From ca7ec066b23419dd8139174b24d6f3a8863acecc Mon Sep 17 00:00:00 2001 From: zwelch Date: Thu, 14 May 2009 21:55:56 +0000 Subject: [PATCH] Paul Thomas : new board cfg for Linuxstamp-mx27 git-svn-id: svn://svn.berlios.de/openocd/trunk@1788 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/board/imx27lnst.cfg | 59 ++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 src/target/board/imx27lnst.cfg diff --git a/src/target/board/imx27lnst.cfg b/src/target/board/imx27lnst.cfg new file mode 100644 index 00000000..2ee7f094 --- /dev/null +++ b/src/target/board/imx27lnst.cfg @@ -0,0 +1,59 @@ +# The Linuxstamp-mx27 is board has a single IMX27 chip +# For further info see http://opencircuits.com/Linuxstamp_mx27#OpenOCD +source [find target/imx27.cfg] +$_TARGETNAME configure -event gdb-attach { reset init } +$_TARGETNAME configure -event reset-init { imx27lnst_init } + +proc imx27lnst_init { } { + # This setup puts RAM at 0xA0000000 + + # reset the board correctly + jtag_khz 500 + reset run + reset halt + + mww 0x10000000 0x20040304 + mww 0x10020000 0x00000000 + mww 0x10000004 0xDFFBFCFB + mww 0x10020004 0xFFFFFFFF + + sleep 100 + + # ======================================== + # Configure DDR on CSD0 -- initial reset + # ======================================== + mww 0xD8001010 0x00000008 + + sleep 100 + + # ======================================== + # Configure DDR on CSD0 -- wait 5000 cycle + # ======================================== + mww 0x10027828 0x55555555 + mww 0x10027830 0x55555555 + mww 0x10027834 0x55555555 + mww 0x10027838 0x00005005 + mww 0x1002783C 0x15555555 + + mww 0xD8001010 0x00000004 + + mww 0xD8001004 0x00795729 + + #mww 0xD8001000 0x92200000 + mww 0xD8001000 0x91120000 + mww 0xA0000F00 0x0 + + #mww 0xD8001000 0xA2200000 + mww 0xD8001000 0xA1120000 + mww 0xA0000F00 0x0 + mww 0xA0000F00 0x0 + + #mww 0xD8001000 0xB2200000 + mww 0xD8001000 0xB1120000 + mwb 0xA0000033 0xFF + mwb 0xA1000000 0xAA + + #mww 0xD8001000 0x82228085 + mww 0xD8001000 0x81128080 + +} -- 2.39.5