From e32624ef820f821b94333402788e79979681eb29 Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Fri, 8 Feb 2013 07:25:30 +0000 Subject: [PATCH] Tegra: I2C: Add T114 clock support to tegra_i2c driver T114 has a slightly different I2C clock, with a new (extra) divisor in standard/fast mode and HS mode. Tested on my Dalmore, and the I2C clock is 100KHz +/- 3Hz on my Saleae Logic analyzer. Added a new entry in compat_names for T114 I2C since it differs from the previous Tegra SoCs. A flag is set when T114 I2C HW is found so new features like the extra clock divisor can be used. Signed-off-by: Tom Warren Acked-by: Laxman Dewangan --- arch/arm/include/asm/arch-tegra/tegra_i2c.h | 6 +++ drivers/i2c/tegra_i2c.c | 42 ++++++++++++++++++--- include/fdtdec.h | 1 + lib/fdtdec.c | 1 + 4 files changed, 45 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index 2650744718..853e59bb6e 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -105,6 +105,7 @@ struct i2c_ctlr { u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */ u32 reserved_2[4]; /* 40: */ struct i2c_control control; /* 50 ~ 68 */ + u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */ }; /* bit fields definitions for IO Packet Header 1 format */ @@ -154,6 +155,11 @@ struct i2c_ctlr { #define I2C_INT_ARBITRATION_LOST_SHIFT 2 #define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT) +/* I2C_CLK_DIVISOR_REGISTER */ +#define CLK_DIV_STD_FAST_MODE 0x19 +#define CLK_DIV_HS_MODE 1 +#define CLK_MULT_STD_FAST_MODE 8 + /** * Returns the bus number of the DVC controller * diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index efc77fa910..ca71cd3ee4 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -46,6 +46,7 @@ struct i2c_bus { struct i2c_control *control; struct i2c_ctlr *regs; int is_dvc; /* DVC type, rather than I2C */ + int is_scs; /* single clock source (T114+) */ int inited; /* bus is inited */ }; @@ -88,7 +89,28 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) * 16 to get the right frequency. */ clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, - i2c_bus->speed * 2 * 8); + i2c_bus->speed * 2 * 8); + + if (i2c_bus->is_scs) { + /* + * T114 I2C went to a single clock source for standard/fast and + * HS clock speeds. The new clock rate setting calculation is: + * SCL = CLK_SOURCE.I2C / + * (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) * + * I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1). + * + * NOTE: We do this here, after the initial clock/pll start, + * because if we read the clk_div reg before the controller + * is running, we hang, and we need it for the new calc. + */ + int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16; + debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__, + clk_div_stdfst_mode); + + clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, + CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) * + i2c_bus->speed * 2); + } /* Reset I2C controller. */ i2c_reset_controller(i2c_bus); @@ -352,10 +374,11 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus) * @param node_list list of nodes to process (any <=0 are ignored) * @param count number of nodes to process * @param is_dvc 1 if these are DVC ports, 0 if standard I2C + * @param is_scs 1 if this HW uses a single clock source (T114+) * @return 0 if ok, -1 on error */ static int process_nodes(const void *blob, int node_list[], int count, - int is_dvc) + int is_dvc, int is_scs) { struct i2c_bus *i2c_bus; int i; @@ -375,6 +398,8 @@ static int process_nodes(const void *blob, int node_list[], int count, return -1; } + i2c_bus->is_scs = is_scs; + i2c_bus->is_dvc = is_dvc; if (is_dvc) { i2c_bus->control = @@ -403,18 +428,25 @@ void i2c_init_board(void) const void *blob = gd->fdt_blob; int count; - /* First get the normal i2c ports */ + /* First check for newer (T114+) I2C ports */ + count = fdtdec_find_aliases_for_id(blob, "i2c", + COMPAT_NVIDIA_TEGRA114_I2C, node_list, + TEGRA_I2C_NUM_CONTROLLERS); + if (process_nodes(blob, node_list, count, 0, 1)) + return; + + /* Now get the older (T20/T30) normal I2C ports */ count = fdtdec_find_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_I2C, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 0)) + if (process_nodes(blob, node_list, count, 0, 0)) return; /* Now look for dvc ports */ count = fdtdec_add_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_DVC, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 1)) + if (process_nodes(blob, node_list, count, 1, 0)) return; } diff --git a/include/fdtdec.h b/include/fdtdec.h index 77f244f417..c7a92d553e 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -62,6 +62,7 @@ struct fdt_memory { enum fdt_compat_id { COMPAT_UNKNOWN, COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ + COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 3ae348dd30..7c7fc833a6 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; static const char * const compat_names[COMPAT_COUNT] = { COMPAT(UNKNOWN, ""), COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"), + COMPAT(NVIDIA_TEGRA114_I2C, "nvidia,tegra114-i2c"), COMPAT(NVIDIA_TEGRA20_I2C, "nvidia,tegra20-i2c"), COMPAT(NVIDIA_TEGRA20_DVC, "nvidia,tegra20-i2c-dvc"), COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), -- 2.39.5