From e7d6306b238c147c59f8ba13cf870bae95ba97c0 Mon Sep 17 00:00:00 2001 From: zwelch Date: Thu, 4 Jun 2009 01:17:27 +0000 Subject: [PATCH] David Brownell : Remove pernicious whitespace from ft2232 driver; as usual, end-of-line noise, but here also much line-internal stuff. git-svn-id: svn://svn.berlios.de/openocd/trunk@2038 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/jtag/ft2232.c | 518 +++++++++++++++++++++++----------------------- 1 file changed, 259 insertions(+), 259 deletions(-) diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c index 9722988d..ae3bd863 100644 --- a/src/jtag/ft2232.c +++ b/src/jtag/ft2232.c @@ -52,7 +52,7 @@ #if (BUILD_FT2232_FTD2XX==1 && BUILD_FT2232_LIBFTDI==1) #error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive" -#elif(BUILD_FT2232_FTD2XX!=1 && BUILD_FT2232_LIBFTDI!=1) +#elif (BUILD_FT2232_FTD2XX!=1 && BUILD_FT2232_LIBFTDI!=1) #error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen" #endif @@ -101,8 +101,8 @@ static char * ft2232_device_desc_A = NULL; static char* ft2232_device_desc = NULL; static char* ft2232_serial = NULL; static char* ft2232_layout = NULL; -static u8 ft2232_latency = 2; -static unsigned ft2232_max_tck = 6000; +static u8 ft2232_latency = 2; +static unsigned ft2232_max_tck = 6000; #define MAX_USB_IDS 8 @@ -119,17 +119,17 @@ typedef struct ft2232_layout_s } ft2232_layout_t; /* init procedures for supported layouts */ -static int usbjtag_init(void); -static int jtagkey_init(void); -static int olimex_jtag_init(void); -static int flyswatter_init(void); -static int turtle_init(void); -static int comstick_init(void); -static int stm32stick_init(void); -static int axm0432_jtag_init(void); -static int sheevaplug_init(void); -static int icebear_jtag_init(void); -static int cortino_jtag_init(void); +static int usbjtag_init(void); +static int jtagkey_init(void); +static int olimex_jtag_init(void); +static int flyswatter_init(void); +static int turtle_init(void); +static int comstick_init(void); +static int stm32stick_init(void); +static int axm0432_jtag_init(void); +static int sheevaplug_init(void); +static int icebear_jtag_init(void); +static int cortino_jtag_init(void); /* reset procedures for supported layouts */ static void usbjtag_reset(int trst, int srst); @@ -177,8 +177,8 @@ static u8 high_output = 0x0; static u8 high_direction = 0x0; #if BUILD_FT2232_FTD2XX == 1 -static FT_HANDLE ftdih = NULL; -static FT_DEVICE ftdi_device = 0; +static FT_HANDLE ftdih = NULL; +static FT_DEVICE ftdi_device = 0; #elif BUILD_FT2232_LIBFTDI == 1 static struct ftdi_context ftdic; #endif @@ -213,10 +213,10 @@ static int ft2232_expect_read = 0; * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later. * @param val is the byte to send. */ -static inline void buffer_write( u8 val ) +static inline void buffer_write(u8 val) { - assert( ft2232_buffer ); - assert( (unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE ); + assert(ft2232_buffer); + assert((unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE); ft2232_buffer[ft2232_buffer_size++] = val; } @@ -226,8 +226,8 @@ static inline void buffer_write( u8 val ) */ static inline u8 buffer_read(void) { - assert( ft2232_buffer ); - assert( ft2232_read_pointer < ft2232_buffer_size ); + assert(ft2232_buffer); + assert(ft2232_read_pointer < ft2232_buffer_size); return ft2232_buffer[ft2232_read_pointer++]; } @@ -238,51 +238,51 @@ static inline u8 buffer_read(void) * Rigorous state transition logging is done here via tap_set_state(). * * @param mpsse_cmd One of the MPSSE TMS oriented commands such as - * 0x4b or 0x6b. See the MPSSE spec referenced above for their - * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)" - * is often used for this, 0x4b. + * 0x4b or 0x6b. See the MPSSE spec referenced above for their + * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)" + * is often used for this, 0x4b. * * @param tms_bits Holds the sequence of bits to send. * @param tms_count Tells how many bits in the sequence. * @param tdi_bit A single bit to pass on to TDI before the first TCK - * cycle and held static for the duration of TMS clocking. + * cycle and held static for