From c41db358a0100ab85a55915ec8083ddcc9505933 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 3 Jun 2009 02:11:09 +0000 Subject: [PATCH] Update TODO file with more content and better style. git-svn-id: svn://svn.berlios.de/openocd/trunk@2020 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- TODO | 365 ++++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 236 insertions(+), 129 deletions(-) diff --git a/TODO b/TODO index 7b5b8323..ad0b8e5c 100644 --- a/TODO +++ b/TODO @@ -1,8 +1,9 @@ -/** @page thelist Pending and Open Tasks +/** @page tasks Pending and Open Tasks This page lists pending and open tasks being considered or worked upon by the OpenOCD community. +@section thelist The List Items with a current patch available should include a link to its posting on the openocd-developer mailing list archives. @@ -17,135 +18,241 @@ may have evolved an idea since it was added here. Feel free to send patches to add or clarify items on this list, too. -@verbatim -================================================================== - The List ------------------------------------------------------------------- -@endverbatim - -- JTAG/TAP changes: - - update all drivers to use tap_get_tms_path_len API. - - use tap_set_state everywhere to allow logging TAP state transitions - - rename other tap_states to use standard JTAG names (suggested by ML) - - retire jtag_add_end_state() and replace w/global variable. This also - removes TAP_INVALID as an argument to jtag_add_xxxx(). The global variable - as argument to jtag_add_xxxx() should eventually be phased out, but - the global variable is useful in an interim phase where one needs to - be bug by bug compatible before each change can be tested. Suggested - by ØH. Michael Bruck also interested in this. - -- JTAG Interfaces: - - autodetect devices present on the scan chain - - implement 'discover_taps' command - - FT2232 driver: (DH) - - integrate FTD2XX High-Speed Device support - - PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-April/005479.html - - massive set of changes (DH): - - fixes non-recoverability of cable connect/reconnect - - https://lists.berlios.de/pipermail/openocd-development/2009-May/006011.html - - further cleanup (DH): - - PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-May/006112.html - - fix outstanding bugs - - J-Link driver: (ZW) - - fix outstanding bugs - - test with known targets (i.e. working with other interfaces) - - test compatibility between v6.0 (yellow) and older units (e.g. v5.2) - - TCP driver: - - add TCP/IP client and server for remote JTAG interface control - - Do others need some help? Probably.... - -- Other Interfaces - - SVF/XSVF: - - pending tasks?? - - SPI/UART emulation: - - (ab)use bit-banging JTAG interfaces to emulate SPI/UART - - allow SPI to program flash, MCUs, etc. - - SWD - -- Target Support: - - general layer cleanup: - - https://lists.berlios.de/pipermail/openocd-development/2009-May/006590.html - - ARM11 improvements (MB?) - - fix single stepping (reported by ØH) - - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...) - - Cortex A8 support (ML) - - add target implementation (ML) - - what else remains to be done? - - MC1322x support (JW/DE?) - - integrate and test support from JW (and DE?) - - get working with a known good interface (i.e. not today's jlink) - - AT91SAM92xx: - - improvements for unknown-board-atmel-at91sam9260.cfg (RD) - - STR9x: (ZW) - - improvements to str912.cfg to be more general purpose - - AVR: (SQ) - - independently verify implementation - - incrementally improve working prototype in trunk. (SQ) - - work out how to debug this target - - AVR debugging protocol. - - FPGA: - - improve things (??) - - Coldfire (suggested by NC) - - can we draw from the BDM project? @par - http://bdm.sourceforge.net/ - - - other targets? (suggestions always welcome) - -- CFI: - - finish implementing bus width/chip width handling (suggested by NC) - - factor vendor-specific code into separate source files +@section thelisttcl TCL + +This section provides possible things to improve with OpenOCD's TCL support. + +- organize the TCL configurations: + - provide more directory structure for boards/targets? + - factor configurations into layers (encapsulation and re-use) + +- Isolate all TCL command support: + - Pure C CLI implementations using --disable-builtin-tcl. + - Allow developers to build new dongles using OpenOCD's JTAG core. + - At first, provide only low-level JTAG support; target layer and + above rely heavily on scripting event mechanisms. + - Allow full TCL support? add --with-tcl=/path/to/installed/tcl + - Move TCL support out of foo.[ch] and into foo_tcl.