From dd9145b52e13830dfac18b0ee5e7f5feb885f7a0 Mon Sep 17 00:00:00 2001 From: Rodrigo Melo Date: Thu, 27 Dec 2012 19:50:52 -0300 Subject: [PATCH] doc: opendous interface based on ft2232H It was listed in the ft2232 based cables supported. Moreover, the ft2232_channel option, which was added to support this cable, was explained. Change-Id: I82ebc7bc10d6472f96ab150e78d623a617edccd2 Signed-off-by: Rodrigo Melo Reviewed-on: http://openocd.zylin.com/1098 Tested-by: jenkins Reviewed-by: Spencer Oliver --- doc/openocd.texi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 9f3a8515..72198981 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -389,6 +389,9 @@ to be available anymore as of April 2012. @* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml} @item @b{digilent-hs1} @* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1} +@item @b{opendous} +@* Link @url{http://code.google.com/p/opendous/wiki/JTAG} FT2232H-based +(OpenHardware). @end itemize @section USB-JTAG / Altera USB-Blaster compatibles @@ -480,7 +483,7 @@ evaluation boards. This is the adapter fitted to the Stellaris LaunchPad. @* Link: @url{http://dangerousprototypes.com/bus-pirate-manual/} @item @b{opendous} -@* Link: @url{http://code.google.com/p/opendous-jtag/} +@* Link: @url{http://code.google.com/p/opendous-jtag/} - which uses an AT90USB162 @item @b{estick} @* Link: @url{http://code.google.com/p/estick-jtag/} @@ -2539,6 +2542,11 @@ also reduces the risk of timeouts before receiving the expected number of bytes. The OpenOCD default value is 2 and for some systems a value of 10 has proved useful. @end deffn +@deffn {Config Command} {ft2232_channel} channel +Used to select the channel of the ft2232 chip to use (between 1 and 4). +The default value is 1. +@end deffn + For example, the interface config file for a Turtelizer JTAG Adapter looks something like this: -- 2.39.5