the duration of TMS clocking. * * See the MPSSE spec referenced above. */ -static void clock_tms( u8 mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit ) +static void clock_tms(u8 mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit) { u8 tms_byte; int i; int tms_ndx; /* bit index into tms_byte */ - assert( tms_count > 0 ); + assert(tms_count > 0); -// LOG_DEBUG("mpsse cmd=%02x, tms_bits=0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count ); +// LOG_DEBUG("mpsse cmd=%02x, tms_bits=0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count); for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits>>=1) { bool bit = tms_bits & 1; - if(bit) + if (bit) tms_byte |= (1<> 8) & 0xff; /* valueH */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( retval = ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't set FT2232 TCK speed"); return retval; @@ -583,13 +583,13 @@ static void ft2232_read_scan(enum scan_type type, u8* buffer, int scan_size) buffer[cur_byte] = 0x0; - /* There is one more partial byte left from the clock data in/out instructions */ + /* There is one more partial byte left from the clock data in/out instructions */ if (bits_left > 1) { buffer[cur_byte] = buffer_read() >> 1; } /* This shift depends on the length of the clock data to tms instruction, insterted at end of the scan, now fixed to a two step transition in ft2232_add_scan */ - buffer[cur_byte] = ( buffer[cur_byte] | ( ( (buffer_read()) << 1 ) & 0x80 )) >> (8 - bits_left); + buffer[cur_byte] = (buffer[cur_byte] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left); } @@ -638,7 +638,7 @@ static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last) gettimeofday(&start, NULL); #endif - if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); return retval; @@ -657,7 +657,7 @@ static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last) gettimeofday(&inter2, NULL); #endif - if ( ( retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read) ) != ERROR_OK ) + if ((retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read)) != ERROR_OK) { LOG_ERROR("couldn't read from FT2232"); return retval; @@ -742,34 +742,34 @@ static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last) * ending with the last state at path[num_states-1] * @param num_states is the count of state steps to move through */ -static void ft2232_add_pathmove( tap_state_t* path, int num_states ) +static void ft2232_add_pathmove(tap_state_t* path, int num_states) { int tms_bits = 0; int state_ndx; tap_state_t walker = tap_get_state(); - assert( (unsigned) num_states <= 32u ); /* tms_bits only holds 32 bits */ + assert((unsigned) num_states <= 32u); /* tms_bits only holds 32 bits */ /* this loop verifies that the path is legal and logs each state in the path */ - for( state_ndx = 0; state_ndx < num_states; ++state_ndx ) + for (state_ndx = 0; state_ndx < num_states; ++state_ndx) { tap_state_t desired_next_state = path[state_ndx]; - if (tap_state_transition(walker, false) == desired_next_state ) + if (tap_state_transition(walker, false) == desired_next_state) ; /* bit within tms_bits at index state_ndx is already zero */ - else if (tap_state_transition(walker, true) == desired_next_state ) + else if (tap_state_transition(walker, true) == desired_next_state) tms_bits |= (1< %s isn't a valid TAP transition", - tap_state_name(walker), tap_state_name(desired_next_state) ); + LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", + tap_state_name(walker), tap_state_name(desired_next_state)); exit(-1); } walker = desired_next_state; } - clock_tms( 0x4b, tms_bits, num_states, 0 ); + clock_tms(0x4b, tms_bits, num_states, 0); tap_set_end_state(tap_get_state()); } @@ -782,18 +782,18 @@ static void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int s int cur_byte = 0; int last_bit; - if ( !ir_scan ) + if (!ir_scan) { if (tap_get_state() != TAP_DRSHIFT) { - move_to_state( TAP_DRSHIFT ); + move_to_state(TAP_DRSHIFT); } } else { if (tap_get_state() != TAP_IRSHIFT) { - move_to_state( TAP_IRSHIFT ); + move_to_state(TAP_IRSHIFT); } } @@ -804,34 +804,34 @@ static void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int