From dbdee4ca591a3bf19446d8ab89285835e210b378 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 5 Jul 2012 05:05:09 +0000 Subject: [PATCH] arm/km: support the 2 PCIe fpga resets The PCIe FPGAs now have to support 2 resets: one for the non traffic affecting part (PCIe) and one for the traffic affecting part. When the FPGA is not reconfigured, we only reset the PCIe part. Signed-off-by: Valentin Longchamp --- board/keymile/km_arm/fpga_config.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c index 8ac63931ec..fcc5fe6c65 100644 --- a/board/keymile/km_arm/fpga_config.c +++ b/board/keymile/km_arm/fpga_config.c @@ -99,7 +99,7 @@ static int boco_set_bits(u8 reg, u8 flags) #define FPGA_INIT_B 0x10 #define FPGA_DONE 0x20 -static int fpga_done() +static int fpga_done(void) { int ret = 0; u8 regval; @@ -206,25 +206,30 @@ int wait_for_fpga_config(void) } #define PRST1 0x4 -#define BRIDGE_RST 0x4 +#define PCIE_RST 0x10 +#define TRAFFIC_RST 0x04 int fpga_reset(void) { int ret = 0; + u8 resets; if (!check_boco2()) { /* we do not have BOCO2, this is not really used */ return 0; } - ret = boco_clear_bits(PRST1, BRIDGE_RST); + /* if we have skipped, we only want to reset the PCIe part */ + resets = skip ? PCIE_RST : PCIE_RST | TRAFFIC_RST; + + ret = boco_clear_bits(PRST1, resets); if (ret) return ret; /* small delay for the pulse */ udelay(10); - ret = boco_set_bits(PRST1, BRIDGE_RST); + ret = boco_set_bits(PRST1, resets); if (ret) return ret; -- 2.39.5