From e4218ebb8f7f5bf27578198e16ae5add99edeb75 Mon Sep 17 00:00:00 2001 From: oharboe Date: Fri, 31 Oct 2008 06:57:42 +0000 Subject: [PATCH] Rick Altherr switch to new syntax for target events git-svn-id: svn://svn.berlios.de/openocd/trunk@1116 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/Makefile.am | 15 ++-- src/target/event/at91r40008_reset.script | 7 -- src/target/event/at91sam9260_reset.script | 58 -------------- src/target/event/eir-sam7se512_reset.script | 87 -------------------- src/target/event/hammer_reset.script | 24 ------ src/target/event/omap5912_reset.script | 21 ----- src/target/event/pxa255_reset.script | 74 ----------------- src/target/event/sam7x256_reset.script | 23 ------ src/target/event/str710_program.script | 2 - src/target/event/str730_program.script | 1 - src/target/event/str750_program.script | 2 - src/target/event/wi-9c_reset.script | 70 ---------------- src/target/event/xba_revA3.script | 43 ---------- src/target/target/at91r40008.cfg | 10 ++- src/target/target/at91sam9260.cfg | 60 +++++++++++++- src/target/target/eir-sam7se512.cfg | 89 ++++++++++++++++++++- src/target/target/hammer.cfg | 27 ++++++- src/target/target/omap5912.cfg | 24 +++++- src/target/target/pxa255.cfg | 73 ++++++++++++++++- src/target/target/sam7x256.cfg | 19 ++++- src/target/target/str710.cfg | 6 +- src/target/target/str730.cfg | 5 +- src/target/target/str750.cfg | 6 +- src/target/target/wi-9c.cfg | 73 ++++++++++++++++- src/target/target/xba_revA3.cfg | 46 ++++++++++- 25 files changed, 433 insertions(+), 432 deletions(-) delete mode 100644 src/target/event/at91r40008_reset.script delete mode 100644 src/target/event/at91sam9260_reset.script delete mode 100644 src/target/event/eir-sam7se512_reset.script delete mode 100644 src/target/event/hammer_reset.script delete mode 100644 src/target/event/omap5912_reset.script delete mode 100644 src/target/event/pxa255_reset.script delete mode 100644 src/target/event/sam7x256_reset.script delete mode 100644 src/target/event/str710_program.script delete mode 100644 src/target/event/str730_program.script delete mode 100644 src/target/event/str750_program.script delete mode 100644 src/target/event/wi-9c_reset.script delete mode 100644 src/target/event/xba_revA3.script diff --git a/src/target/Makefile.am b/src/target/Makefile.am index 702e08d6..fc32be75 100644 --- a/src/target/Makefile.am +++ b/src/target/Makefile.am @@ -20,24 +20,23 @@ noinst_HEADERS = target.h trace.h register.h armv4_5.h embeddedice.h etm.h arm7t etm_dummy.h oocd_trace.h target_request.h trace.h arm11.h mips32.h mips_m4k.h mips_ejtag.h mips32_pracc.h mips32_dmaacc.h nobase_dist_pkglib_DATA = xscale/debug_handler.bin target/at91eb40a.cfg \ - event/at91r40008_reset.script event/sam7x256_reset.script \ target/at91r40008.cfg target/lpc2148.cfg target/lpc2148_rclk.cfg target/lpc2148_2mhz.cfg target/lpc2294.cfg \ target/sam7x256.cfg target/str710.cfg target/str912.cfg target/nslu2.cfg target/pxa255_sst.cfg \ - target/pxa255.cfg target/zy1000.cfg event/at91sam9260_reset.script target/at91sam9260.cfg \ - target/wi-9c.cfg event/wi-9c_reset.script event/pxa255_reset.script target/stm32.cfg target/xba_revA3.cfg event/xba_revA3.script \ + target/pxa255.cfg target/zy1000.cfg target/at91sam9260.cfg \ + target/wi-9c.cfg target/stm32.cfg target/xba_revA3.cfg \ ecos/at91eb40a.elf target/lm3s6965.cfg interface/parport.cfg \ - event/omap5912_reset.script interface/jtagkey-tiny.cfg interface/jtagkey.cfg interface/str9-comstick.cfg \ + interface/jtagkey-tiny.cfg interface/jtagkey.cfg interface/str9-comstick.cfg \ target/epc9301.cfg target/ipx42x.cfg target/lpc2129.cfg target/netx500.cfg \ target/omap5912.cfg target/pxa270.cfg target/str750.cfg target/str9comstick.cfg \ - target/str730.cfg target/stm32stick.cfg event/str710_program.script \ + target/str730.cfg target/stm32stick.cfg \ target/lm3s811.cfg interface/luminary.cfg interface/luminary-libftdi.cfg interface/luminary-lm3s811.cfg \ target/imx31.cfg target/lm3s3748.cfg \ interface/stm32-stick.cfg interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \ interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg \ interface/chameleon.cfg interface/at91rm9200.cfg