From d11d9ef1579ed7ee58b28828a67b7e174c571fb3 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Sun, 19 Jul 2015 00:20:06 +0800 Subject: [PATCH] dm: pci: Support bridge device configuration correctly Commit aec241d "dm: pci: Use the correct hose when configuring devices" was an attempt to fix pci bridge device configuration, but unfortunately that does not work 100%. In pciauto_config_devices(), the fix tried to call pciauto_config_device() with a ctlr_hose which is supposed to be the root controller hose, however when walking through a pci topology with 2 or more pci bridges this logic simply fails. The call chain is: pciauto_config_devices()->pciauto_config_device() ->dm_pci_hose_probe_bus(). Here the call to dm_pci_hose_probe_bus() does not make any sense as the given hose is not the bridge device's hose, instead it is either the root controller's hose (case#1: if it is the 2nd pci bridge), or the bridge's parent bridge's hose (case#2: if it is the 3rd pci bridge). In both cases the logic is wrong. For example, for failing case#1 if the bridge device to config has the same devfn as one of the devices under the root controller, the call to pci_bus_find_devfn() will return the udevice of that pci device under the root controller as the bus, but this is wrong as the udevice is not a bus which does not contain all the necessary bits associated with the udevice which causes further failures. To correctly support pci bridge device configuration, we should still call pciauto_config_device() with the pci bridge's hose directly. In order to access valid pci region information, we need to refer to the root controller simply by a call to pci_bus_to_hose(0) and get the region information there in the pciauto_prescan_setup_bridge(), pciauto_postscan_setup_bridge() and pciauto_config_device(). Signed-off-by: Bin Meng --- drivers/pci/pci-uclass.c | 6 +--- drivers/pci/pci_auto.c | 66 ++++++++++++++++++++++++++++++++-------- drivers/pci/pci_common.c | 7 ++++- 3 files changed, 61 insertions(+), 18 deletions(-) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index bc0be1e9e4..c7d93f92d6 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -301,14 +301,10 @@ int pci_auto_config_devices(struct udevice *bus) for (ret = device_find_first_child(bus, &dev); !ret && dev; ret = device_find_next_child(&dev)) { - struct pci_controller *ctlr_hose; unsigned int max_bus; debug("%s: device %s\n", __func__, dev->name); - - /* The root controller has the region information */ - ctlr_hose = hose->ctlr->uclass_priv; - max_bus = pciauto_config_device(ctlr_hose, pci_get_bdf(dev)); + max_bus = pciauto_config_device(hose, pci_get_bdf(dev)); sub_bus = max(sub_bus, max_bus); } debug("%s: done\n", __func__); diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index ef6dc4facb..a7af8cb5f1 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -213,11 +213,24 @@ void pciauto_setup_device(struct pci_controller *hose, void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { - struct pci_region *pci_mem = hose->pci_mem; - struct pci_region *pci_prefetch = hose->pci_prefetch; - struct pci_region *pci_io = hose->pci_io; + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; u16 cmdstat, prefechable_64; +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE, &prefechable_64); @@ -295,9 +308,22 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose, void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { - struct pci_region *pci_mem = hose->pci_mem; - struct pci_region *pci_prefetch = hose->pci_prefetch; - struct pci_region *pci_io = hose->pci_io; + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; + +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif /* Configure bus number registers */ #ifdef CONFIG_DM_PCI @@ -425,10 +451,26 @@ void pciauto_config_init(struct pci_controller *hose) */ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) { + struct pci_region *pci_mem; + struct pci_region *pci_prefetch; + struct pci_region *pci_io; unsigned int sub_bus = PCI_BUS(dev); unsigned short class; int n; +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + struct pci_controller *ctlr_hose = pci_bus_to_hose(0); + + pci_mem = ctlr_hose->pci_mem; + pci_prefetch = ctlr_hose->pci_prefetch; + pci_io = ctlr_hose->pci_io; +#else + pci_mem = hose->pci_mem; + pci_prefetch = hose->pci_prefetch; + pci_io = hose->pci_io; +#endif + pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); switch (class) { @@ -436,8 +478,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); - pciauto_setup_device(hose, dev, 2, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 2, pci_mem, + pci_prefetch, pci_io); #ifdef CONFIG_DM_PCI n = dm_pci_hose_probe_bus(hose, dev); @@ -467,8 +509,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) * just do a minimal setup of the bridge, * let the OS take care of the rest */ - pciauto_setup_device(hose, dev, 0, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 0, pci_mem, + pci_prefetch, pci_io); DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); @@ -502,8 +544,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) DEBUGF("PCI AutoConfig: Found PowerPC device\n"); default: - pciauto_setup_device(hose, dev, 6, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 6, pci_mem, + pci_prefetch, pci_io); break; } diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c index f67c9c7b2f..07f1726748 100644 --- a/drivers/pci/pci_common.c +++ b/drivers/pci/pci_common.c @@ -224,7 +224,7 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller *hose, #ifdef CONFIG_DM_PCI /* The root controller has the region information */ - hose = hose->ctlr->uclass_priv; + hose = pci_bus_to_hose(0); #endif /* @@ -289,6 +289,11 @@ pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose, return bus_addr; } +#ifdef CONFIG_DM_PCI + /* The root controller has the region information */ + hose = pci_bus_to_hose(0); +#endif + /* * if PCI_REGION_MEM is set we do a two pass search with preference * on matches that don't have PCI_REGION_SYS_MEMORY set -- 2.39.5