From daebb796ff5a91f3185c7653abcb97c3a0a228f3 Mon Sep 17 00:00:00 2001 From: Patrick Bruenn Date: Tue, 16 Jan 2018 07:59:02 +0100 Subject: [PATCH] arm: imx: cx9020: move dram init into common place Move dram_init(), dram_init_banksize() and get_effective_memsize() to arch/arm/mach-imx/mx5/mx53_dram.c, where it can be reused by m53evk and mx53loco. Signed-off-by: Patrick Bruenn --- arch/arm/mach-imx/mx5/Makefile | 3 ++ arch/arm/mach-imx/mx5/mx53_dram.c | 45 ++++++++++++++++++++++++++ board/beckhoff/mx53cx9020/mx53cx9020.c | 35 -------------------- 3 files changed, 48 insertions(+), 35 deletions(-) create mode 100644 arch/arm/mach-imx/mx5/mx53_dram.c diff --git a/arch/arm/mach-imx/mx5/Makefile b/arch/arm/mach-imx/mx5/Makefile index d021842f68..368cfde98b 100644 --- a/arch/arm/mach-imx/mx5/Makefile +++ b/arch/arm/mach-imx/mx5/Makefile @@ -9,3 +9,6 @@ obj-y := soc.o clock.o obj-y += lowlevel_init.o + +# common files for mx53 dram initialization +obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o diff --git a/arch/arm/mach-imx/mx5/mx53_dram.c b/arch/arm/mach-imx/mx5/mx53_dram.c new file mode 100644 index 0000000000..7e5fc42d1f --- /dev/null +++ b/arch/arm/mach-imx/mx5/mx53_dram.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2017 Beckhoff Automation GmbH & Co. KG + * Patrick Bruenn + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +phys_size_t get_effective_memsize(void) +{ + /* + * WARNING: We must override get_effective_memsize() function here + * to report only the size of the first DRAM bank. This is to make + * U-Boot relocator place U-Boot into valid memory, that is, at the + * end of the first DRAM bank. If we did not override this function + * like so, U-Boot would be placed at the address of the first DRAM + * bank + total DRAM size - sizeof(uboot), which in the setup where + * each DRAM bank contains 512MiB of DRAM would result in placing + * U-Boot into invalid memory area close to the end of the first + * DRAM bank. + */ + return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); + gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30); + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); + + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30); + + return 0; +} diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index d8bdfc27bb..f9df3604cd 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -59,41 +59,6 @@ static const u32 CCAT_MODE_RUN = 0x0033DC8F; DECLARE_GLOBAL_DATA_PTR; -phys_size_t get_effective_memsize(void) -{ - /* - * WARNING: We must override get_effective_memsize() function here - * to report only the size of the first DRAM bank. This is to make - * U-Boot relocator place U-Boot into valid memory, that is, at the - * end of the first DRAM bank. If we did not override this function - * like so, U-Boot would be placed at the address of the first DRAM - * bank + total DRAM size - sizeof(uboot), which in the setup where - * each DRAM bank contains 512MiB of DRAM would result in placing - * U-Boot into invalid memory area close to the end of the first - * DRAM bank. - */ - return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); - gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30); - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30); - - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30); - - return 0; -} - u32 get_board_rev(void) { struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; -- 2.39.5