[ch] (other ideas?) + +@section thelistjtag JTAG + +This section list issues that need to be resolved in the JTAG layer. + +@subsection thelistjtagcore JTAG Core + +The following tasks have been suggeted for cleaning up the JTAG layer: + +- use tap_set_state everywhere to allow logging TAP state transitions +- rename other tap_states to use standard JTAG names (suggested by ML) +- retire jtag_add_end_state() and replace w/global variable: + - removes TAP_INVALID as an argument to jtag_add_xxxx(). + - global variable as argument to jtag_add_xxxx() should be phased out, but + it is useful while we need to bug-by-bug compatible while testing changes. + - Suggested by ØH. Michael Bruck also interested in this. +- Encapsulate cmd_queue_cur_state and related varaible handling. + +The following tasks have been suggested for adding new core JTAG support: + +- autodetect devices present on the scan chain + - implement 'discover_taps' command +- SPI/UART emulation: + - (ab)use bit-banging JTAG interfaces to emulate SPI/UART + - allow SPI to program flash, MCUs, etc. + +@subsection thelistjtaginterfaces JTAG Interfaces + +The following tasks have been suggeted for improving OpenOCD's JTAG +interface support: + +- rework USB communication to be more robust. Two possible options are: + -# use libusb-1.0.1 with libusb-compat-0.1.1 (non-blocking I/O wrapper) + -# rewrite implementation to use non-blocking I/O +- FT2232 driver: + - integrate FTD2XX High-Speed Device support @par + PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-April/005479.html + - fix outstanding bugs +- J-Link driver: + - fix to work with long scan chains, such as R.Doss's svf test. + - fix other outstanding bugs + +The following tasks have been suggested for adding new JTAG interfaces: + +- TCP driver: allow client/server for remote JTAG interface control. + +@section thelistswd Serial Wire Debug + +- implement Serial Wire Debug interface + +@section thelistbs Boundary Scan Support + +- add STAPL support? +- add BSDL support? + +A few possible options for the above: + -# Fake a TCL equivalent? + -# Integrate an existing library? + -# Write a new C implementation a la Jim? + +Once the above are completed: +- add support for programming flash using boundary scan techniques +- add integration with a modified gerber view program: + - provide means to view the PCB and select pins and traces + - allow use-cases such as the following: + - @b Stimulus + -# Double-click on a pin (or trace) with the mouse. + - @b Effects + -# The trace starts blinking, and + -# OpenOCD toggles the pin(s) 0/1. + +@section thelisttargets Target Support + +- general layer cleanup: + - https://lists.berlios.de/pipermail/openocd-development/2009-May/006590.html +- ARM11 improvements (MB?) + - fix single stepping (reported by ØH) + - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...) +- Cortex A8 support (ML) + - add target implementation (ML) +- MC1322x support (JW/DE?) + - integrate and test support from JW (and DE?) + - get working with a known good interface (i.e. not today's jlink) +- AT91SAM92xx: + - improvements for unknown-board-atmel-at91sam9260.cfg (RD) +- STR9x: (ZW) + - improvements to str912.cfg to be more general purpose +- AVR: (SQ) + - independently verify implementation + - incrementally improve working prototype in trunk. (SQ) + - work out how to debug this target + - AVR debugging protocol. +- FPGA: + - improve things (??) +- Coldfire (suggested by NC) + - can we draw from the BDM project? @par + http://bdm.sourceforge.net/ + + or the OSBDM package @par + http://forums.freescale.com/freescale/board/message?board.id=OSBDM08&thread.id=422 + +@section thelistsvf SVF/XSVF + +- factor and clean-up code +- review The Guide for OpenOCD Users for documentation errors or omissions +- update The Manual for OpenOCD Developerrs: + - add documentation describing the architecture of each module + - provide Technical Primers to bootstrap contributor knowledge +- develop SVF unit tests +- develop XSVF unit tests + +@section thelistflash Flash Support + +- finish documentation for the following flash drivers: + - avr + - ecosflash + - pic32mx + - ocl + - str9xpec + +@subsection thelistflashcfi CFI + +- finish implementing bus width/chip width handling (suggested by NC) +- factor vendor-specific code into separate source files - add new callback interface for vendor-specific code - - investigate/implement "thin wrapper" to use eCos CFI drivers (ØH) - -- TCL - - Isolate all TCL command support: - - Allow pure C CLI implementations using --disable-builtin-tcl. - Ref? How could this be made to work given targets extensive need - for events, etc.? What about the target library? - - Allow full TCL support? add --with-tcl=/path/to/installed/tcl - - Move TCL support in foo.* to foo_tcl.