From c7b269ace1bbe07d5db7a562bb9242f4be32be67 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Fri, 16 Apr 2010 01:17:01 +0800 Subject: [PATCH] NOR/CFI: check "flash bank" command arguments Arguments chip_width and bus_width of command "flash bank" are not fully checked. While bus_width is later on redundantly checked in several other parts (e.g. in cfi_command_val()) and generates run-time error, chip_width is never checked, nor related to actual bus_width value. Added check to avoid: - (chip_width == 0), that would mean no memory chip at all, avoiding also division by zero e.g. in cfi_get_u8(); - (bus_width == 0), that would mean no bus at all; - unsupported cases of chip_width or bus_width value not power of 2; - unsupported case of chip width wider than bus. Signed-off-by: Antonio Borneo --- src/flash/nor/cfi.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c index 2235c85c..ba2d9095 100644 --- a/src/flash/nor/cfi.c +++ b/src/flash/nor/cfi.c @@ -624,8 +624,18 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command) return ERROR_FLASH_BANK_INVALID; } + /* both widths must: + * - not exceed max value; + * - not be null; + * - be equal to a power of 2. + * bus must be wide enought to hold one chip */ if ((bank->chip_width > CFI_MAX_CHIP_WIDTH) - || (bank->bus_width > CFI_MAX_BUS_WIDTH)) + || (bank->bus_width > CFI_MAX_BUS_WIDTH) + || (bank->chip_width == 0) + || (bank->bus_width == 0) + || (bank->chip_width & (bank->chip_width - 1)) + || (bank->bus_width & (bank->bus_width - 1)) + || (bank->chip_width > bank->bus_width)) { LOG_ERROR("chip and bus width have to specified in bytes"); return ERROR_FLASH_BANK_INVALID; -- 2.39.5