From ca511cfb2a7ce9d431811efab11165b6b088f0e0 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 28 Jul 2012 01:19:32 +0000 Subject: [PATCH] OMAP3: igep00x0: Add config option to choose flash storage memory IGEP-based boards can have two different flash memories, a OneNAND or a NAND device. Add a configuration option for to choose which memory to use. Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra --- board/isee/igep0020/igep0020.h | 4 ++++ board/isee/igep0030/igep0030.h | 4 ++++ boards.cfg | 6 ++++-- include/configs/igep00x0.h | 19 +++++++++++++++++++ 4 files changed, 31 insertions(+), 2 deletions(-) diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h index 3d6e15fb73..3335ecc787 100644 --- a/board/isee/igep0020/igep0020.h +++ b/board/isee/igep0020/igep0020.h @@ -26,7 +26,11 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, "IGEP v2 board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", +#else + "NAND", +#endif }; static void setup_net_chip(void); diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep0030/igep0030.h index b7ce5aa663..a93339daab 100644 --- a/board/isee/igep0030/igep0030.h +++ b/board/isee/igep0030/igep0030.h @@ -26,7 +26,11 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, "OMAP3 IGEP module", +#if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", +#else + "NAND", +#endif }; /* diff --git a/boards.cfg b/boards.cfg index a000914708..47e0c647c7 100644 --- a/boards.cfg +++ b/boards.cfg @@ -229,8 +229,10 @@ cm_t35 arm armv7 cm_t35 - omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 -igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020 -igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030 +igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND +igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND +igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND +igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index a0a23a79fd..d8e87c30fd 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -105,7 +105,12 @@ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ +#ifdef CONFIG_BOOT_ONENAND #define CONFIG_CMD_ONENAND /* ONENAND support */ +#endif +#ifdef CONFIG_BOOT_NAND +#define CONFIG_CMD_NAND +#endif #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING @@ -244,6 +249,7 @@ * FLASH and environment organization */ +#ifdef CONFIG_BOOT_ONENAND #define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP @@ -253,6 +259,19 @@ #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ #define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET +#endif + +#ifdef CONFIG_BOOT_NAND +#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_BASE NAND_BASE +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ +#define CONFIG_ENV_ADDR NAND_ENV_OFFSET +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * Size of malloc() pool -- 2.39.5