interface/jlink.cfg interface/arm-usb-ocd.cfg \ - interface/signalyzer.cfg event/eir-sam7se512_reset.script target/eir-sam7se512.cfg \ - event/hammer_reset.script interface/flyswatter.cfg target/hammer.cfg \ - event/str730_program.script event/str750_program.script interface/olimex-jtag-tiny-a.cfg \ + interface/signalyzer.cfg target/eir-sam7se512.cfg \ + interface/flyswatter.cfg target/hammer.cfg \ + interface/olimex-jtag-tiny-a.cfg \ target/pic32mx.cfg target/aduc702x.cfg interface/dummy.cfg interface/olimex-arm-usb-ocd.cfg target/s3c2440.cfg \ interface/openocd-usb.cfg target/test_syntax_error.cfg target/test_reset_syntax_error.cfg diff --git a/src/target/event/at91r40008_reset.script b/src/target/event/at91r40008_reset.script deleted file mode 100644 index 4cda1c58..00000000 --- a/src/target/event/at91r40008_reset.script +++ /dev/null @@ -1,7 +0,0 @@ -wait_halt -sleep 10 -poll -# Ethernut 3 remapping is required to access external flash memory. -mww 0xffe00000 0x1000213d -mww 0xffe00004 0x20003e3d -mww 0xffe00020 0x00000001 diff --git a/src/target/event/at91sam9260_reset.script b/src/target/event/at91sam9260_reset.script deleted file mode 100644 index 022b4615..00000000 --- a/src/target/event/at91sam9260_reset.script +++ /dev/null @@ -1,58 +0,0 @@ -mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset -mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog - -mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator -sleep 20 # wait 20 ms -mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator -sleep 10 # wait 10 ms -mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz -sleep 20 # wait 20 ms -mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler -sleep 10 # wait 10 ms -mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected -sleep 10 # wait 10 ms - -jtag_speed 0 # Increase JTAG Speed to 6 MHz -arm7_9 dcc_downloads enable # Enable faster DCC downloads - -mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit -mww 0xffffec04 0x09070806 # SMC_PULSE0 -mww 0xffffec08 0x000d000b # SMC_CYCLE0 -mww 0xffffec0c 0x00001003 # SMC_MODE0 - -flash probe 0 # Identify flash bank 0 - -mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 -mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 - -mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM - -#mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) -mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) - -mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command -mww 0x20000000 0 -mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command -mww 0x20000000 0 -mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x4 -mww 0x20000000 0 -mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command -mww 0x20000000 0 -mww 0xffffea00 0x0 # SDRAMC_MR : normal mode -mww 0x20000000 0 -mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us - diff --git a/src/target/event/eir-sam7se512_reset.script b/src/target/event/eir-sam7se512_reset.script deleted file mode 100644 index 8a78532a..00000000 --- a/src/target/event/eir-sam7se512_reset.script +++ /dev/null @@ -1,87 +0,0 @@ -# WDT_MR, disable watchdog -mww 0xFFFFFD44 0x00008000 - -# RSTC_MR, enable user reset -mww 0xfffffd08 0xa5000001 - -# CKGR_MOR -mww 0xFFFFFC20 0x00000601 -sleep 10 - -# CKGR_PLLR -mww 0xFFFFFC2C 0x00481c0e -sleep 10 - -# PMC_MCKR -mww 0xFFFFFC30 0x00000007 -sleep 10 - -# PMC_IER -mww 0xFFFFFF60 0x00480100 - -# -# Enable SDRAM interface. -# - -# Enable SDRAM control at PIO A. -mww 0xfffff474 0x3f800000 # PIO_BSR_OFF -mww 0xfffff404 0x3f800000 # PIO_PDR_OFF - -# Enable address bus (A0, A2-A11, A13-A17) at PIO B -mww 0xfffff674 0x0003effd # PIO_BSR_OFF -mww 0xfffff604 0x0003effd # PIO_PDR_OFF - -# Enable 16 bit data bus at PIO C -mww 0xfffff870 0x0000ffff # PIO_ASR_OFF -mww 0xfffff804 0x0000ffff # PIO_PDR_OFF - -# Enable SDRAM chip select -mww 0xffffff80 0x00000002 # EBI_CSA_OFF - -# Set SDRAM characteristics in configuration register. -# Hard coded values for MT48LC32M16A2 with 48MHz CPU. -mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF -sleep 10 - -# Issue 16 bit SDRAM command: NOP -mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 - -# Issue 16 bit SDRAM command: Precharge