From d611f5bcb8402637030ef1500321d603aa16c9b5 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sun, 25 Dec 2016 14:15:23 +0300 Subject: [PATCH] doc: fix underfull and overfull boxes This is needed to generate PDF user manual without typesetting artifacts. Change-Id: Ibcbd804dac2b9415459327f53f6fad0dc38fa5c6 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/3919 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- doc/openocd.texi | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 93632d4b..8c10a269 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -4163,9 +4163,9 @@ The value should normally correspond to a static mapping for the @anchor{rtostype} @item @code{-rtos} @var{rtos_type} -- enable rtos support for target, -@var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{ThreadX}| -@option{FreeRTOS}|@option{linux}|@option{ChibiOS}|@option{embKernel}|@option{mqx}| -@option{uCOS-III} +@var{rtos_type} can be one of @option{auto}, @option{eCos}, +@option{ThreadX}, @option{FreeRTOS}, @option{linux}, @option{ChibiOS}, +@option{embKernel}, @option{mqx}, @option{uCOS-III} @xref{gdbrtossupport,,RTOS Support}. @item @code{-defer-examine} -- skip target examination at initial JTAG chain @@ -4752,8 +4752,10 @@ the flash bank defined at address 0x1fc00000. Any cmds executed on the virtual banks are actually performed on the physical banks. @example flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME -flash bank vbank0 virtual 0xbfc00000 0 0 0 $_TARGETNAME $_FLASHNAME -flash bank vbank1 virtual 0x9fc00000 0 0 0 $_TARGETNAME $_FLASHNAME +flash bank vbank0 virtual 0xbfc00000 0 0 0 \ + $_TARGETNAME $_FLASHNAME +flash bank vbank1 virtual 0x9fc00000 0 0 0 \ + $_TARGETNAME $_FLASHNAME @end example @end deffn @@ -4819,8 +4821,8 @@ Since signaling between JTAG and SPI is compatible, all that is required for a proxy bitstream is to connect TDI-MOSI, TDO-MISO, TCK-CLK and activate the flash chip select when the JTAG state machine is in SHIFT-DR. Such a bitstream for several Xilinx FPGAs can be found in -@file{contrib/loaders/flash/fpga/xilinx_bscan_spi.py}. It requires migen -(@url{http://github.com/m-labs/migen}) and a Xilinx toolchain to build. +@file{contrib/loaders/flash/fpga/xilinx_bscan_spi.py}. It requires +@uref{https://github.com/m-labs/migen, migen} and a Xilinx toolchain to build. This flash bank driver requires a target on a JTAG tap and will access that tap directly. Since no support from the target is needed, the target can be a @@ -4843,7 +4845,8 @@ For the bitstreams generated from @file{xilinx_bscan_spi.py} this is the target create $_TARGETNAME testee -chain-position $_CHIPNAME.fpga set _XILINX_USER1 0x02 set _DR_LENGTH 1 -flash bank $_FLASHNAME spi 0x0 0 0 0 $_TARGETNAME $_XILINX_USER1 $_DR_LENGTH +flash bank $_FLASHNAME spi 0x0 0 0 0 \ + $_TARGETNAME $_XILINX_USER1 $_DR_LENGTH @end example @end deffn @@ -4949,7 +4952,8 @@ and the second bank starts after the first. # Flash bank 0 flash bank $_FLASHNAME ambiqmicro 0 0x00040000 0 0 $_TARGETNAME # Flash bank 1 - same size as bank0, starts after bank 0. -flash bank $_FLASHNAME ambiqmicro 0x00040000 0x00040000 0 0 $_TARGETNAME +flash bank $_FLASHNAME ambiqmicro 0x00040000 0x00040000 0 0 \ + $_TARGETNAME @end example Flash is programmed using custom entry points into the bootloader. @@ -5223,8 +5227,10 @@ with @code{x} treated as wildcard and otherwise case (and any trailing characters) ignored. @example -flash bank $@{_FLASHNAME@}0 fm4 0x00000000 0 0 0 $_TARGETNAME S6E2CCAJ0A -flash bank $@{_FLASHNAME@}1 fm4 0x00100000 0 0 0 $_TARGETNAME S6E2CCAJ0A +flash bank $@{_FLASHNAME@}0 fm4 0x00000000 0 0 0 \ + $_TARGETNAME S6E2CCAJ0A +flash bank $@{_FLASHNAME@}1 fm4 0x00100000 0 0 0 \ + $_TARGETNAME S6E2CCAJ0A @end example @emph{The current implementation is incomplete. Protection is not supported, nor is Chip Erase (only Sector Erase is implemented).} -- 2.39.5