From c474a8ebb880e564df0c701c6a8cf73b7779b1d2 Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Mon, 31 May 2010 22:02:42 +0900 Subject: [PATCH] s5pc1xx: Add support for Samsung Goni board This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang Signed-off-by: Kyungmin Park --- MAINTAINERS | 9 +- MAKEALL | 1 + Makefile | 3 + board/samsung/goni/Makefile | 54 +++ board/samsung/goni/config.mk | 16 + board/samsung/goni/goni.c | 55 +++ board/samsung/goni/lowlevel_init.S | 585 +++++++++++++++++++++++++++++ board/samsung/goni/mem_setup.S | 265 +++++++++++++ board/samsung/goni/onenand.c | 36 ++ include/configs/s5p_goni.h | 217 +++++++++++ 10 files changed, 1237 insertions(+), 4 deletions(-) create mode 100644 board/samsung/goni/Makefile create mode 100644 board/samsung/goni/config.mk create mode 100644 board/samsung/goni/goni.c create mode 100644 board/samsung/goni/lowlevel_init.S create mode 100644 board/samsung/goni/mem_setup.S create mode 100644 board/samsung/goni/onenand.c create mode 100644 include/configs/s5p_goni.h diff --git a/MAINTAINERS b/MAINTAINERS index 4cf8f3538f..710f6eb5d6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -635,14 +635,15 @@ Simon Kagstrom openrd_base ARM926EJS (Kirkwood SoC) -Minkyu Kang - - SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) - Nishant Kamat omap1610h2 ARM926EJS +Minkyu Kang + + s5p_goni ARM CORTEX-A8 (S5PC110 SoC) + SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) + Frederik Kriewitz devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) diff --git a/MAKEALL b/MAKEALL index 4ba21064c4..b07b6f467d 100755 --- a/MAKEALL +++ b/MAKEALL @@ -652,6 +652,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_sdp3430 \ omap3_zoom1 \ omap3_zoom2 \ + s5p_goni \ smdkc100 \ " diff --git a/Makefile b/Makefile index a01df55179..36aac29e85 100644 --- a/Makefile +++ b/Makefile @@ -3186,6 +3186,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +s5p_goni_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx diff --git a/board/samsung/goni/Makefile b/board/samsung/goni/Makefile new file mode 100644 index 0000000000..9b4c886597 --- /dev/null +++ b/board/samsung/goni/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := goni.o onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk new file mode 100644 index 0000000000..2da9ca1c92 --- /dev/null +++ b/board/samsung/goni/config.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2008 # Samsung Elecgtronics +# Kyungmin Park +# + +# On S5PC100 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x38000000 to 0x40000000 (128MiB) +# +# On S5PC110 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x40000000 to 0x50000000 (256MiB) +# +TEXT_BASE = 0x34800000 diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c new file mode 100644 index 0000000000..e512c59088 --- /dev/null +++ b/board/samsung/goni/goni.c @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_GONI; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board:\tGoni\n"); + return 0; +} +#endif diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S new file mode 100644 index 0000000000..4b729927f4 --- /dev/null +++ b/board/samsung/goni/lowlevel_init.S @@ -0,0 +1,585 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +/* + * Register usages: + * + * r5 has zero always + * r7 has S5PC100 GPIO base, 0xE0300000 + * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively + * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r11, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r7, =S5PC100_GPIO_BASE + ldr r8, =S5PC100_GPIO_BASE + /* Read CPU ID */ + ldr r2, =S5PC1XX_PRO_ID + ldr r0, [r2] + mov r1, #0x00010000 + and r0, r0, r1 + cmp r0, r5 + beq 100f + ldr r8, =S5PC110_GPIO_BASE +100: + /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */ + cmp r7, r8 + beq skip_check_didle @ Support C110 only + + ldr r0, =S5PC110_RST_STAT + ldr r1, [r0] + and r1, r1, #0x000D0000 + cmp r1, #(0x1 << 19) @ DEEPIDLE_WAKEUP + beq didle_wakeup + cmp r7, r8 + +skip_check_didle: + addeq r0, r8, #0x280 @ S5PC100_GPIO_J4 + addne r0, r8, #0x2C0 @ S5PC110_GPIO_J4 + ldr r1, [r0, #0x0] @ GPIO_CON_OFFSET + bic r1, r1, #(0xf << 4) @ 1 * 4-bit + orr r1, r1, #(0x1 << 4) + str r1, [r0, #0x0] @ GPIO_CON_OFFSET + + ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET +#ifdef CONFIG_ONENAND_IPL + orr r1, r1, #(1 << 1) @ 1 * 1-bit +#else + bic r1, r1, #(1 << 1) +#endif + str r1, [r0, #0x4] @ GPIO_DAT_OFFSET + + /* Don't setup at s5pc100 */ + beq 100f + + /* + * Initialize Async Register Setting for EVT1 + * Because we are setting EVT1 as the default value of EVT0, + * setting EVT0 as well does not make things worse. + * Thus, for the simplicity, we set for EVT0, too + * + * The "Async Registers" are: + * 0xE0F0_0000 + * 0xE1F0_0000 + * 0xF180_0000 + * 0xF190_0000 + * 0xF1A0_0000 + * 0xF1B0_0000 + * 0xF1C0_0000 + * 0xF1D0_0000 + * 0xF1E0_0000 + * 0xF1F0_0000 + * 0xFAF0_0000 + */ + ldr r0, =0xe0f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xe1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1800000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1900000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1a00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1b00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1c00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1d00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1e00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xfaf00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + /* + * Diable ABB block to reduce sleep current at low temperature + * Note that it's hidden register setup don't modify it + */ + ldr r0, =0xE010C300 + ldr r1, =0x00800000 + str r1, [r0] + +100: + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + /* Do not release retention here for S5PC110 */ + streq r1, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* Disable Watchdog */ + ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000 + ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000 + str r5, [r0] + + /* setting SRAM */ + ldreq r0, =S5PC100_SROMC_BASE + ldrne r0, =S5PC110_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5PC100 has 3 groups of interrupt sources */ + ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000 + ldrne r0, =S5PC110_VIC0_BASE @ 0xF2000000 + add r1, r0, #0x00100000 + add r2, r0, #0x00200000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @ INTENCLEAR + str r3, [r1, #0x14] @ INTENCLEAR + str r3, [r2, #0x14] @ INTENCLEAR + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @ INTSELECT + str r5, [r1, #0xc] @ INTSELECT + str r5, [r2, #0xc] @ INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @ INTADDRESS + str r5, [r1, #0xf00] @ INTADDRESS + str r5, [r2, #0xf00] @ INTADDRESS +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init + + bl internal_ram_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + /* OneNAND Sync Read Support at S5PC110 only + * RM[15] : Sync Read + * BRWL[14:12] : 7 CLK + * BL[11:9] : Continuous + * VHF[3] : Very High Frequency Enable (Over 83MHz) + * HF[2] : High Frequency Enable (Over 66MHz) + * WM[1] : Sync Write + */ + cmp r7, r8 + ldrne r1, =0xE006 + ldrne r0, =0xB001E442 + strneh r1, [r0] + + /* + * GCE[26] : Gated Clock Enable + * RPE[17] : Enables Read Prefetch + */ + ldrne r1, =((1 << 26) | (1 << 17) | 0xE006) + ldrne r0, =0xB0600000 + strne r1, [r0, #0x100] @ ONENAND_IF_CTRL + ldrne r1, =0x1212 + strne r1, [r0, #0x108] + + /* Board detection to set proper memory configuration */ + cmp r7, r8 + moveq r9, #1 /* r9 has 1Gib default at s5pc100 */ + movne r9, #2 /* r9 has 2Gib default at s5pc110 */ + + ldr r2, =0xE0200200 + ldr r4, [r2, #0x48] + + bic r1, r4, #(0x3F << 4) /* PULLUP_DISABLE: 3 * 2-bit */ + bic r1, r1, #(0x3 << 2) /* PULLUP_DISABLE: 2 * 2-bit */ + bic r1, r1, #(0x3 << 14) /* PULLUP_DISABLE: 2 * 2-bit */ + str r1, [r2, #0x48] + /* For write completion */ + nop + nop + + ldr r3, [r2, #0x44] + and r1, r3, #(0x7 << 2) + mov r1, r1, lsr #2 + cmp r1, #0x5 + moveq r9, #3 + cmp r1, #0x6 + moveq r9, #1 + cmp r1, #0x7 + moveq r9, #2 + and r0, r3, #(0x1 << 1) + mov r0, r0, lsr #1 + orr r1, r1, r0, lsl #3 + cmp r1, #0x8 + moveq r9, #3 + and r1, r3, #(0x7 << 2) + mov r1, r1, lsr #2 + and r0, r3, #(0x1 << 7) + mov r0, r0, lsr #7 + orr r1, r1, r0, lsl #3 + cmp r1, #0x9 + moveq r9, #3 + str r4, [r2, #0x48] /* Restore PULLUP configuration */ + + bl mem_ctrl_asm_init + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldreq r0, =S5PC100_RST_STAT + ldrne r0, =S5PC110_RST_STAT + ldr r1, [r0] + biceq r1, r1, #0xfffffff7 + moveq r2, #(1 << 3) + bicne r1, r1, #0xfffeffff + movne r2, #(1 << 16) + cmp r1, r2 + bne 1f +wakeup: + /* turn off L2 cache */ + bl l2_cache_disable + + cmp r7, r8 + ldreq r0, =0xC100 + ldrne r0, =0xC110 + + /* invalidate L2 cache also */ + bl invalidate_dcache + + /* turn on L2 cache */ + bl l2_cache_enable + + cmp r7, r8 + /* Load return address and jump to kernel */ + ldreq r0, =S5PC100_INFORM0 + ldrne r0, =S5PC110_INFORM0 + + /* r1 = physical address of s5pc1xx_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep-s5pc1xx.S) */ + mov pc, r1 + nop + nop +#else + cmp r7, r8 + /* Clear wakeup status register */ + ldreq r0, =S5PC100_WAKEUP_STAT + ldrne r0, =S5PC110_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + str r1, [r0] + +#endif + b 1f + +didle_wakeup: + /* Wait when APLL is locked */ + ldr r0, =0xE0100100 @ S5PC110_APLL_CON +lockloop: + ldr r1, [r0] + and r1, r1, #(1 << 29) + cmp r1, #(1 << 29) + bne lockloop + + ldr r0, =S5PC110_INFORM0 + ldr r1, [r0] + mov pc, r1 + nop + nop + nop + nop + nop + +1: + mov lr, r11 + mov pc, lr + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f +100: + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x000] @ S5PC100_APLL_LOCK + str r1, [r0, #0x004] @ S5PC100_MPLL_LOCK + str r1, [r0, #0x008] @ S5PC100_EPLL_LOCK + str r1, [r0, #0x00C] @ S5PC100_HPLL_LOCK + + /* S5P_APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1333MHz) + str r1, [r0, #0x100] + /* S5P_MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r0, #0x104] + /* S5P_EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r0, #0x108] + /* S5P_HPLL_CON */ + ldr r1, =0x80600603 @ SDIV 3, PDIV 6, MDIV 96 + str r1, [r0, #0x10C] + + ldr r1, [r0, #0x300] + ldr r2, =0x00003fff + bic r1, r1, r2 + ldr r2, =0x00011301 + + orr r1, r1, r2 + str r1, [r0, #0x300] + ldr r1, [r0, #0x304] + ldr r2, =0x00011110 + orr r1, r1, r2 + str r1, [r0, #0x304] + ldr r1, =0x00000001 + str r1, [r0, #0x308] + + /* Set Source Clock */ + ldr r1, =0x00001111 @ A, M, E, HPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + b 200f +110: + ldr r0, =0xE010C000 @ S5PC110_PWR_CFG + + /* Set OSC_FREQ value */ + ldr r1, =0xf + str r1, [r0, #0x100] @ S5PC110_OSC_FREQ + + /* Set MTC_STABLE value */ + ldr r1, =0xffffffff + str r1, [r0, #0x110] @ S5PC110_MTC_STABLE + + /* Set CLAMP_STABLE value */ + ldr r1, =0x3ff03ff + str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE + + ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5 + str r1, [r0, #0x300] + ldr r1, =0x11110111 @ UART[3210]: MMC[3210] + str r1, [r0, #0x310] + + /* Set Lock Time */ + ldr r1, =0x2cf @ Locktime : 30us + str r1, [r0, #0x000] @ S5PC110_APLL_LOCK + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x008] @ S5PC110_MPLL_LOCK + str r1, [r0, #0x010] @ S5PC110_EPLL_LOCK + str r1, [r0, #0x020] @ S5PC110_VPLL_LOCK + + /* S5PC110_APLL_CON */ + ldr r1, =0x80C80601 @ 800MHz + str r1, [r0, #0x100] + /* S5PC110_MPLL_CON */ + ldr r1, =0x829B0C01 @ 667MHz + str r1, [r0, #0x108] + /* S5PC110_EPLL_CON */ + ldr r1, =0x80600602 @ 96MHz VSEL 0 P 6 M 96 S 2 + str r1, [r0, #0x110] + /* S5PC110_VPLL_CON */ + ldr r1, =0x806C0603 @ 54MHz + str r1, [r0, #0x120] + + /* Set Source Clock */ + ldr r1, =0x10001111 @ A, M, E, VPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + /* OneDRAM(DMC0) clock setting */ + ldr r1, =0x01000000 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL + str r1, [r0, #0x218] @ S5PC110_CLK_SRC6 + ldr r1, =0x30000000 @ ONEDRAM_RATIO[31:28] 3 + 1 + str r1, [r0, #0x318] @ S5PC110_CLK_DIV6 + + /* XCLKOUT = XUSBXTI 24MHz */ + add r2, r0, #0xE000 @ S5PC110_OTHERS + ldr r1, [r2] + orr r1, r1, #(0x3 << 8) @ CLKOUT[9:8] 3 XUSBXTI + str r1, [r2] + + /* CLK_IP0 */ + ldr r1, =0x8fefeeb @ DMC[1:0] PDMA0[3] IMEM[5] + str r1, [r0, #0x460] @ S5PC110_CLK_IP0 + + /* CLK_IP1 */ + ldr r1, =0xe9fdf0f9 @ FIMD[0] USBOTG[16] + @ NANDXL[24] + str r1, [r0, #0x464] @ S5PC110_CLK_IP1 + + /* CLK_IP2 */ + ldr r1, =0xf75f7fc @ CORESIGHT[8] MODEM[9] + @ HOSTIF[10] HSMMC0[16] + @ HSMMC2[18] VIC[27:24] + str r1, [r0, #0x468] @ S5PC110_CLK_IP2 + + /* CLK_IP3 */ + ldr r1, =0x8eff038c @ I2C[8:6] + @ SYSTIMER[16] UART0[17] + @ UART1[18] UART2[19] + @ UART3[20] WDT[22] + @ PWM[23] GPIO[26] SYSCON[27] + str r1, [r0, #0x46c] @ S5PC110_CLK_IP3 + + /* CLK_IP4 */ + ldr r1, =0xfffffff1 @ CHIP_ID[0] TZPC[8:5] + str r1, [r0, #0x470] @ S5PC110_CLK_IP3 + +200: + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +internal_ram_init: + ldreq r0, =0xE3800000 + ldrne r0, =0xF1500000 + ldr r1, =0x0 + str r1, [r0] + + mov pc, lr +#endif + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + /* set GPIO to enable UART0-UART4 */ + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ S5PC100_GPIO_A0_OFFSET + ldr r1, =0x00002222 + str r1, [r0, #0x20] @ S5PC100_GPIO_A1_OFFSET + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f + + /* UART_SEL GPK0[5] at S5PC100 */ + add r0, r8, #0x2A0 @ S5PC100_GPIO_K0_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 20) @ 20 = 5 * 4-bit + orr r1, r1, #(0x1 << 20) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 10) @ 10 = 5 * 2-bit + orr r1, r1, #(0x2 << 10) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 5) @ 5 = 5 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + + b 200f +110: + /* + * Note that the following address + * 0xE020'0360 is reserved address at S5PC100 + */ + /* UART_SEL MP0_5[7] at S5PC110 */ + add r0, r8, #0x360 @ S5PC110_GPIO_MP0_5_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit + orr r1, r1, #(0x1 << 28) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit + orr r1, r1, #(0x2 << 14) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET +200: + mov pc, lr +#endif diff --git a/board/samsung/goni/mem_setup.S b/board/samsung/goni/mem_setup.S new file mode 100644 index 0000000000..c4d284541e --- /dev/null +++ b/board/samsung/goni/mem_setup.S @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2009 Samsung Electrnoics + * Minkyu Kang + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + cmp r7, r8 + + ldreq r0, =S5PC100_DMC_BASE @ 0xE6000000 + ldrne r0, =S5PC110_DMC0_BASE @ 0xF0000000 + ldrne r6, =S5PC110_DMC1_BASE @ 0xF1400000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + ldr r1, =0x000000f4 + str r1, [r0, #0x01C] @ PHYCONTROL1_OFFSET + strne r1, [r6, #0x01C] @ PHYCONTROL1_OFFSET + ldreq r1, =0x0 + streq r1, [r0, #0x020] @ PHYCONTROL2_OFFSET + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + mov