all -mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 - -# Issue 8 auto-refresh cycles -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 -mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF -mww 0x20000000 0x00000000 - -# Issue 16 bit SDRAM command: Set mode register -mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF -mww 0x20000014 0xcafedede - -# Set refresh rate count ??? -mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF - -# Issue 16 bit SDRAM command: Normal mode -mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF -mww 0x20000000 0x00000180 - -# -# Enable external reset key. -# -mww 0xfffffd08 0xa5000001 - diff --git a/src/target/event/hammer_reset.script b/src/target/event/hammer_reset.script deleted file mode 100644 index c7e38e6c..00000000 --- a/src/target/event/hammer_reset.script +++ /dev/null @@ -1,24 +0,0 @@ -# Reset Script for the TinCanTools S3C2410 Based Hammer Module -# http://www.tincantools.com -# -# Setup primary clocks and initialize the SDRAM -mww 0x53000000 0x00000000 -mww 0x4a000008 0xffffffff -mww 0x4a00000c 0x000007ff -mww 0x4c000000 0x00ffffff -mww 0x4c000014 0x00000003 -mww 0x4c000004 0x000a1031 -mww 0x48000000 0x11111122 -mww 0x48000004 0x00000700 -mww 0x48000008 0x00000700 -mww 0x4800000c 0x00000700 -mww 0x48000010 0x00000700 -mww 0x48000014 0x00000700 -mww 0x48000018 0x00000700 -mww 0x4800001c 0x00018005 -mww 0x48000020 0x00018005 -mww 0x48000024 0x009c0459 -mww 0x48000028 0x000000b2 -mww 0x4800002c 0x00000030 -mww 0x48000030 0x00000030 -flash probe 0 diff --git a/src/target/event/omap5912_reset.script b/src/target/event/omap5912_reset.script deleted file mode 100644 index 258c6bd4..00000000 --- a/src/target/event/omap5912_reset.script +++ /dev/null @@ -1,21 +0,0 @@ -# -# halt target -# -poll -sleep 1 -halt -wait_halt -# -# disable wdt -# -mww 0xfffec808 0x000000f5 -mww 0xfffec808 0x000000a0 - -mww 0xfffeb048 0x0000aaaa -sleep 500 -mww 0xfffeb048 0x00005555 -sleep 500 -# -# detect flash -# -flash probe 0 diff --git a/src/target/event/pxa255_reset.script b/src/target/event/pxa255_reset.script deleted file mode 100644 index bc9fa822..00000000 --- a/src/target/event/pxa255_reset.script +++ /dev/null @@ -1,74 +0,0 @@ -#configuration file for PXA250 Evaluation Board -# ----------------------------------------------------- -# -xscale cp15 15 0x00002001 #Enable CP0 and CP13 access -# -# setup GPIO -# -mww 0x40E00018 0x00008000 #CPSR0 -sleep 20 -mww 0x40E0001C 0x00000002 #GPSR1 -sleep 20 -mww 0x40E00020 0x00000008 #GPSR2 -sleep 20 -mww 0x40E0000C 0x00008000 #GPDR0 -sleep 20 -mww 0x40E00054 0x80000000 #GAFR0_L -sleep 20 -mww 0x40E00058 0x00188010 #GAFR0_H -sleep 20 -mww 0x40E0005C 0x60908018 #GAFR1_L -sleep 20 -mww 0x40E0000C 0x0280E000 #GPDR0 -sleep 20 -mww 0x40E00010 0x821C88B2 #GPDR1 -sleep 20 -mww 0x40E00014 0x000F03DB #GPDR2 -sleep 20 -mww 0x40E00000 0x000F03DB #GPLR0 -sleep 20 - - -mww 0x40F00004 0x00000020 #PSSR -sleep 20 - -# -# setup memory controller -# -mww 0x48000008 0x01111998 #MSC0 -sleep 20 -mww 0x48000010 0x00047ff0 #MSC2 -sleep 20 -mww 0x48000014 0x00000000 #MECR -sleep 20 -mww 0x48000028 0x00010504 #MCMEM0 -sleep 20 -mww 0x4800002C 0x00010504 #MCMEM1 -sleep 20 -mww 0x48000030 0x00010504 #MCATT0 -sleep 20 -mww 0x48000034 0x00010504 #MCATT1 -sleep 20 -mww 0x48000038 0x00004715 #MCIO0 -sleep 20 -mww 0x4800003C 0x00004715 #MCIO1 -sleep 20 -# -mww 0x48000004 0x03CA4018 #MDREF -sleep 20 -mww 0x48000004 0x004B4018 #MDREF -sleep 20 -mww 0x48000004 0x000B4018 #MDREF -sleep 20 -mww 0x48000004 0x000BC018 #MDREF -sleep 20 -mww 0x48000000 0x00001AC8 #MDCNFG -sleep 20 - -sleep 20 - -mww 0x48000000 0x00001AC9 #MDCNFG -sleep 20 -mww 0x48000040 0x00000000 #MDMRS -sleep 20 - diff --git a/src/target/event/sam7x256_reset.script b/src/target/event/sam7x256_reset.script deleted file mode 100644 index 1612366c..00000000 --- a/src/target/event/sam7x256_reset.script +++ /dev/null @@ -1,23 +0,0 @@ -# -# Init - taken form the script openocd_at91sam7_ecr.script -# -# I take this script from the following page: -# -# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html -# -# disable watchdog -mww 0xfffffd44 0x00008000 -# enable user reset -mww 0xfffffd08 0xa5000001 -# CKGR_MOR : enable the main oscillator -mww 0xfffffc20 0x00000601 -sleep 10 -# CKGR_PLLR: 96.1097 MHz -mww 0xfffffc2c 0x00481c0e -sleep 10 -# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz -mww 0xfffffc30 0x00000007 -sleep 10 -# MC_FMR: flash mode (FWS=1,FMCN=60) -mww 0xffffff60 0x003c0100 -sleep 100 diff --git a/src/target/event/str710_program.script b/src/target/event/str710_program.script deleted file mode 100644 index e5b56f7b..00000000 --- a/src/target/event/str710_program.script +++ /dev/null @@ -1,2 +0,0 @@ -flash protect 0 0 7 off -flash protect 1 0 1 off diff --git a/src/target/event/str730_program.script b/src/target/event/str730_program.script deleted file mode 100644 index b1601b84..00000000 --- a/src/target/event/str730_program.script +++ /dev/null @@ -1 +0,0 @@ -flash protect 0 0 7 off diff --git a/src/target/event/str750_program.script b/src/target/event/str750_program.script deleted file mode 100644 index e5b56f7b..00000000 --- a/src/target/event/str750_program.script +++ /dev/null @@ -1,2 +0,0 @@ -flash protect 0 0 7 off -flash protect 1 0 1 off diff --git a/src/target/event/wi-9c_reset.script b/src/target/event/wi-9c_reset.script deleted file mode 100644 index b648106c..00000000 --- a/src/target/event/wi-9c_reset.script +++ /dev/null @@ -1,70 +0,0 @@ -mww 0x90600104 0x33313333 -mww 0xA0700000 0x00000001 # Enable the memory controller. -mww 0xA0700024 0x00000006 # Set the refresh counter 6 -mww 0xA0700028 0x00000001 # -mww 0xA0700030 0x00000001 # Set the precharge period -mww 0xA0700034 0x00000004 # Active to precharge command period is 16 clock cycles -mww 0xA070003C 0x00000001 # tAPR -mww 0xA0700040 0x00000005 # tDAL -mww 0xA0700044 0x00000001 # tWR -mww 0xA0700048 0x00000006 # tRC 32 clock cycles -mww 0xA070004C 0x00000006 # tRFC 32 clock cycles -mww 0xA0700054 0x00000001 # tRRD -mww 0xA0700058 0x00000001 # tMRD -mww 0xA0700100 0x00004280 # Dynamic Config 0 (cs4) -mww 0xA0700120 0x00004280 # Dynamic Config 1 (cs5) -mww 0xA0700140 0x00004280 # Dynamic Config 2 (cs6) -mww 0xA0700160 0x00004280 # Dynamic Config 3 (cs7) -# -mww 0xA0700104 0x00000203 # CAS latency is 2 at 100 MHz -mww 0xA0700124 0x00000203 # CAS latency is 2 at 100 MHz -mww 0xA0700144 0x00000203 # CAS latency is 2 at 100 MHz -mww 0xA0700164 0x00000203 # CAS latency is 2 at 100 MHz -# -mww 0xA0700020 0x00000103 # issue SDRAM PALL command -# -mww 0xA0700024 0x00000001 # Set the refresh counter to be as small as possible -# -# Add some dummy writes to give the SDRAM time to settle, it needs two -# AHB clock cycles, here we poke in the debugger flag, this lets -# the software know that we are in the debugger -mww 0xA0900000 0x00000002 -mww 0xA0900000 0x00000002 -mww 0xA0900000 0x00000002 -mww 0xA0900000 0x00000002 -mww 0xA0900000 0x00000002 -# -mdw 0xA0900000 -mdw 0xA0900000 -mdw 0xA0900000 -mdw 0xA0900000 -mdw 0xA0900000 -# -mww 0xA0700024 0x00000030 # Set the refresh counter to 30 -mww 0xA0700020 0x00000083 # Issue SDRAM MODE command -# -# Next we perform a read of RAM. -# mw = move word. -mdw 0x00022000 -# mw 0x00022000:P, r3 # 22000 for cas2 latency, 32000 for cas 3 -# -mww 0xA0700020 0x00000003 # issue SDRAM NORMAL command -mww 0xA0700100 0x00084280 # Enable buffer access -mww 0xA0700120 0x00084280 # Enable buffer access -mww 0xA0700140 0x00084280 # Enable buffer access -mww 0xA0700160 0x00084280 # Enable buffer access - -#Set byte lane state (static mem 1)" -mww 0xA0700220, 0x00000082 -#Flash Start -mww 0xA09001F8, 0x50000000 -#Flash Mask Reg -mww 0xA09001FC, 0xFF000001 -mww 0xA0700028, 0x00000001 - -# RAMAddr = 0x00020000 -# RAMSize = 0x00004000 - -# Set the processor mode -reg cpsr 0xd3 - diff --git a/src/target/event/xba_revA3.script b/src/target/event/xba_revA3.script deleted file mode 100644 index e58185e2..00000000 --- a/src/target/event/xba_revA3.script +++ /dev/null @@ -1,43 +0,0 @@ -#Written by: Michael Schwingen -############################################################################# -# setup expansion bus CS, disable external wdt -############################################################################# -mww 0xc4000000 0xbd113842 #CS0 : Flash, write enabled @0x50000000 -mww 0xc4000004 0x94d10013 #CS1 -mww 