From c2ad4162402865ef64f1b8518d7f44be71f362b7 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 12 Feb 2015 10:40:02 -0800 Subject: [PATCH] Add support for IT8781F IT8781F is mostly compatible to IT8782F. Major difference is that it only supports four instead of six UART channels, and therefore does not share the uart6 pins. Signed-off-by: Guenter Roeck --- README | 4 ++++ it87.c | 32 ++++++++++++++++++++++++-------- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/README b/README index 6211055..598fd0b 100644 --- a/README +++ b/README @@ -30,6 +30,10 @@ Supported chips: Prefix: 'it8728' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8781F + Prefix: 'it8781' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8782F Prefix: 'it8782' Addresses scanned: from Super I/O config space (8 I/O ports) diff --git a/it87.c b/it87.c index 125d158..a90628a 100644 --- a/it87.c +++ b/it87.c @@ -23,6 +23,7 @@ * IT8758E Super I/O chip w/LPC interface * IT8771E Super I/O chip w/LPC interface * IT8772E Super I/O chip w/LPC interface + * IT8781F Super I/O chip w/LPC interface * IT8782F Super I/O chip w/LPC interface * IT8783E/F Super I/O chip w/LPC interface * Sis950 A clone of the IT8705F @@ -67,7 +68,7 @@ #define DRVNAME "it87" enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771, - it8772, it8782, it8783, it8603 }; + it8772, it8781, it8782, it8783, it8603 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -147,6 +148,7 @@ static inline void superio_exit(void) #define IT8728F_DEVID 0x8728 #define IT8771E_DEVID 0x8771 #define IT8772E_DEVID 0x8772 +#define IT8781F_DEVID 0x8781 #define IT8782F_DEVID 0x8782 #define IT8783E_DEVID 0x8783 #define IT8603E_DEVID 0x8603 @@ -308,6 +310,12 @@ static const struct it87_devices it87_devices[] = { /* 16 bit fans (HWSensors4, OHM) */ .peci_mask = 0x07, }, + [it8781] = { + .name = "it8781", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET + | FEAT_TEMP_OLD_PECI, + .old_peci_mask = 0x4, + }, [it8782] = { .name = "it8782", .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET @@ -1762,6 +1770,9 @@ static int __init it87_find(unsigned short *address, case IT8772E_DEVID: sio_data->type = it8772; break; + case IT8781F_DEVID: + sio_data->type = it8781; + break; case IT8782F_DEVID: sio_data->type = it8782; break; @@ -1920,10 +1931,11 @@ static int __init it87_find(unsigned short *address, reg = superio_inb(IT87_SIO_GPIO3_REG); if (sio_data->type == it8721 || sio_data->type == it8728 || sio_data->type == it8771 || sio_data->type == it8772 || - sio_data->type == it8782) { + sio_data->type == it8781 || sio_data->type == it8782) { /* - * IT8721F/IT8758E, and IT8782F don't have VID pins - * at all, not sure about the IT8728F and compatibles. + * IT8721F/IT8758E, IT8728F, IT8772F, IT8781F, and + * IT8782F don't have VID pins at all, not sure about + * the IT8771F. */ sio_data->skip_vid = 1; } else { @@ -2148,7 +2160,8 @@ static int it87_probe(struct platform_device *pdev) data->in_scaled |= (1 << 8); /* in8 is Vbat */ if (sio_data->internal & (1 << 3)) data->in_scaled |= (1 << 9); /* in9 is AVCC */ - } else if (sio_data->type == it8782 || sio_data->type == it8783) { + } else if (sio_data->type == it8781 || sio_data->type == it8782 || + sio_data->type == it8783) { if (sio_data->internal & (1 << 0)) data->in_scaled |= (1 << 3); /* in3 is VCC5V */ if (sio_data->internal & (1 << 1)) @@ -2461,9 +2474,12 @@ static void it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } - /* IT8705F, IT8782F, and IT8783E/F only support three fans. */ - if (data->type != it87 && data->type != it8782 && - data->type != it8783) { + /* + * IT8705F, IT8781F, IT8782F, and IT8783E/F only support + * three fans. + */ + if (data->type != it87 && data->type != it8781 && + data->type != it8782 && data->type != it8783) { if (tmp & (1 << 4)) data->has_fan |= (1 << 3); /* fan4 enabled */ if (tmp & (1 << 5)) -- 2.39.5