From e3b327343394a7e011280a7ed88e964f6fc57a14 Mon Sep 17 00:00:00 2001 From: "Wjatscheslaw Stoljarski (Slawa)" Date: Tue, 27 Mar 2012 10:19:37 +0200 Subject: [PATCH] cfg: add imx53loco board config Add board config for iMX53QSB (loco) Change-Id: I8659dcd71a56d5fe855eaf62be0a415198b558c5 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) Reviewed-on: http://openocd.zylin.com/542 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/board/imx53loco.cfg | 311 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 tcl/board/imx53loco.cfg diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg new file mode 100644 index 00000000..d9d75f49 --- /dev/null +++ b/tcl/board/imx53loco.cfg @@ -0,0 +1,311 @@ +################################################################################## +# Author: Wjatscheslaw Stoljarski (Slawa) # +# Kiwigrid GmbH # +################################################################################## + +# The IMX53LOCO (QSB) board has a single IMX53 chip +source [find target/imx53.cfg] +# Helper for common memory read/modify/write procedures +source [find mem_helper.tcl] + +echo "iMX53 Loco board lodaded." + +# Set reset type +#reset_config srst_only + +adapter_khz 3000 + +#jtag_nsrst_delay 200 +#jtag_ntrst_delay 200 + +$_TARGETNAME configure -event "reset-assert" { + echo "Reseting ...." + #cortex_a8 dbginit +} + +$_TARGETNAME configure -event reset-init { loco_init } + +global AIPS1_BASE_ADDR +set AIPS1_BASE_ADDR 0x53F00000 +global AIPS2_BASE_ADDR +set AIPS2_BASE_ADDR 0x63F00000 + +proc loco_init { } { + echo "Reset-init..." + ; # halt the CPU + halt + + echo "HW version [format %x [mrw 0x48]]" + + dap apsel 1 + DCD + + ; # ARM errata ID #468414 + set tR [arm mrc 15 0 1 0 1] + arm mcr 15 0 1 0 1 [expr $tR | (1<<5)] ; # enable L1NEON bit + + init_l2cc + init_aips + init_clock + + dap apsel 0 + + ; # Force ARM state + ; #reg cpsr 0x000001D3 + arm core_state arm + + jtag_rclk 3000 +# adapter_khz 3000 +} + + +# L2CC Cache setup/invalidation/disable +proc init_l2cc { } { + ; #/* explicitly disable L2 cache */ + ; #mrc 15, 0, r0, c1, c0, 1 + set tR [arm mrc 15 0 1 0 1] + ; #bic r0, r0, #0x2 + ; #mcr 15, 0, r0, c1, c0, 1 + arm mcr 15 0 1 0 1 [expr $tR & ~(1<<2)] + + ; #/* reconfigure L2 cache aux control reg */ + ; #mov r0, #0xC0 /* tag RAM */ + ; #add r0, r0, #0x4 /* data RAM */ + ; #orr r0, r0, #(1 << 24) /* disable write allocate delay */ + ; #orr r0, r0, #(1 << 23) /* disable write allocate combine */ + ; #orr r0, r0, #(1 << 22) /* disable write allocate */ + + ; #mcr 15, 1, r0, c9, c0, 2 + arm mcr 15 1 9 0 2 [expr 0xC4 | (1<<24) | (1<<23) | (1<22)] +} + + +# AIPS setup - Only setup MPROTx registers. +# The PACR default values are good. +proc init_aips { } { + ; # Set all MPROTx to be non-bufferable, trusted for R/W, + ; # not forced to user-mode. + global AIPS1_BASE_ADDR + global AIPS2_BASE_ADDR + set VAL 0x77777777 + +# dap apsel 1 + mww [expr $AIPS1_BASE_ADDR + 0x0] $VAL + mww [expr $AIPS1_BASE_ADDR + 0x4] $VAL + mww [expr $AIPS2_BASE_ADDR + 0x0] $VAL + mww [expr $AIPS2_BASE_ADDR + 0x4] $VAL +# dap apsel 0 +} + + +proc init_clock { } { + global AIPS1_BASE_ADDR + global AIPS2_BASE_ADDR + set CCM_BASE_ADDR [expr $AIPS1_BASE_ADDR + 0x000D4000] + set CLKCTL_CCSR 0x0C + set CLKCTL_CBCDR 0x14 + set CLKCTL_CBCMR 0x18 + set PLL1_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00080000] + set PLL2_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00084000] + set PLL3_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x00088000] + set PLL4_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x0008C000] + set CLKCTL_CSCMR1 0x1C + set CLKCTL_CDHIPR 0x48 + set PLATFORM_BASE_ADDR [expr $AIPS2_BASE_ADDR + 0x000A0000] + set CLKCTL_CSCDR1 0x24 + set CLKCTL_CCDR 