From c4a3c7442bfcd226da8fe8747c3d7141fc531348 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 19 Jan 2011 04:40:36 +0000 Subject: [PATCH] MX51EVK: Use SWx macros in PMIC init Signed-off-by: Marek Vasut --- board/freescale/mx51evk/mx51evk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 7c50c54cd4..02a765dcfb 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -198,17 +198,17 @@ static void power_init(void) /* Set core voltage to 1.1V */ val = pmic_reg_read(REG_SW_0); - val = (val & (~0x1F)) | 0x14; + val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; pmic_reg_write(REG_SW_0, val); /* Setup VCC (SW2) to 1.25 */ val = pmic_reg_read(REG_SW_1); - val = (val & (~0x1F)) | 0x1A; + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; pmic_reg_write(REG_SW_1, val); /* Setup 1V2_DIG1 (SW3) to 1.25 */ val = pmic_reg_read(REG_SW_2); - val = (val & (~0x1F)) | 0x1A; + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; pmic_reg_write(REG_SW_2, val); udelay(50); -- 2.39.5