From c997da5c53586e0cb220d94179f922e865cffb62 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 10:08:50 +0530 Subject: [PATCH] ARM: DRA7: emif: Fix DDR init sequence during warm reset Unlike OMAP5, EMIF PHY used in DRA7 will be left in unknown state after warm reset, emif needs to be configured to bring it back to a known state. So configure EMIF during warm reset. Reported-by: Roger Quadros Signed-off-by: Lokesh Vutla --- arch/arm/cpu/armv7/omap-common/emif-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index ca22c00601..f5b22f6a78 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1170,7 +1170,7 @@ static void do_sdram_init(u32 base) * Changing the timing registers in EMIF can happen(going from one * OPP to another) */ - if (!(in_sdram || warm_reset())) { + if (!in_sdram && (!warm_reset() || is_dra7xx())) { if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); @@ -1178,7 +1178,7 @@ static void do_sdram_init(u32 base) ddr3_init(base, regs); } if (warm_reset() && (emif_sdram_type(regs->sdram_config) == - EMIF_SDRAM_TYPE_DDR3)) { + EMIF_SDRAM_TYPE_DDR3) && !is_dra7xx()) { set_lpmode_selfrefresh(base); emif_reset_phy(base); omap5_ddr3_leveling(base, regs); -- 2.39.5