0x04 + + ; # Switch ARM to step clock + mww [expr $CCM_BASE_ADDR + $CLKCTL_CCSR] 0x4 + + return + echo "not returned" + setup_pll $PLL1_BASE_ADDR 800 + setup_pll $PLL3_BASE_ADDR 400 + + ; # Switch peripheral to PLL3 + mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCMR] 0x00015154 + mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCDR] [expr 0x02888945 | (1<<16)] + while {[mrw [expr $CCM_BASE_ADDR + $CLKCTL_CDHIPR]] != 0} { sleep 1 } + + setup_pll $PLL2_BASE_ADDR 400 + + ; # Switch peripheral to PLL2 + mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCDR] [expr 0x00808145 | (2<<10) | (9<<16) | (1<<19)] + + mww [expr $CCM_BASE_ADDR + $CLKCTL_CBCMR] 0x00016154 + + ; # change uart clk parent to pll2 + mww [expr $CCM_BASE_ADDR + $CLKCTL_CSCMR1] [expr [mrw [expr $CCM_BASE_ADDR + $CLKCTL_CSCMR1]] & 0xfcffffff | 0x01000000] + + ; # make sure change is effective + while {[mrw [expr $CCM_BASE_ADDR + $CLKCTL_CDHIPR]] != 0} { sleep 1 } + + setup_pll $PLL3_BASE_ADDR 216 + + setup_pll $PLL4_BASE_ADDR 455 + + ; # Set the platform clock dividers + mww [expr $PLATFORM_BASE_ADDR + 0x14] 0x00000124 + + mww [expr $CCM_BASE_ADDR + 0x10] 0 + + ; # Switch ARM back to PLL 1. + mww [expr $CCM_BASE_ADDR + $CLKCTL_CCSR] 0x0 + + ; # make uart div=6 + mww [expr $CCM_BASE_ADDR + $CLKCTL_CSCDR1] [expr [mrw [expr $CCM_BASE_ADDR + $CLKCTL_CSCDR1]] & 0xffffffc0 | 0x0a] + + ; # Restore the default values in the Gate registers + mww [expr $CCM_BASE_ADDR + 0x68] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x6C] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x70] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x74] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x78] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x7C] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x80] 0xFFFFFFFF + mww [expr $CCM_BASE_ADDR + 0x84] 0xFFFFFFFF + + mww [expr $CCM_BASE_ADDR + $CLKCTL_CCDR] 0x00000 + + ; # for cko - for ARM div by 8 + mww [expr $CCM_BASE_ADDR + 0x60] [expr 0x000A0000 & 0x00000F0] +} + + +proc setup_pll { PLL_ADDR CLK } { + set PLL_DP_CTL 0x00 + set PLL_DP_CONFIG 0x04 + set PLL_DP_OP 0x08 + set PLL_DP_HFS_OP 0x1C + set PLL_DP_MFD 0x0C + set PLL_DP_HFS_MFD 0x20 + set PLL_DP_MFN 0x10 + set PLL_DP_HFS_MFN 0x24 + + if {$CLK == 1000} { + set DP_OP [expr (10 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (12 - 1)] + set DP_MFN 5 + } elseif {$CLK == 850} { + set DP_OP [expr (8 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (48 - 1)] + set DP_MFN 41 + } elseif {$CLK == 800} { + set DP_OP [expr (8 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (3 - 1)] + set DP_MFN 1 + } elseif {$CLK == 700} { + set DP_OP [expr (7 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (24 - 1)] + set DP_MFN 7 + } elseif {$CLK == 600} { + set DP_OP [expr (6 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (4 - 1)] + set DP_MFN 1 + } elseif {$CLK == 665} { + set DP_OP [expr (6 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (96 - 1)] + set DP_MFN 89 + } elseif {$CLK == 532} { + set DP_OP [expr (5 << 4) + ((1 - 1) << 0)] + set DP_MFD [expr (24 - 1)] + set DP_MFN 13 + } elseif {$CLK == 455} { + set DP_OP [expr (8 << 4) + ((2 - 1) << 0)] + set DP_MFD [expr (48 - 1)] + set DP_MFN 71 + } elseif {$CLK == 400} { + set DP_OP [expr (8 << 4) + ((2 - 1) << 0)] + set DP_MFD [expr (3 - 1)] + set DP_MFN 1 + } elseif {$CLK == 216} { + set DP_OP [expr (6 << 4) + ((3 - 1) << 0)] + set DP_MFD [expr (4 - 1)] + set DP_MFN 3 + } else { + error "Error (setup_dll): clock not found!" + } + + mww [expr $PLL_ADDR + $PLL_DP_CTL] 0x00001232 + mww [expr $PLL_ADDR + $PLL_DP_CONFIG] 0x2 + + mww [expr $PLL_ADDR + $PLL_DP_OP] $DP_OP + mww [expr $PLL_ADDR + $PLL_DP_HFS_MFD] $DP_OP + + mww [expr $PLL_ADDR + $PLL_DP_MFD] $DP_MFD + mww [expr $PLL_ADDR + $PLL_DP_HFS_MFD] $DP_MFD + + mww [expr $PLL_ADDR + $PLL_DP_MFN] $DP_MFN + mww [expr $PLL_ADDR + $PLL_DP_HFS_MFN] $DP_MFN + + mww [expr $PLL_ADDR + $PLL_DP_CTL] 0x00001232 + while {[expr [mrw [expr $PLL_ADDR + $PLL_DP_CTL]] & 0x1] == 0} { sleep 1 } +} + + +proc CPU_2_BE_32 { L } { + return [expr (($L & 0x000000FF) << 24) | (($L & 0x0000FF00) << 8) | (($L & 0x00FF0000) >> 8) | (($L & 0xFF000000) >> 24)] +} + + +# Device Configuration Data +proc DCD { } { +# dap apsel 1 + mww 0x53FA8554 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3 + mww 0x53FA8558 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 + mww 0x53FA8560 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2 + mww 0x53FA8564 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT + mww 0x53FA8568 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 + mww 0x53FA8570 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 + mww 0x53FA8574 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS + mww 0x53FA8578 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 + mww 0x53FA857c 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 + mww 0x53FA8580 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 + mww 0x53FA8584 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 + mww 0x53FA8588 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS + mww 0x53FA8590 0x00300040 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 + mww 0x53FA8594 0x00300000 ;# IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 + mww 0x53FA86f0 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_ADDDS + mww 0x53FA86f4 0x00000000 ;# IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL + mww 0x53FA86fc 0x00000000 ;# IOMUXC_SW_PAD_CTL_GRP_DDRPKE + mww 0x53FA8714 0x00000000 ;# IOMUXC_SW_PAD_CTL_GRP_DDRMODE - CMOS mode + mww 0x53FA8718 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_B0DS + mww 0x53FA871c 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_B1DS + mww 0x53FA8720 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_CTLDS + mww 0x53FA8724 0x04000000 ;# IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE - DDR_SEL0= + mww 0x53FA8728 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_B2DS + mww 0x53FA872c 0x00300000 ;# IOMUXC_SW_PAD_CTL_GRP_B3DS + + # Initialize DDR2 memory + mww 0x63FD9088 0x35343535 ;# ESDCTL_RDDLCTL + mww 0x63FD9090 0x4d444c44 ;# ESDCTL_WRDLCTL + mww 0x63FD907c 0x01370138 ;# ESDCTL_DGCTRL0 + mww 0x63FD9080 0x013b013c ;# ESDCTL_DGCTRL1 + mww 0x63FD9018 0x00011740 ;# ESDCTL_ESDMISC + mww 0x63FD9000 0xc3190000 ;# ESDCTL_ESDCTL + mww 0x63FD900c 0x9f5152e3 ;# ESDCTL_ESDCFG0 + mww 0x63FD9010 0xb68e8a63 ;# ESDCTL_ESDCFG1 + mww 0x63FD9014 0x01ff00db ;# ESDCTL_ESDCFG2 + mww 0x63FD902c 0x000026d2 ;# ESDCTL_ESDRWD + mww 0x63FD9030 0x009f0e21 ;# ESDCTL_ESDOR + mww 0x63FD9008 0x12273030 ;# ESDCTL_ESDOTC + mww 0x63FD9004 0x0002002d ;# ESDCTL_ESDPDC + mww 0x63FD901c 0x00008032 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x00008033 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x00028031 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x052080b0 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x04008040 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x0000803a ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x0000803b ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x00028039 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x05208138 ;# ESDCTL_ESDSCR + mww 0x63FD901c 0x04008048 ;# ESDCTL_ESDSCR + mww 0x63FD9020 0x00005800 ;# ESDCTL_ESDREF + mww 0x63FD9040 0x04b80003 ;# ESDCTL_ZQHWCTRL + mww 0x63FD9058 0x00022227 ;# ESDCTL_ODTCTRL + mww 0x63FD901C 0x00000000 ;# ESDCTL_ESDSCR +# dap apsel 0 +} + +# vim:filetype=tcl -- 2.39.5