From c73342fbe77b0d0432ce189566e0e8383f2b7493 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Thu, 28 Jul 2011 11:44:48 +0100 Subject: [PATCH] docs: update to use new stm32 driver names Signed-off-by: Spencer Oliver --- doc/openocd.texi | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index dfb8e30d..069367d9 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -1277,7 +1277,7 @@ at91sam3u4c.cfg lm3s9b9x.cfg samsung_s3c6410.cfg at91sam3u4e.cfg lpc1768.cfg sharp_lh79532.cfg at91sam3uXX.cfg lpc2103.cfg smdk6410.cfg at91sam7sx.cfg lpc2124.cfg smp8634.cfg -at91sam9260.cfg lpc2129.cfg stm32.cfg +at91sam9260.cfg lpc2129.cfg stm32f1x.cfg c100.cfg lpc2148.cfg str710.cfg c100config.tcl lpc2294.cfg str730.cfg c100helper.tcl lpc2378.cfg str750.cfg @@ -4762,44 +4762,51 @@ applied to all of them. @end quotation @end deffn -@deffn {Flash Driver} stm32x -All members of the STM32 microcontroller family from ST Microelectronics +@deffn {Flash Driver} stm32f1x +All members of the STM32f1x microcontroller family from ST Microelectronics include internal flash and use ARM Cortex M3 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @example -flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME +flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME @end example -Some stm32x-specific commands -@footnote{Currently there is a @command{stm32x mass_erase} command. +Some stm32f1x-specific commands +@footnote{Currently there is a @command{stm32f1x mass_erase} command. That seems pointless since the same effect can be had using the standard @command{flash erase_address} command.} are defined: -@deffn Command {stm32x lock} num +@deffn Command {stm32f1x lock} num Locks the entire stm32 device. The @var{num} parameter is a value shown by @command{flash banks}. @end deffn -@deffn Command {stm32x unlock} num +@deffn Command {stm32f1x unlock} num Unlocks the entire stm32 device. The @var{num} parameter is a value shown by @command{flash banks}. @end deffn -@deffn Command {stm32x options_read} num +@deffn Command {stm32f1x options_read} num Read and display the stm32 option bytes written by -the @command{stm32x options_write} command. +the @command{stm32f1x options_write} command. The @var{num} parameter is a value shown by @command{flash banks}. @end deffn -@deffn Command {stm32x options_write} num (@option{SWWDG}|@option{HWWDG}) (@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP}) +@deffn Command {stm32f1x options_write} num (@option{SWWDG}|@option{HWWDG}) (@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP}) Writes the stm32 option byte with the specified values. The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @end deffn +@deffn {Flash Driver} stm32f2x +All members of the STM32f2x microcontroller family from ST Microelectronics +include internal flash and use ARM Cortex M3 cores. +The driver automatically recognizes a number of these chips using +the chip identification register, and autoconfigures itself. +@end deffn + @deffn {Flash Driver} str7x All members of the STR7 microcontroller family from ST Microelectronics include internal flash and use ARM7TDMI cores. -- 2.39.5