From e06e914d872f3bd5098d2f1120ecee1447a3f566 Mon Sep 17 00:00:00 2001 From: SRICHARAN R Date: Thu, 17 May 2012 00:12:06 +0000 Subject: [PATCH] ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections. The DMM sections can be overlapping with each other, with sections 3 to 0 having the highest to lowest priority in that order. There could also be a section that is used trap the unmapped Tiler entries and this trap section could be overlapping with the actual sdram area. So take care of the above scenarios while calculating the size of the actual ram. Signed-off-by: R Sricharan --- .../arm/cpu/armv7/omap-common/hwinit-common.c | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index cf71ab4443..660032330e 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -162,11 +162,16 @@ void watchdog_init(void) */ u32 omap_sdram_size(void) { - u32 section, i, total_size = 0, size, addr; + u32 section, i, valid; + u64 sdram_start = 0, sdram_end = 0, addr, + size, total_size = 0, trap_size = 0; for (i = 0; i < 4; i++) { section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_ADDRSPC_MASK) >> + (EMIF_SDRC_ADDRSPC_SHIFT); addr = section & EMIF_SYS_ADDR_MASK; + /* See if the address is valid */ if ((addr >= DRAM_ADDR_SPACE_START) && (addr < DRAM_ADDR_SPACE_END)) { @@ -174,9 +179,20 @@ u32 omap_sdram_size(void) EMIF_SYS_SIZE_SHIFT); size = 1 << size; size *= SZ_16M; - total_size += size; + + if (valid != DMM_SDRC_ADDR_SPC_INVALID) { + if (!sdram_start || (addr < sdram_start)) + sdram_start = addr; + if (!sdram_end || ((addr + size) > sdram_end)) + sdram_end = addr + size; + } else { + trap_size = size; + } + } + } + total_size = (sdram_end - sdram_start) - (trap_size); return total_size; } -- 2.39.5