From cde28c815581d5b1086ef1e84613367ae96df085 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 26 Oct 2016 10:49:37 +0200 Subject: [PATCH] zynq: nand: Runtime detection of nand buswidth through slcr This patch adds support to check the buswidth on nand flash at runtime based on nand MIO configurations done by FSBL. User needs to correctly configure the MIO's based on the buswidth supported by the nand flash which is present on the board. Added nand8 and nand16 @periph names on slcr driver. Signed-off-by: Jagannadha Sutradharudu Teki Signed-off-by: Michal Simek --- arch/arm/mach-zynq/slcr.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 05f4099aae..2d3bf2acef 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -14,6 +14,9 @@ #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_NAND_L2_SEL 0x10 +#define SLCR_NAND_L2_SEL_MASK 0x1F + #define SLCR_USB_L1_SEL 0x04 #define SLCR_IDCODE_MASK 0x1F000 @@ -36,6 +39,14 @@ struct zynq_slcr_mio_get_status { u32 check_val; }; +static const int nand8_pins[] = { + 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 +}; + +static const int nand16_pins[] = { + 16, 17, 18, 19, 20, 21, 22, 23 +}; + static const int usb0_pins[] = { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 }; @@ -45,6 +56,20 @@ static const int usb1_pins[] = { }; static const struct zynq_slcr_mio_get_status mio_periphs[] = { + { + "nand8", + nand8_pins, + ARRAY_SIZE(nand8_pins), + SLCR_NAND_L2_SEL_MASK, + SLCR_NAND_L2_SEL, + }, + { + "nand16", + nand16_pins, + ARRAY_SIZE(nand16_pins), + SLCR_NAND_L2_SEL_MASK, + SLCR_NAND_L2_SEL, + }, { "usb0", usb0_pins, -- 2.39.5