r2, #0x4000 +wait: subs r2, r2, #0x1 + cmp r2, #0x0 + bne wait + + cmp r7, r8 + /* Force value locking for DLL off */ + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* DLL off */ + ldr r1, =0x50101009 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* auto refresh off */ + ldr r1, =0xff001010 | (1 << 7) + ldr r2, =0xff001010 | (1 << 7) + str r1, [r0, #0x000] @ CONCONTROL_OFFSET + strne r2, [r6, #0x000] @ CONCONTROL_OFFSET + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + ldr r2, =0x00212100 + str r1, [r0, #0x004] @ MEMCONTROL_OFFSET + strne r2, [r6, #0x004] @ MEMCONTROL_OFFSET + + /* + * Note: + * If Bank0 has Mobile RAM we place it at 0x3800'0000 (s5pc100 only) + * So finally Bank1 OneDRAM should address start at at 0x3000'0000 + */ + + /* + * DMC0: CS0 : S5PC100/S5PC110 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r3, =0x30f80222 + ldr r4, =0x40f00222 +swap_memory: + str r3, [r0, #0x008] @ MEMCONFIG0_OFFSET + str r4, [r0, #0x00C] @ dummy write + + /* + * DMC1: CS0 : S5PC110 + * 0x40 -> 0x40000000 + * 0xf8 -> 0x47FFFFFF (1Gib) + * 0x40 -> 0x40000000 + * 0xf0 -> 0x4FFFFFFF (2Gib) + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits - Col (1Gib) + * [11:8 ] 3: 10 bits - Col (2Gib) + * [ 7:4 ] 2: 14 bits - Row + * [ 3:0 ] 2: 4 banks + */ + /* Default : 2GiB */ + ldr r4, =0x40f01322 @ 2Gib: MCP B + ldr r5, =0x50f81312 @ dummy: MCP D + cmp r9, #1 + ldreq r4, =0x40f81222 @ 1Gib: MCP A + cmp r9, #3 + ldreq r5, =0x50f81312 @ 2Gib + 1Gib: MCP D + cmp r9, #4 + ldreq r5, =0x50f01312 @ 2Gib + 2Gib: MCP E + + cmp r7, r8 + strne r4, [r6, #0x008] @ MEMCONFIG0_OFFSET + strne r5, [r6, #0x00C] @ MEMCONFIG1_OFFSET + + /* + * DMC0: CS1: S5PC100 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + eoreq r3, r3, #0x08000000 + streq r3, [r0, #0xc] @ MEMCONFIG1_OFFSET + + ldr r1, =0x20000000 + str r1, [r0, #0x014] @ PRECHCONFIG_OFFSET + strne r1, [r0, #0x014] @ PRECHCONFIG_OFFSET + strne r1, [r6, #0x014] @ PRECHCONFIG_OFFSET + + /* + * S5PC100: + * DMC: CS0: 166MHz + * CS1: 166MHz + * S5PC110: + * DMC0: CS0: 166MHz + * DMC1: CS0: 200MHz + * + * 7.8us * 200MHz %LE %LONG1560(0x618) + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + */ + ldr r1, =0x0000050E + str r1, [r0, #0x030] @ TIMINGAREF_OFFSET + ldrne r1, =0x00000618 + strne r1, [r6, #0x030] @ TIMINGAREF_OFFSET + + ldr r1, =0x14233287 + str r1, [r0, #0x034] @ TIMINGROW_OFFSET + ldrne r1, =0x182332c8 + strne r1, [r6, #0x034] @ TIMINGROW_OFFSET + + ldr r1, =0x12130005 + str r1, [r0, #0x038] @ TIMINGDATA_OFFSET + ldrne r1, =0x13130005 + strne r1, [r6, #0x038] @ TIMINGDATA_OFFSET + + ldr r1, =0x0E140222 + str r1, [r0, #0x03C] @ TIMINGPOWER_OFFSET + ldrne r1, =0x0E180222 + strne r1, [r6, #0x03C] @ TIMINGPOWER_OFFSET + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + /* chip0 REFA */ + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 MRS */ + ldr r1, =0x00000032 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 EMRS */ + ldr r1, =0x00020020 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + /* chip1 REFA */ + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 MRS */ + ldr r1, =0x00100032 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 EMRS */ + ldr r1, =0x00120020 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* auto refresh on */ + ldr r1, =0xFF002030 | (1 << 7) + str r1, [r0, #0x000] @ CONCONTROL_OFFSET + strne r1, [r6, #0x000] @ CONCONTROL_OFFSET + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r0, #0x028] @ PWRDNCONFIG_OFFSET + strne r1, [r6, #0x028] @ PWRDNCONFIG_OFFSET + + ldr r1, =0x00212113 + str r1, [r0, #0x004] @ MEMCONTROL_OFFSET + strne r1, [r6, #0x004] @ MEMCONTROL_OFFSET + + /* Skip when S5PC110 */ + bne 1f + + /* Check OneDRAM access area at s5pc100 */ + ldreq r3, =0x38f80222 + ldreq r1, =0x37ffff00 + str r3, [r1] + ldr r2, [r1] + cmp r2, r3 + beq swap_memory +1: + mov pc, lr + + .ltorg diff --git a/board/samsung/goni/onenand.c b/board/samsung/goni/onenand.c new file mode 100644 index 0000000000..8d3769b916 --- /dev/null +++ b/board/samsung/goni/onenand.