From d3d844f84acf3d079959894709607188620989c5 Mon Sep 17 00:00:00 2001 From: Mateusz Kulikowski Date: Thu, 31 Mar 2016 23:12:21 +0200 Subject: [PATCH] usb: ulpi: Fix compile warning in read/write on 64-bit machines. ulpi_read and ulpi_write are used to read/write registers via ULPI bus. Code generates compilation warnings on 64-bit machines where pointer is cast to u32. This patch drops all but last 8 bits of register address. It is possible, because addresses on ULPI bus are 6- or 8-bit. It is not possible (according to ULPI 1.1 spec) to have more than 8-bit addressing. This patch should not cause regressions as all calls to ulpi_read/write use either structure pointer (@ address 0) or integer offsets cast to pointer - addresses requested are way below 8-bit range. Signed-off-by: Mateusz Kulikowski Acked-by: Marek Vasut --- drivers/usb/ulpi/ulpi-viewport.c | 5 +++-- include/usb/ulpi.h | 2 ++ 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c index 72a06de910..d111680472 100644 --- a/drivers/usb/ulpi/ulpi-viewport.c +++ b/drivers/usb/ulpi/ulpi-viewport.c @@ -92,7 +92,8 @@ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value) int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value) { - u32 val = ULPI_RWRUN | ULPI_RWCTRL | ((u32)reg << 16) | (value & 0xff); + u32 addr = (uintptr_t)reg & 0xFF; + u32 val = ULPI_RWRUN | ULPI_RWCTRL | addr << 16 | (value & 0xff); val |= (ulpi_vp->port_num & 0x7) << 24; return ulpi_request(ulpi_vp, val); @@ -101,7 +102,7 @@ int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value) u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg) { int err; - u32 val = ULPI_RWRUN | ((u32)reg << 16); + u32 val = ULPI_RWRUN | ((uintptr_t)reg & 0xFF) << 16; val |= (ulpi_vp->port_num & 0x7) << 24; err = ulpi_request(ulpi_vp, val); diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h index dfea395806..747fb0a9fd 100644 --- a/include/usb/ulpi.h +++ b/include/usb/ulpi.h @@ -123,6 +123,7 @@ int ulpi_reset(struct ulpi_viewport *ulpi_vp); /* * Write to the ULPI PHY register via the viewport. * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * Due to ULPI design, only 8 lsb of address are used. * @value - the value - only 8 lower bits are used, others ignored. * * returns 0 on success, ULPI_ERROR on failure. @@ -132,6 +133,7 @@ int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value); /* * Read the ULPI PHY register content via the viewport. * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * Due to ULPI design, only 8 lsb of address are used. * * returns register content on success, ULPI_ERROR on failure. */ -- 2.39.5