0xc4000008 0x95960003 #CS2 -mww 0xc400000c 0x00000000 #CS3 -mww 0xc4000010 0x80900003 #CS4 -mww 0xc4000014 0x9d520003 #CS5 -mww 0xc4000018 0x81860001 #CS6 -mww 0xc400001c 0x80900003 #CS7 - -############################################################################# -# init SDRAM controller: 16MB, one bank, CL3 -############################################################################# -mww 0xCC000000 0x2A # SDRAM_CFG: 64MBit, CL3 -mww 0xCC000004 0 # disable refresh -mww 0xCC000008 3 # NOP -sleep 100 -mww 0xCC000004 2100 # set refresh counter -mww 0xCC000008 2 # Precharge All Banks -sleep 100 -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 4 # Auto Refresh -mww 0xCC000008 1 # Mode Select CL3 - -#mww 0xc4000020 0xffffee # CFG0: remove expansion bus boot flash -#mirror at 0x00000000 - -#big endian -reg XSCALE_CTRL 0xF8 - -# -# detect flash -# -flash probe 0 diff --git a/src/target/target/at91r40008.cfg b/src/target/target/at91r40008.cfg index 6ed69576..0d323af5 100644 --- a/src/target/target/at91r40008.cfg +++ b/src/target/target/at91r40008.cfg @@ -11,7 +11,15 @@ jtag_device 4 0x1 0xf 0xe target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi -[new_target_name] configure -event old-gdb_program_config { script event/at91r40008_reset.script } +[new_target_name] configure -event gdb-flash-erase-start { + wait_halt + sleep 10 + poll + # Ethernut 3 remapping is required to access external flash memory. + mww 0xffe00000 0x1000213d + mww 0xffe00004 0x20003e3d + mww 0xffe00020 0x00000001 +} [new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg index 63d20fb7..b3e1d215 100644 --- a/src/target/target/at91sam9260.cfg +++ b/src/target/target/at91sam9260.cfg @@ -16,7 +16,65 @@ jtag_ntrst_delay 0 target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs -[new_target_name] configure -event reset-init { script event/at91sam9260_reset.script } +[new_target_name] configure -event reset-init { + mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset + mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator + sleep 10 # wait 10 ms + mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler + sleep 10 # wait 10 ms + mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected + sleep 10 # wait 10 ms + + jtag_speed 0 # Increase JTAG Speed to 6 MHz + arm7_9 dcc_downloads enable # Enable faster DCC downloads + + mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit + mww 0xffffec04 0x09070806 # SMC_PULSE0 + mww 0xffffec08 0x000d000b # SMC_CYCLE0 + mww 0xffffec0c 0x00001003 # SMC_MODE0 + + flash probe 0 # Identify flash bank 0 + + mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 + + mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM + + #mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) + + mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0x20000000 0 + mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0x20000000 0 + mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0x20000000 0 + mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0x20000000 0 + mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us +} [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 diff --git a/src/target/target/eir-sam7se512.cfg b/src/target/target/eir-sam7se512.cfg index dfc24755..bf53be1f 100644 --- a/src/target/target/eir-sam7se512.cfg +++ b/src/target/target/eir-sam7se512.cfg @@ -8,7 +8,94 @@ jtag_device 4 0x1 0xf 0xe target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi -[new_target_name] configure -event reset-init { script event/eir-sam7se512_reset.script } +[new_target_name] configure -event reset-init { + # WDT_MR, disable watchdog + mww 0xFFFFFD44 0x00008000 + + # RSTC_MR, enable user reset + mww 0xfffffd08 0xa5000001 + + # CKGR_MOR + mww 0xFFFFFC20 0x00000601 + sleep 10 + + # CKGR_PLLR + mww 0xFFFFFC2C 0x00481c0e + sleep 10 + + # PMC_MCKR + mww 0xFFFFFC30 0x00000007 + sleep 10 + + # PMC_IER + mww 0xFFFFFF60 0x00480100 + + # + # Enable SDRAM interface. + # + + # Enable SDRAM control at PIO A. + mww 0xfffff474 0x3f800000 # PIO_BSR_OFF + mww 0xfffff404 0x3f800000 # PIO_PDR_OFF + + # Enable address bus (A0, A2-A11, A13-A17) at PIO B + mww 0xfffff674 0x0003effd # PIO_BSR_OFF + mww 0xfffff604 