From d4e195ad1b544b0396cab4c70437371958769196 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sun, 13 Oct 2013 19:15:24 +0400 Subject: [PATCH] Remove jtag_rclk from target configs MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Some boards might have RCLK omitted from the JTAG connector and if the interface claims support for it, OpenOCD will end up trying to use RCLK while it's actually impossible. This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch. Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/1695 Tested-by: jenkins Reviewed-by: Spencer Oliver Reviewed-by: Mathias Küster --- tcl/target/altera_fpgasoc.cfg | 6 +++--- tcl/target/at91sam9.cfg | 2 +- tcl/target/at91sam9260_ext_RAM_ext_flash.cfg | 6 +++--- tcl/target/at91sam9g20.cfg | 2 +- tcl/target/imx6.cfg | 4 ++-- tcl/target/is5114.cfg | 6 +++--- tcl/target/mc13224v.cfg | 2 +- tcl/target/omap3530.cfg | 4 ++-- tcl/target/omapl138.cfg | 4 ++-- tcl/target/str912.cfg | 6 +++--- tcl/target/ti_dm355.cfg | 4 ++-- tcl/target/ti_dm365.cfg | 4 ++-- tcl/target/ti_dm6446.cfg | 4 ++-- 13 files changed, 27 insertions(+), 27 deletions(-) diff --git a/tcl/target/altera_fpgasoc.cfg b/tcl/target/altera_fpgasoc.cfg index 9c7b4196..e876031c 100644 --- a/tcl/target/altera_fpgasoc.cfg +++ b/tcl/target/altera_fpgasoc.cfg @@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME.fpga tap -irlen 10 -ircapture 0x01 -irmask 0x3 -expected- # core 1 - 0x80112000 # Slow speed to be sure it will work -jtag_rclk 1000 +adapter_khz 1000 set _TARGETNAME1 $_CHIPNAME.cpu.0 set _TARGETNAME2 $_CHIPNAME.cpu.1 @@ -45,7 +45,7 @@ set _TARGETNAME2 $_CHIPNAME.cpu.1 target create $_TARGETNAME1 cortex_a -chain-position $_CHIPNAME.dap \ -coreid 0 -dbgbase 0x80110000 -$_TARGETNAME1 configure -event reset-start { jtag_rclk 1000 } +$_TARGETNAME1 configure -event reset-start { adapter_khz 1000 } $_TARGETNAME1 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME1" $_TARGETNAME1 configure -event gdb-attach { halt } @@ -54,7 +54,7 @@ $_TARGETNAME1 configure -event gdb-attach { halt } #target create $_TARGETNAME2 cortex_a -chain-position $_CHIPNAME.dap \ # -coreid 1 -dbgbase 0x80112000 -#$_TARGETNAME2 configure -event reset-start { jtag_rclk 1000 } +#$_TARGETNAME2 configure -event reset-start { adapter_khz 1000 } #$_TARGETNAME2 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME2" #$_TARGETNAME2 configure -event gdb-attach { halt } diff --git a/tcl/target/at91sam9.cfg b/tcl/target/at91sam9.cfg index e6b297dc..f901ca81 100644 --- a/tcl/target/at91sam9.cfg +++ b/tcl/target/at91sam9.cfg @@ -27,7 +27,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP adapter_nsrst_delay 300 jtag_ntrst_delay 200 -jtag_rclk 3 +adapter_khz 3 ###################### # Target configuration diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index f7121ec9..9ab74090 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -6,7 +6,7 @@ source [find target/at91sam9261.cfg] reset_config trst_and_srst -jtag_rclk 4 +adapter_khz 4 adapter_nsrst_delay 200 jtag_ntrst_delay 200 @@ -14,7 +14,7 @@ jtag_ntrst_delay 200 scan_chain $_TARGETNAME configure -event reset-start { # at reset chip runs at 32khz - jtag_rclk 8 + adapter_khz 8 } $_TARGETNAME configure -event reset-init {at91sam_init} @@ -46,7 +46,7 @@ proc at91sam_init { } { sleep 10 ;# wait 10 ms # Now run at anything fast... ie: 10mhz! - jtag_rclk 10000 ;# Increase JTAG Speed to 6 MHz + adapter_khz 10000 ;# Increase JTAG Speed to 6 MHz mww 0xffffec00 0x0a0a0a0a ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit mww 0xffffec04 0x0b0b0b0b ;# SMC_PULSE0 diff --git a/tcl/target/at91sam9g20.cfg b/tcl/target/at91sam9g20.cfg index 8a2e69b9..3f5e3c62 100644 --- a/tcl/target/at91sam9g20.cfg +++ b/tcl/target/at91sam9g20.cfg @@ -12,7 +12,7 @@ source [find target/at91sam9.cfg] # Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock). -jtag_rclk 5 +adapter_khz 5 # Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc. The # AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000. diff --git a/tcl/target/imx6.cfg b/tcl/target/imx6.cfg index d7f0b906..622261fe 100644 --- a/tcl/target/imx6.cfg +++ b/tcl/target/imx6.cfg @@ -51,8 +51,8 @@ proc imx6_dbginit {target} { } # Slow speed to be sure it will work -jtag_rclk 1000 -$_TARGETNAME configure -event reset-start { jtag_rclk 1000 } +adapter_khz 1000 +$_TARGETNAME configure -event reset-start { adapter_khz 1000 } $_TARGETNAME configure -event reset-assert-post "imx6_dbginit $_TARGETNAME" $_TARGETNAME configure -event gdb-attach { halt } diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg index defd43c5..331625fd 100644 --- a/tcl/target/is5114.cfg +++ b/tcl/target/is5114.cfg @@ -23,7 +23,7 @@ if { [info exists CPUTAPID] } { } # jtag