x1 + beq 1f + + mov r4, #0x1 + ldr r1, =0x37ffff00 + str r4, [r1] + str r4, [r1, #0x4] @ dummy write + ldr r0, [r1] + cmp r0, r4 + bne swap_memory + +1: + mov pc, lr + + .ltorg diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c new file mode 100644 index 0000000000..c25869e5c4 --- /dev/null +++ b/board/samsung/smdkc100/onenand.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + struct samsung_onenand *onenand; + int value; + + this->base = (void *)S5PC100_ONENAND_BASE; + onenand = (struct samsung_onenand *)this->base; + + /* D0 Domain memory clock gating */ + value = readl(&clk->gate_d01); + value &= ~(1 << 2); /* CLK_ONENANDC */ + value |= (1 << 2); + writel(value, &clk->gate_d01); + + value = readl(&clk->src0); + value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */ + value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */ + writel(value, &clk->src0); + + value = readl(&clk->div1); + value &= ~(3 << 16); /* PCLKD1_RATIO */ + value |= (1 << 16); + writel(value, &clk->div1); + + writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset); + + while (!(readl(&onenand->int_err_stat) & RST_CMP)) + continue; + + writel(RST_CMP, &onenand->int_err_ack); + + /* + * Access_Clock [2:0] + * 166 MHz, 134 Mhz : 3 + * 100 Mhz, 60 Mhz : 2 + */ + writel(0x3, &onenand->acc_clock); + + writel(INT_ERR_ALL, &onenand->int_err_mask); + writel(1 << 0, &onenand->int_pin_en); /* Enable */ + + value = readl(&onenand->int_err_mask); + value &= ~RDY_ACT; + writel(value, &onenand->int_err_mask); + + s3c_onenand_init(mtd); +} diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c new file mode 100644 index 0000000000..15a1a27c36 --- /dev/null +++ b/board/samsung/smdkc100/smdkc100.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_SMDKC100; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board:\tSMDKC100\n"); + return 0; +} +#endif diff --git a/doc/README.s5pc1xx b/doc/README.s5pc1xx new file mode 100644 index 0000000000..5a0fe33db1 --- /dev/null +++ b/doc/README.s5pc1xx @@ -0,0 +1,56 @@ + +Summary +======= + +This README is about U-Boot support for SAMSUNG's ARM Cortex-A8 based S5PC1xx +family of SoCs (S5PC100 [1] and S5PC110). + +Currently the following board is supported: + +* SMDKC100 [2] + +Toolchain +========= + +While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile +with -march=armv5 to allow more compilers to work. For U-Boot code this has +no performance impact. + +Build +===== + +* SMDKC100 + +make smdkc100_config +make + + +Interfaces +========== + +cpu + +To check SoC: + + if (cpu_is_s5pc100()) + printf("cpu is s5pc100\n"); + + or + + if (cpu_is_s5pc110()) + printf("cpu is s5pc110\n"); + +gpio + not supported yet. + +Links +===== + +[1] S5PC100: + +http://www.samsung.com/global/business/semiconductor/productInfo.do? +fmly_id=229&partnum=S5PC100 + +[2] SMDKC100: + +http://meritech.co.kr/eng/products/product_view.php?num=28 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h new file mode 100644 index 0000000000..8c472aff47 --- /dev/null +++ b/include/configs/smdkc100.h @@ -0,0 +1,242 @@ +/* + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang + * HeungJun Kim + * Inki Dae + * + * Configuation settings for the SAMSUNG SMDKC100 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5PC100 1 /* which is in a S5PC100 */ +#define CONFIG_SMDKC100 1 /* working with SMDKC100 */ + +#include /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_L2_OFF + +/* input clock of PLL: SMDKC100 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ +/* + * select serial console configuration + */ +#define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */ +#define CONFIG_SERIAL_MULTI 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#include + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NET + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define MTDIDS_DEFAULT "onenand0=s3c-onenand" +#define MTDPARTS_DEFAULT "mtdparts=s3c-onenand:256k(bootloader)"\ + ",128k@0x40000(params)"\ + ",3m@0x60000(kernel)"\ + ",16m@0x360000(test)"\ + ",-(UBI)" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#define CONFIG_BOOTCOMMAND "run ubifsboot" + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " console=ttySAC0,115200n8" \ + " mem=128M" + +#define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \ + " mem=128M " \ + " " MTDPARTS_DEFAULT + +#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ + " onenand write 0x32008000 0x0 0x40000\0" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=" \ + "onenand erase 0x60000 0x300000;" \ + "onenand write 0x31008000 0x60000 0x300000\0" \ + "updateu=" \ + "onenand erase block 147-4095;" \ + "onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=" \ + "onenand read 0x30007FC0 0x60000 0x300000;" \ + "bootm 0x30007FC0\0" \ + "flashboot=" \ + "set bootargs root=/dev/mtdblock${bootblock} " \ + "rootfstype=${rootfstype} " \ + "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \ + "run bootk\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "android=" \ + "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ + "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "nfsboot=" \ + "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \ + "nfsroot=${nfsroot},nolock " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \ + "run bootk\0" \ + "ramboot=" \ + "set bootargs " CONFIG_RAMDISK_BOOT \ + " initrd=0x33000000,8M ramdisk=8192\0" \ + "rootfstype=cramfs\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "meminfo=mem=128M\0" \ + "nfsroot=/nfsroot/arm\0" \ + "bootblock=5\0" \ + "ubiblock=4\0" \ + "ubi=enabled" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "SMDKC100 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH 1 + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ +#define CONFIG_IDENT_STRING " for SMDKC100" + +#define CONFIG_SYS_64BIT_VSPRINTF + +#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000) +#define CONFIG_ENABLE_MMU +#endif + +#ifdef CONFIG_ENABLE_MMU +#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 +#else +#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE +#endif + +/*----------------------------------------------------------------------- + * Boot configuration + */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */ +#define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */ +#define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SAMSUNG_ONENAND 1 +#define CONFIG_SYS_ONENAND_BASE 0xE7100000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */ -- 2.39.5