0x0003effd # PIO_PDR_OFF + + # Enable 16 bit data bus at PIO C + mww 0xfffff870 0x0000ffff # PIO_ASR_OFF + mww 0xfffff804 0x0000ffff # PIO_PDR_OFF + + # Enable SDRAM chip select + mww 0xffffff80 0x00000002 # EBI_CSA_OFF + + # Set SDRAM characteristics in configuration register. + # Hard coded values for MT48LC32M16A2 with 48MHz CPU. + mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF + sleep 10 + + # Issue 16 bit SDRAM command: NOP + mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + + # Issue 16 bit SDRAM command: Precharge all + mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + + # Issue 8 auto-refresh cycles + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF + mww 0x20000000 0x00000000 + + # Issue 16 bit SDRAM command: Set mode register + mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF + mww 0x20000014 0xcafedede + + # Set refresh rate count ??? + mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF + + # Issue 16 bit SDRAM command: Normal mode + mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF + mww 0x20000000 0x00000180 + + # + # Enable external reset key. + # + mww 0xfffffd08 0xa5000001 +} [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 diff --git a/src/target/target/hammer.cfg b/src/target/target/hammer.cfg index b267861f..374236cd 100644 --- a/src/target/target/hammer.cfg +++ b/src/target/target/hammer.cfg @@ -11,7 +11,32 @@ jtag_device 4 0x1 0xf 0xe target create target0 arm920t -endian little -chain-position 0 -variant arm920t [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40800000 -work-area-size 0x20000 -work-area-backup 0 -[new_target_name] configure -event reset-init { script event/hammer_reset.script } +[new_target_name] configure -event reset-init { + # Reset Script for the TinCanTools S3C2410 Based Hammer Module + # http://www.tincantools.com + # + # Setup primary clocks and initialize the SDRAM + mww 0x53000000 0x00000000 + mww 0x4a000008 0xffffffff + mww 0x4a00000c 0x000007ff + mww 0x4c000000 0x00ffffff + mww 0x4c000014 0x00000003 + mww 0x4c000004 0x000a1031 + mww 0x48000000 0x11111122 + mww 0x48000004 0x00000700 + mww 0x48000008 0x00000700 + mww 0x4800000c 0x00000700 + mww 0x48000010 0x00000700 + mww 0x48000014 0x00000700 + mww 0x48000018 0x00000700 + mww 0x4800001c 0x00018005 + mww 0x48000020 0x00018005 + mww 0x48000024 0x009c0459 + mww 0x48000028 0x000000b2 + mww 0x4800002c 0x00000030 + mww 0x48000030 0x00000030 + flash probe 0 +} # speed up memory downloads arm7 fast_memory_access enable diff --git a/src/target/target/omap5912.cfg b/src/target/target/omap5912.cfg index c1e34eaa..a18f8b71 100644 --- a/src/target/target/omap5912.cfg +++ b/src/target/target/omap5912.cfg @@ -11,7 +11,29 @@ jtag_device 4 0x1 0x0 0xe jtag_device 8 0x0 0x0 0x0 target create target0 arm926ejs -endian little -chain-position 1 -variant arm926ejs -[new_target_name] configure -event reset-init { script event/omap5912_reset.script } +[new_target_name] configure -event reset-init { + # + # halt target + # + poll + sleep 1 + halt + wait_halt + # + # disable wdt + # + mww 0xfffec808 0x000000f5 + mww 0xfffec808 0x000000a0 + + mww 0xfffeb048 0x0000aaaa + sleep 500 + mww 0xfffeb048 0x00005555 + sleep 500 + # + # detect flash + # + flash probe 0 +} # omap5912 lcd frame buffer as working area [new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0 diff --git a/src/target/target/pxa255.cfg b/src/target/target/pxa255.cfg index c5a27be0..de491f6d 100644 --- a/src/target/target/pxa255.cfg +++ b/src/target/target/pxa255.cfg @@ -3,7 +3,78 @@ jtag_nsrst_delay 200 jtag_ntrst_delay 200 target create target0 xscale -endian little -chain-position 0 -variant pxa255 -[new_target_name] configure -event reset-init { script event/pxa255_reset.script } +[new_target_name] configure -event reset-init { + xscale cp15 15 0x00002001 #Enable CP0 and CP13 access + # + # setup GPIO + # + mww 0x40E00018 0x00008000 #CPSR0 + sleep 20 + mww 0x40E0001C 0x00000002 #GPSR1 + sleep 20 + mww 0x40E00020 0x00000008 #GPSR2 + sleep 20 + mww 0x40E0000C 0x00008000 #GPDR0 + sleep 20 + mww 0x40E00054 0x80000000 #GAFR0_L + sleep 20 + mww 0x40E00058 0x00188010 #GAFR0_H + sleep 20 + mww 0x40E0005C 0x60908018 #GAFR1_L + sleep 20 + mww 0x40E0000C 0x0280E000 #GPDR0 + sleep 20 + mww 0x40E00010 0x821C88B2 #GPDR1 + sleep 20 + mww 0x40E00014 0x000F03DB #GPDR2 + sleep 20 + mww 0x40E00000 0x000F03DB #GPLR0 + sleep 20 + + + mww 0x40F00004 0x00000020 #PSSR + sleep 20 + + # + # setup memory controller + # + mww 0x48000008 0x01111998 #MSC0 + sleep 20 + mww 0x48000010 0x00047ff0 #MSC2 + sleep 20 + mww 0x48000014 0x00000000 #MECR + sleep 20 + mww 0x48000028 0x00010504 #MCMEM0 + sleep 20 + mww 0x4800002C 0x00010504 #MCMEM1 + sleep 20 + mww 0x48000030 0x00010504 #MCATT0 + sleep 20 + mww 0x48000034 0x00010504 #MCATT1 + sleep 20 + mww 0x48000038 0x00004715 #MCIO0 + sleep 20 + mww 0x4800003C 0x00004715 #MCIO1 + sleep 20 + # + mww 0x48000004 0x03CA4018 #MDREF + sleep 20 + mww 0x48000004 0x004B4018 #MDREF + sleep 20 + mww 0x48000004 0x000B4018 #MDREF + sleep 20 + mww 0x48000004 0x000BC018 #MDREF + sleep 20 + mww 0x48000000 0x00001AC8 #MDCNFG + sleep 20 + + sleep 20 + + mww 0x48000000 0x00001AC9 #MDCNFG + sleep 20 + mww 0x48000040 0x00000000 #MDMRS + sleep 20 +} reset_config trst_and_srst diff --git a/src/target/target/sam7x256.cfg b/src/target/target/sam7x256.cfg index 026d4022..d7e11ff3 100644 --- a/src/target/target/sam7x256.cfg +++ b/src/target/target/sam7x256.cfg @@ -6,7 +6,24 @@ reset_config srst_only srst_pulls_trst jtag_device 4 0x1 0xf 0xe target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi -[new_target_name] configure -event reset-init { script event/sam7x256_reset.script } +[new_target_name] configure -event reset-init { + # disable watchdog + mww 0xfffffd44 0x00008000 + # enable user reset + mww 0xfffffd08 0xa5000001 + # CKGR_MOR : enable the main oscillator + mww 0xfffffc20 0x00000601 + sleep 10 + # CKGR_PLLR: 96.1097 MHz + mww 0xfffffc2c 0x00481c0e + sleep 10 + # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz + mww 0xfffffc30 0x00000007 + sleep 10 + # MC_FMR: flash mode (FWS=1,FMCN=60) + mww 0xffffff60 0x003c0100 + sleep 100 +} [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 diff --git a/src/target/target/str710.cfg b/src/target/target/str710.cfg index 3273efdd..5b10d85c 100644 --- a/src/target/target/str710.cfg +++ b/src/target/target/str710.cfg @@ -12,7 +12,11 @@ jtag_device 4 0x1 0xf 0xe target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 6000 } -[new_target_name] configure -event old-gdb_program_config { script event/str710_program.script } +[new_target_name] configure -event gdb-flash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + [new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 #flash bank str7x 0 0 diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg index b36387aa..3d504484 100644 --- a/src/target/target/str730.cfg +++ b/src/target/target/str730.cfg @@ -19,7 +19,10 @@ jtag_ntrst_delay 500 target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } -[new_target_name] configure -event old-gdb_program_config { script event/str730_program.script } +[new_target_name] configure -event gdb-¿ash-erase-start { + flash protect 0 0 7 off +} + [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank diff --git a/src/target/target/str750.cfg b/src/target/target/str750.cfg index 6c69bb39..c842d88a 100644 --- a/src/target/target/str750.cfg +++ b/src/target/target/str750.cfg @@ -20,7 +20,11 @@ target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdm [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } -[new_target_name] configure -event old-gdb_program_config { script event/str750_program.script } +[new_target_name] configure -event gdb-¿ash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + [new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank diff --git a/src/target/target/wi-9c.cfg b/src/target/target/wi-9c.cfg index 7277108e..58c8fabd 100644 --- a/src/target/target/wi-9c.cfg +++ b/src/target/target/wi-9c.cfg @@ -15,7 +15,78 @@ jtag_ntrst_delay 0 ###################### target create target0 arm926ejs -endian big -chain-position 0 -variant arm926ejs -[new_target_name] configure -event reset-init { script event/wi-9c_reset.script } +[new_target_name] configure -event reset-init { + mww 0x90600104 0x33313333 + mww 0xA0700000 0x00000001 # Enable the memory controller. + mww 