From dc8cae4df3c016cbcb6eb8a841a7a94ff36b9e0b Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sat, 29 Apr 2017 14:43:35 +0200 Subject: [PATCH] edid: Set timings flags according to edid Timing flags are never set, so they may contain garbage. Since some drivers check them, video output may be broken on those drivers. Initialize them to 0 and check for few common flags. Signed-off-by: Jernej Skrabec Reviewed-by: Simon Glass --- common/edid.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/common/edid.c b/common/edid.c index e08e420920..ab7069fdcd 100644 --- a/common/edid.c +++ b/common/edid.c @@ -85,6 +85,7 @@ static void decode_timing(u8 *buf, struct display_timing *timing) uint x_mm, y_mm; unsigned int ha, hbl, hso, hspw, hborder; unsigned int va, vbl, vso, vspw, vborder; + struct edid_detailed_timing *t = (struct edid_detailed_timing *)buf; /* Edid contains pixel clock in terms of 10KHz */ set_entry(&timing->pixelclock, (buf[0] + (buf[1] << 8)) * 10000); @@ -111,6 +112,19 @@ static void decode_timing(u8 *buf, struct display_timing *timing) set_entry(&timing->vback_porch, vbl - vso - vspw); set_entry(&timing->vsync_len, vspw); + timing->flags = 0; + if (EDID_DETAILED_TIMING_FLAG_HSYNC_POLARITY(*t)) + timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_HSYNC_LOW; + if (EDID_DETAILED_TIMING_FLAG_VSYNC_POLARITY(*t)) + timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_VSYNC_LOW; + + if (EDID_DETAILED_TIMING_FLAG_INTERLACED(*t)) + timing->flags = DISPLAY_FLAGS_INTERLACED; + debug("Detailed mode clock %u Hz, %d mm x %d mm\n" " %04x %04x %04x %04x hborder %x\n" " %04x %04x %04x %04x vborder %x\n", -- 2.39.5