From e34e19feb7d06c2c0baf28ed145fe8f63b166fc8 Mon Sep 17 00:00:00 2001 From: Vikas Manocha Date: Sun, 12 Feb 2017 10:25:51 -0800 Subject: [PATCH] ARM: DT: stm32f7: add pin control node for serial port pins And remove the uart pin configuration from board initialization. Signed-off-by: Vikas Manocha --- arch/arm/dts/stm32f746-disco.dts | 6 ++++++ arch/arm/dts/stm32f746.dtsi | 13 +++++++++++ board/st/stm32f746-disco/stm32f746-disco.c | 25 +--------------------- 3 files changed, 20 insertions(+), 24 deletions(-) diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts index 454b515db3..6734f234fa 100644 --- a/arch/arm/dts/stm32f746-disco.dts +++ b/arch/arm/dts/stm32f746-disco.dts @@ -70,6 +70,12 @@ clock-frequency = <25000000>; }; +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + &mac { status = "okay"; phy-mode = "rmii"; diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi index f59eca8e03..867f399340 100644 --- a/arch/arm/dts/stm32f746.dtsi +++ b/arch/arm/dts/stm32f746.dtsi @@ -104,6 +104,19 @@ ranges = <0 0x40020000 0x3000>; u-boot,dm-pre-reloc; pins-are-numbered; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = ; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; + bias-disable; + }; + }; }; }; }; diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c index ee1deb5275..9ebc36b846 100644 --- a/board/st/stm32f746-disco/stm32f746-disco.c +++ b/board/st/stm32f746-disco/stm32f746-disco.c @@ -27,14 +27,6 @@ const struct stm32_gpio_ctl gpio_ctl_gpout = { .af = STM32_GPIO_AF0 }; -const struct stm32_gpio_ctl gpio_ctl_usart = { - .mode = STM32_GPIO_MODE_AF, - .otype = STM32_GPIO_OTYPE_PP, - .speed = STM32_GPIO_SPEED_50M, - .pupd = STM32_GPIO_PUPD_UP, - .af = STM32_GPIO_AF7 -}; - const struct stm32_gpio_ctl gpio_ctl_fmc = { .mode = STM32_GPIO_MODE_AF, .otype = STM32_GPIO_OTYPE_PP, @@ -245,26 +237,11 @@ int dram_init(void) return rv; } -static const struct stm32_gpio_dsc usart_gpio[] = { - {STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */ - {STM32_GPIO_PORT_B, STM32_GPIO_PIN_7}, /* RX */ -}; - int uart_setup_gpio(void) { - int i; - int rv = 0; - clock_setup(GPIO_A_CLOCK_CFG); clock_setup(GPIO_B_CLOCK_CFG); - for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) { - rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart); - if (rv) - goto out; - } - -out: - return rv; + return 0; } #ifdef CONFIG_ETH_DESIGNWARE -- 2.39.5