* (other ideas?) - -- Debugger Support - - Keil AGDI interface to OpenOCD (submitted by Dario Vecchio) - -- Architectural Upgrades - - Allow N:M:P mapping of servers, targets, and interfaces - - loadable module support for interface/target/flash drivers - - libopenocd support: @par - https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html - -- Test Suite: - - implement server unit tests - - implement JTAG core unit tests - - implement JTAG interface unit tests - - implement flash unit tests - - implement target unit tests - -- Test Feedback Tools: @par - https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html - - - extend target test script to produce helpful pass/fail output - - provide results submission script - - -- Generic Hardware Tester: - - implement VHDL to use for FPGA-based JTAG TAP testing device - - develop test suite that utilizes this testing device - -- Build Systems (Autotools, CMake, etc.) - - investigate fixes to permit the use of -Wshadow - - change bootstrap to call 'configure --enable-maintainer-mode '? - -- Miscellaneous: - - make JTAG and USB debug output a run-time configuration option - - review and clean up interface/target/flash APIs - - factor code to eliminate duplicated functionality - - overhaul use of types to improve 32/64-bit portability - -- Berlios Admin: - - use patch tracker? @par - https://developer.berlios.de/patch/?group_id=4148 - - use bug tracking? we need something! +- investigate/implement "thin wrapper" to use eCos CFI drivers (ØH) + +@section thelistdebug Debugger Support + +- integrate Keil AGDI interface to OpenOCD? (submitted by Dario Vecchio) + +@section thelisttesting Testing Suite + +This section includes several related groups of ideas: +- @ref thelistunittests +- @ref thelistsmoketests +- @ref thelisttestreports +- @ref thelisttestgenerichw + +@subsection thelistunittests Unit Tests + +- add testing skeleton to provide frameworks for adding tests +- implement server unit tests +- implement JTAG core unit tests +- implement JTAG interface unit tests +- implement flash unit tests +- implement target unit tests + +@subsection thelistsmoketests Smoke Test Tools + +-# extend 'make check' with a smoketest app + - checks for OOCD_TEST_CONFIG, etc. in environment (or config file) + - if properly set, runs the smoke test with specified parameters + - openocd -f ${OOCD_TEST_CONFIG} + - implies a modular test suite (see below) + - should be able to run some minimal tests with dummy interface: + - compare results of baseline sanity checks with expected results + +-# builds a more complete test suite: + - existing testing/examples/ look like a great start + - all targets should be tested fully and for all capabilities + - we do NOT want a "lowest common denominator" test suite + - ... but can we start with one to get going? + - probably requires one test configuration file per board/target + - modularization can occur here, just like with targets/boards/chips + - coverage can increase over time, building up bundles of tests + +-# add new 'smoketest' Makefile target: + - calls 'make check' (and the smoketest app) + - gather inputs and output into a report file + +@subsection thelisttestreports Test Feedback Tools + +These ideas were first introduced here: + https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html + +- provide report submission scripts for e-mail and web forms +- add new Makefile targets to post the report: + - 'checkreportsend' -- send to list via e-mail (via sendmail) + - 'checkreportpost' -- send web form (via curl or other script) + +@subsection thelisttestgenerichw Generic Hardware Tester + +- implement VHDL to use for FPGA-based JTAG TAP testing device +- develop test suite that utilizes this testing device + +@section thelistautotools Autotools Build System + +- investigate fixes to permit the use of -Wshadow +- eliminate sources of confusion in @c boostrap script: + -# Make @c bootstrap call 'configure --enable-maintainer-mode '? + -# Add @c buildstrap script to assist with boostrap and configure steps. +- automatically build tool-chains required for cross-compiling + - produce mingw32, arm-elf, others using in-tree scripts + - build all required target code from sources +- make JTAG and USB debug output a run-time configuration option + +@section thelistarchitecture Architectural Tasks + +The following architectural tasks need to be accomplished and should be +fairly easy to complete: + +- factor code to eliminate duplicated functionality +- overhaul use of types to improve 32/64-bit portability +- rewrite code that uses casts to access 16-bit and larger types + from unaligned memory addresses +- libopenocd support: @par + https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html +- review and clean up interface/target/flash APIs + +The following strategic tasks will require ambition, knowledge, and time +to complete: + +- Allow N:M:P mapping of servers, targets, and interfaces +- loadable module support for interface/target/flash drivers + +@section thelistadmin Administrative Tasks + +- Develop "style" guidelines for committing to Subversion +- Develop milestone and release guidelines. */ /** @file -- 2.39.5