0xA0700024 0x00000006 # Set the refresh counter 6 + mww 0xA0700028 0x00000001 # + mww 0xA0700030 0x00000001 # Set the precharge period + mww 0xA0700034 0x00000004 # Active to precharge command period is 16 clock cycles + mww 0xA070003C 0x00000001 # tAPR + mww 0xA0700040 0x00000005 # tDAL + mww 0xA0700044 0x00000001 # tWR + mww 0xA0700048 0x00000006 # tRC 32 clock cycles + mww 0xA070004C 0x00000006 # tRFC 32 clock cycles + mww 0xA0700054 0x00000001 # tRRD + mww 0xA0700058 0x00000001 # tMRD + mww 0xA0700100 0x00004280 # Dynamic Config 0 (cs4) + mww 0xA0700120 0x00004280 # Dynamic Config 1 (cs5) + mww 0xA0700140 0x00004280 # Dynamic Config 2 (cs6) + mww 0xA0700160 0x00004280 # Dynamic Config 3 (cs7) + # + mww 0xA0700104 0x00000203 # CAS latency is 2 at 100 MHz + mww 0xA0700124 0x00000203 # CAS latency is 2 at 100 MHz + mww 0xA0700144 0x00000203 # CAS latency is 2 at 100 MHz + mww 0xA0700164 0x00000203 # CAS latency is 2 at 100 MHz + # + mww 0xA0700020 0x00000103 # issue SDRAM PALL command + # + mww 0xA0700024 0x00000001 # Set the refresh counter to be as small as possible + # + # Add some dummy writes to give the SDRAM time to settle, it needs two + # AHB clock cycles, here we poke in the debugger flag, this lets + # the software know that we are in the debugger + mww 0xA0900000 0x00000002 + mww 0xA0900000 0x00000002 + mww 0xA0900000 0x00000002 + mww 0xA0900000 0x00000002 + mww 0xA0900000 0x00000002 + # + mdw 0xA0900000 + mdw 0xA0900000 + mdw 0xA0900000 + mdw 0xA0900000 + mdw 0xA0900000 + # + mww 0xA0700024 0x00000030 # Set the refresh counter to 30 + mww 0xA0700020 0x00000083 # Issue SDRAM MODE command + # + # Next we perform a read of RAM. + # mw = move word. + mdw 0x00022000 + # mw 0x00022000:P, r3 # 22000 for cas2 latency, 32000 for cas 3 + # + mww 0xA0700020 0x00000003 # issue SDRAM NORMAL command + mww 0xA0700100 0x00084280 # Enable buffer access + mww 0xA0700120 0x00084280 # Enable buffer access + mww 0xA0700140 0x00084280 # Enable buffer access + mww 0xA0700160 0x00084280 # Enable buffer access + + #Set byte lane state (static mem 1)" + mww 0xA0700220, 0x00000082 + #Flash Start + mww 0xA09001F8, 0x50000000 + #Flash Mask Reg + mww 0xA09001FC, 0xFF000001 + mww 0xA0700028, 0x00000001 + + # RAMAddr = 0x00020000 + # RAMSize = 0x00004000 + + # Set the processor mode + reg cpsr 0xd3 +} + [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00000000 -work-area-size 0x1000 -work-area-backup 1 ##################### diff --git a/src/target/target/xba_revA3.cfg b/src/target/target/xba_revA3.cfg index 2fd44a92..30d119a8 100644 --- a/src/target/target/xba_revA3.cfg +++ b/src/target/target/xba_revA3.cfg @@ -10,7 +10,51 @@ jtag_ntrst_delay 100 jtag_device 7 0x1 0x7f 0x7e target create target0 xscale -endian big -chain-position 0 -variant ixp42x -[new_target_name] configure -event reset-init { script event/xba_revA3.script } +[new_target_name] configure -event reset-init { + ############################################################################# + # setup expansion bus CS, disable external wdt + ############################################################################# + mww 0xc4000000 0xbd113842 #CS0 : Flash, write enabled @0x50000000 + mww 0xc4000004 0x94d10013 #CS1 + mww 0xc4000008 0x95960003 #CS2 + mww 0xc400000c 0x00000000 #CS3 + mww 0xc4000010 0x80900003 #CS4 + mww 0xc4000014 0x9d520003 #CS5 + mww 0xc4000018 0x81860001 #CS6 + mww 0xc400001c 0x80900003 #CS7 + + ############################################################################# + # init SDRAM controller: 16MB, one bank, CL3 + ############################################################################# + mww 0xCC000000 0x2A # SDRAM_CFG: 64MBit, CL3 + mww 0xCC000004 0 # disable refresh + mww 0xCC000008 3 # NOP + sleep 100 + mww 0xCC000004 2100 # set refresh counter + mww 0xCC000008 2 # Precharge All Banks + sleep 100 + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 1 # Mode Select CL3 + + #mww 0xc4000020 0xffffee # CFG0: remove expansion bus boot flash + #mirror at 0x00000000 + + #big endian + reg XSCALE_CTRL 0xF8 + + # + # detect flash + # + flash probe 0 +} + [new_target_name] configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 -- 2.39.5