From de94b80d3c8ea4d3b52c9c33d85a9a93c7c4182d Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sun, 24 Jun 2012 21:35:21 +0000 Subject: [PATCH] da850/omap-l138: Fix NAND flash timings Though Commit id a3f88293ddd13facd734769c1664d35ab4ed681f (da850evm: setup the NAND flash timings) has configured the AEMIF timings, they are not exactly in sync with the timings used in Linux. Linux is configuring the timing register as 0x08222204, where as currently it configured to 0x00100084 in U-Boot. This issue was found out when support for NAND SPL is added in U-Boot. Without this patch U-Boot does not come up with SPL. Tested-by: Christian Riesch Signed-off-by: Lad, Prabhakar Signed-off-by: Rajashekhara, Sudhakar Signed-off-by: Hadli, Manjunath --- board/davinci/da8xxevm/da850evm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 152a524959..0c7aabb134 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -348,11 +348,11 @@ int board_init(void) * NAND CS setup - cycle counts based on da850evm NAND timings in the * Linux kernel @ 25MHz EMIFA */ - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(1) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(1) | + writel((DAVINCI_ABCR_WSETUP(2) | + DAVINCI_ABCR_WSTROBE(2) | + DAVINCI_ABCR_WHOLD(1) | + DAVINCI_ABCR_RSETUP(1) | + DAVINCI_ABCR_RSTROBE(4) | DAVINCI_ABCR_RHOLD(0) | DAVINCI_ABCR_TA(1) | DAVINCI_ABCR_ASIZE_8BIT), -- 2.39.5