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; +} diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h new file mode 100644 index 0000000000..171ec94e76 --- /dev/null +++ b/include/configs/s5p_goni.h @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang + * Kyungmin Park + * + * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5PC110 1 /* which is in a S5PC110 */ +#define CONFIG_MACH_GONI 1 /* working with Goni */ + +#include /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* input clock of PLL: has 24MHz input clock at S5PC110 */ +#define CONFIG_SYS_CLK_FREQ_C110 24000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ +/* + * select serial console configuration + */ +#define CONFIG_SERIAL2 1 /* use SERIAL2 */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 115200 + +/* It should define before config_cmd_default.h */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Command definition */ +#include + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ +#define MTDIDS_DEFAULT "onenand0=samsung-onenand" +#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:1m(bootloader)"\ + ",256k(params)"\ + ",2816k(config)"\ + ",8m(csa)"\ + ",7m(kernel)"\ + ",1m(log)"\ + ",12m(modem)"\ + ",60m(qboot)"\ + ",-(UBI)\0" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#define CONFIG_BOOTCOMMAND "run ubifsboot" + +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " ${console} ${meminfo}" + +#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ + " onenand write 0x32008000 0x0 0x100000\0" + +#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" + +#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=" \ + "onenand erase 0xc00000 0x600000;" \ + "onenand write 0x31008000 0xc00000 0x600000\0" \ + "updateu=" \ + "onenand erase 0x01560000 0x1eaa0000;" \ + "onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=" \ + "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "bootm 0x30007FC0\0" \ + "flashboot=" \ + "set bootargs root=/dev/mtdblock${bootblock} " \ + "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "tftpboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ + "bootm 0x30007FC0\0" \ + "ramboot=" \ + "set bootargs " CONFIG_RAMDISK_BOOT \ + " initrd=0x33000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ + CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ + "verify=n\0" \ + "rootfstype=cramfs\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mtdparts=" MTDPARTS_DEFAULT \ + "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ + "mmcblk=/dev/mmcblk1p1\0" \ + "bootblock=9\0" \ + "ubiblock=8\0" \ + "ubi=enabled\0" \ + "opts=always_resume=1" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Goni # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* Goni has 3 banks of DRAM, but swap the bank */ +#define CONFIG_NR_DRAM_BANKS 3 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ +#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */ +#define PHYS_SDRAM_2 0x40000000 /* mDDR DMC1 Bank #1 */ +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #1 */ +#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ +#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ + +/* FLASH and environment organization */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ +#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SAMSUNG_ONENAND 1 +#define CONFIG_SYS_ONENAND_BASE 0xB0000000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */ -- 2.39.5