speed. We need to stick to 16kHz until we've finished reset. -jtag_rclk 16 +adapter_khz 16 reset_config trst_and_srst @@ -38,9 +38,9 @@ jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e -$_TARGETNAME configure -event reset-start { jtag_rclk 16 } +$_TARGETNAME configure -event reset-start { adapter_khz 16 } $_TARGETNAME configure -event reset-init { # We can increase speed now that we know the target is halted. - jtag_rclk 3000 + adapter_khz 3000 } $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1 diff --git a/tcl/target/mc13224v.cfg b/tcl/target/mc13224v.cfg index 80371255..27ac8c3b 100644 --- a/tcl/target/mc13224v.cfg +++ b/tcl/target/mc13224v.cfg @@ -35,7 +35,7 @@ reset_config srst_only jtag_ntrst_delay 200 # rclk hasn't been working well. This maybe the mc13224v or something else. -#jtag_rclk 2000 +#adapter_khz 2000 adapter_khz 2000 ###################### diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg index 0e20852c..f9dcf7cb 100644 --- a/tcl/target/omap3530.cfg +++ b/tcl/target/omap3530.cfg @@ -62,8 +62,8 @@ proc omap3_dbginit {target} { # be absolutely certain the JTAG clock will work with the worst-case # 16.8MHz/2 = 8.4MHz core clock, even before a bootloader kicks in. # OK to speed up *after* PLL and clock tree setup. -jtag_rclk 1000 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } +adapter_khz 1000 +$_TARGETNAME configure -event "reset-start" { adapter_khz 1000 } # Assume SRST is unavailable (e.g. TI-14 JTAG), so we must assert reset # ourselves using PRM_RSTCTRL. RST_GS (2) is a warm reset, like ICEpick diff --git a/tcl/target/omapl138.cfg b/tcl/target/omapl138.cfg index 9a10d530..fd9ff4c2 100644 --- a/tcl/target/omapl138.cfg +++ b/tcl/target/omapl138.cfg @@ -52,8 +52,8 @@ $_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 0x2000 # be absolutely certain the JTAG clock will work with the worst-case # CLKIN = 20 MHz (best case: 30 MHz) even when no bootloader turns # on the PLL and starts using it. OK to speed up after clock setup. -jtag_rclk 1500 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 } +adapter_khz 1500 +$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 } arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg index 599a254a..38545ac9 100644 --- a/tcl/target/str912.cfg +++ b/tcl/target/str912.cfg @@ -13,7 +13,7 @@ if { [info exists ENDIAN] } { } # jtag speed. We need to stick to 16kHz until we've finished reset. -jtag_rclk 16 +adapter_khz 16 adapter_nsrst_delay 100 jtag_ntrst_delay 100 @@ -48,11 +48,11 @@ jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BST set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e -$_TARGETNAME configure -event reset-start { jtag_rclk 16 } +$_TARGETNAME configure -event reset-start { adapter_khz 16 } $_TARGETNAME configure -event reset-init { # We can increase speed now that we know the target is halted. - #jtag_rclk 3000 + #adapter_khz 3000 # -- Enable 96K RAM # PFQBC enabled / DTCM & AHB wait-states disabled diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg index 2903e5d8..4f8f523e 100644 --- a/tcl/target/ti_dm355.cfg +++ b/tcl/target/ti_dm355.cfg @@ -98,8 +98,8 @@ $_TARGETNAME configure \ # be absolutely certain the JTAG clock will work with the worst-case # CLKIN = 24 MHz (best case: 36 MHz) even when no bootloader turns # on the PLL and starts using it. OK to speed up after clock setup. -jtag_rclk 1500 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 } +adapter_khz 1500 +$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 } arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg index a2602786..0db83dba 100644 --- a/tcl/target/ti_dm365.cfg +++ b/tcl/target/ti_dm365.cfg @@ -90,8 +90,8 @@ $_TARGETNAME configure \ # be absolutely certain the JTAG clock will work with the worst-case # CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns # on the PLL and starts using it. OK to speed up after clock setup. -jtag_rclk 1500 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 } +adapter_khz 1500 +$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 } arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg index 4f100843..fa1e6e95 100644 --- a/tcl/target/ti_dm6446.cfg +++ b/tcl/target/ti_dm6446.cfg @@ -70,8 +70,8 @@ $_TARGETNAME configure -work-area-phys 0x0000a000 -work-area-size 0x2000 # be absolutely certain the JTAG clock will work with the worst-case # CLKIN = 20 MHz (best case: 30 MHz) even when no bootloader turns # on the PLL and starts using it. OK to speed up after clock setup. -jtag_rclk 1500 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 } +adapter_khz 1500 +$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 } arm7_9 fast_memory_access enable arm7_9 dcc_downloads enable -- 2.39.2