From d8e3d420891a5563fb307871581092c57aa1191e Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Thu, 30 Nov 2017 17:44:00 +0100 Subject: [PATCH] mmc: convert most of printf() to pr_err() and pr_warn() This allows to compile out the log message by tweaking the LOGLEVEL. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini --- drivers/mmc/Kconfig | 7 ------- drivers/mmc/mmc.c | 44 ++++++++++++++++++++++---------------------- 2 files changed, 22 insertions(+), 29 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 006c9016a6..c34ab219e8 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -58,13 +58,6 @@ config MMC_VERBOSE Enable the output of more information about the card such as the operating mode. -config SPL_MMC_VERBOSE - bool "Output more information about the MMC in SPL" - default n - help - Enable the output of more information about the card such as the - operating mode. - config SPL_MMC_TINY bool "Tiny MMC framework in SPL" help diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 13979a5e81..3fb82d9002 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -251,8 +251,8 @@ int mmc_send_status(struct mmc *mmc, int timeout) if (cmd.response[0] & MMC_STATUS_MASK) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - printf("Status Error: 0x%08X\n", - cmd.response[0]); + pr_err("Status Error: 0x%08X\n", + cmd.response[0]); #endif return -ECOMM; } @@ -268,7 +268,7 @@ int mmc_send_status(struct mmc *mmc, int timeout) mmc_trace_state(mmc, &cmd); if (timeout <= 0) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - printf("Timeout waiting card ready\n"); + pr_err("Timeout waiting card ready\n"); #endif return -ETIMEDOUT; } @@ -408,7 +408,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, cmd.resp_type = MMC_RSP_R1b; if (mmc_send_cmd(mmc, &cmd, NULL)) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - printf("mmc fail to send stop cmd\n"); + pr_err("mmc fail to send stop cmd\n"); #endif return 0; } @@ -448,8 +448,8 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt, if ((start + blkcnt) > block_dev->lba) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", - start + blkcnt, block_dev->lba); + pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", + start + blkcnt, block_dev->lba); #endif return 0; } @@ -828,7 +828,7 @@ static int mmc_get_capabilities(struct mmc *mmc) return 0; if (!ext_csd) { - printf("No ext_csd found!\n"); /* this should enver happen */ + pr_err("No ext_csd found!\n"); /* this should enver happen */ return -ENOTSUPP; } @@ -946,17 +946,17 @@ int mmc_hwpart_config(struct mmc *mmc, return -EINVAL; if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) { - printf("eMMC >= 4.4 required for enhanced user data area\n"); + pr_err("eMMC >= 4.4 required for enhanced user data area\n"); return -EMEDIUMTYPE; } if (!(mmc->part_support & PART_SUPPORT)) { - printf("Card does not support partitioning\n"); + pr_err("Card does not support partitioning\n"); return -EMEDIUMTYPE; } if (!mmc->hc_wp_grp_size) { - printf("Card does not define HC WP group size\n"); + pr_err("Card does not define HC WP group size\n"); return -EMEDIUMTYPE; } @@ -964,7 +964,7 @@ int mmc_hwpart_config(struct mmc *mmc, if (conf->user.enh_size) { if (conf->user.enh_size % mmc->hc_wp_grp_size || conf->user.enh_start % mmc->hc_wp_grp_size) { - printf("User data enhanced area not HC WP group " + pr_err("User data enhanced area not HC WP group " "size aligned\n"); return -EINVAL; } @@ -983,7 +983,7 @@ int mmc_hwpart_config(struct mmc *mmc, for (pidx = 0; pidx < 4; pidx++) { if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) { - printf("GP%i partition not HC WP group size " + pr_err("GP%i partition not HC WP group size " "aligned\n", pidx+1); return -EINVAL; } @@ -995,7 +995,7 @@ int mmc_hwpart_config(struct mmc *mmc, } if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) { - printf("Card does not support enhanced attribute\n"); + pr_err("Card does not support enhanced attribute\n"); return -EMEDIUMTYPE; } @@ -1008,7 +1008,7 @@ int mmc_hwpart_config(struct mmc *mmc, (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) + ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT]; if (tot_enh_size_mult > max_enh_size_mult) { - printf("Total enhanced size exceeds maximum (%u > %u)\n", + pr_err("Total enhanced size exceeds maximum (%u > %u)\n", tot_enh_size_mult, max_enh_size_mult); return -EMEDIUMTYPE; } @@ -1042,7 +1042,7 @@ int mmc_hwpart_config(struct mmc *mmc, if (ext_csd[EXT_CSD_PARTITION_SETTING] & EXT_CSD_PARTITION_SETTING_COMPLETED) { - printf("Card already partitioned\n"); + pr_err("Card already partitioned\n"); return -EPERM; } @@ -1433,7 +1433,7 @@ static inline int bus_width(uint cap) return 4; if (cap == MMC_MODE_1BIT) return 1; - printf("invalid bus witdh capability 0x%x\n", cap); + pr_warn("invalid bus witdh capability 0x%x\n", cap); return 0; } @@ -1632,7 +1632,7 @@ static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps) if (!err) return 0; - printf("bad ssr\n"); + pr_warn("bad ssr\n"); error: /* revert to a safer bus speed */ @@ -1856,7 +1856,7 @@ error: } } - printf("unable to select a mode\n"); + pr_err("unable to select a mode\n"); return -ENOTSUPP; } @@ -2188,7 +2188,7 @@ static int mmc_startup(struct mmc *mmc) cmd.cmdarg = (mmc->dsr & 0xffff) << 16; cmd.resp_type = MMC_RSP_NONE; if (mmc_send_cmd(mmc, &cmd, NULL)) - printf("MMC: SET_DSR failed\n"); + pr_warn("MMC: SET_DSR failed\n"); } /* Select the card, and put it into Transfer Mode */ @@ -2341,7 +2341,7 @@ static void mmc_set_initial_state(struct mmc *mmc) if (err != 0) err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_180); if (err != 0) - printf("mmc: failed to set signal voltage\n"); + pr_warn("mmc: failed to set signal voltage\n"); mmc_select_mode(mmc, MMC_LEGACY); mmc_set_bus_width(mmc, 1); @@ -2490,7 +2490,7 @@ retry: if (err) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) - printf("Card did not respond to voltage select!\n"); + pr_err("Card did not respond to voltage select!\n"); #endif return -EOPNOTSUPP; } @@ -2596,7 +2596,7 @@ static int mmc_probe(bd_t *bis) uclass_foreach_dev(dev, uc) { ret = device_probe(dev); if (ret) - printf("%s - probe failed: %d\n", dev->name, ret); + pr_err("%s - probe failed: %d\n", dev->name, ret); } return 0; -- 2.39.5