From d90ba790d8ae40c39d9e359dc71df16911b7bdb3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Aug 2015 21:49:51 +0200 Subject: [PATCH] mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig, just like SYS_NAND_BUSWIDTH_16BIT this is only enabled on some SoCs using depends, to avoid double defining it for SoCs which have not yet moved to Kconfig for this. Having this in Kconfig is useful because this is something which may differ from one board to the other even when using the same SoC. Signed-off-by: Hans de Goede Acked-by: Ian Campbell Acked-by: Scott Wood --- drivers/mtd/nand/Kconfig | 9 +++++++++ include/configs/sunxi-common.h | 1 - 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c34c234cc1..9a74064c98 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -92,6 +92,15 @@ config SYS_NAND_BUSWIDTH_16BIT not available while configuring controller. So a static CONFIG_NAND_xx is needed to know the device's bus-width in advance. +# Enhance depends when converting drivers to Kconfig which use this config +config SYS_NAND_U_BOOT_OFFS + hex "Location in NAND to read U-Boot from" + default 0x8000 if NAND_SUNXI + depends on NAND_SUNXI + help + Set the offset from the start of the nand where u-boot should be + loaded from. + if SPL config SPL_NAND_DENALI diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 519c99cdaa..5c65a89c4a 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -139,7 +139,6 @@ #ifdef CONFIG_NAND_SUNXI #define CONFIG_SPL_NAND_SUPPORT 1 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000 #endif /* mmc config */ -- 2.39.5