From e743f1e5985818dd267d18aec6879ccebcaee078 Mon Sep 17 00:00:00 2001 From: Christopher Spinrath Date: Thu, 30 Nov 2017 22:38:40 +0100 Subject: [PATCH] ARM: imx: cm_fx6: remove esdhc init code from board file Commit 5248930ebf48 ("dm: imx: cm_fx6: Enable more driver model support") enabled driver model support for MMC. Remove the old mmc init code, which is no longer used, from the board file. Signed-off-by: Christopher Spinrath Reviewed-by: Fabio Estevam Reviewed-by: Simon Glass --- board/compulab/cm_fx6/cm_fx6.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 81438cd28c..620c3f2d0d 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -506,35 +506,6 @@ static void cm_fx6_setup_gpmi_nand(void) static void cm_fx6_setup_gpmi_nand(void) {} #endif -#ifdef CONFIG_FSL_ESDHC -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC1_BASE_ADDR}, - {USDHC2_BASE_ADDR}, - {USDHC3_BASE_ADDR}, -}; - -static enum mxc_clock usdhc_clk[3] = { - MXC_ESDHC_CLK, - MXC_ESDHC2_CLK, - MXC_ESDHC3_CLK, -}; - -int board_mmc_init(bd_t *bis) -{ - int i; - - cm_fx6_set_usdhc_iomux(); - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - usdhc_cfg[i].sdhc_clk = mxc_get_clock(usdhc_clk[i]); - usdhc_cfg[i].max_bus_width = 4; - fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - enable_usdhc_clk(1, i); - } - - return 0; -} -#endif - #ifdef CONFIG_MXC_SPI int cm_fx6_setup_ecspi(void) { -- 2.39.5