s if (type == SCAN_IO) { /* Clock Data Bytes In and Out LSB First */ - buffer_write( 0x39 ); + buffer_write(0x39); /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ } else if (type == SCAN_OUT) { /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x19 ); + buffer_write(0x19); /* LOG_DEBUG("added TDI bytes (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x28 ); + buffer_write(0x28); /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ } thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); num_bytes -= thisrun_bytes; - buffer_write( (u8) (thisrun_bytes - 1) ); - buffer_write( (u8) ((thisrun_bytes - 1) >> 8) ); + buffer_write((u8) (thisrun_bytes - 1)); + buffer_write((u8) ((thisrun_bytes - 1) >> 8)); if (type != SCAN_IN) { /* add complete bytes */ while (thisrun_bytes-- > 0) { - buffer_write( buffer[cur_byte++] ); + buffer_write(buffer[cur_byte++]); bits_left -= 8; } } @@ -843,7 +843,7 @@ static void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int s /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) - last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1; + last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; else last_bit = 0; @@ -853,50 +853,50 @@ static void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int s if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - buffer_write( 0x3b ); + buffer_write(0x3b); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x1b ); + buffer_write(0x1b); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x2a ); + buffer_write(0x2a); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - buffer_write( bits_left - 2 ); + buffer_write(bits_left - 2); if (type != SCAN_IN) - buffer_write( buffer[cur_byte] ); + buffer_write(buffer[cur_byte]); } - if ( ( ir_scan && (tap_get_end_state() == TAP_IRSHIFT) ) - || ( !ir_scan && (tap_get_end_state() == TAP_DRSHIFT) ) ) + if (( ir_scan && (tap_get_end_state() == TAP_IRSHIFT)) + || (!ir_scan && (tap_get_end_state() == TAP_DRSHIFT))) { if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - buffer_write( 0x3b ); + buffer_write(0x3b); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x1b ); + buffer_write(0x1b); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x2a ); + buffer_write(0x2a); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - buffer_write( 0x0 ); - buffer_write( last_bit ); + buffer_write(0x0); + buffer_write(last_bit); } else { @@ -917,19 +917,19 @@ static void ft2232_add_scan(bool ir_scan, enum scan_type type, u8* buffer, int s } else { - tms_bits = tap_get_tms_path( tap_get_state(), tap_get_end_state() ); - tms_count = tap_get_tms_path_len( tap_get_state(), tap_get_end_state() ); + tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state()); + tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state()); /* Clock Data to TMS/CS Pin (no Read) */ mpsse_cmd = 0x4b; /* LOG_DEBUG("added TMS scan (no read)"); */ } - clock_tms( mpsse_cmd, tms_bits, tms_count, last_bit ); + clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit); } - + if (tap_get_state() != tap_get_end_state()) { - move_to_state( tap_get_end_state() ); + move_to_state(tap_get_end_state()); } } @@ -940,7 +940,7 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe int bits_left = scan_size; int cur_byte = 0; int last_bit; - u8* receive_buffer = malloc( CEIL(scan_size, 8) ); + u8* receive_buffer = malloc(CEIL(scan_size, 8)); u8* receive_pointer = receive_buffer; u32 bytes_written; u32 bytes_read; @@ -955,10 +955,10 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (tap_get_state() != TAP_DRSHIFT) { - move_to_state( TAP_DRSHIFT ); + move_to_state(TAP_DRSHIFT); } - if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -974,34 +974,34 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (type == SCAN_IO) { /* Clock Data Bytes In and Out LSB First */ - buffer_write( 0x39 ); + buffer_write(0x39); /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ } else if (type == SCAN_OUT) { /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x19 ); + buffer_write(0x19); /* LOG_DEBUG("added TDI bytes (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x28 ); + buffer_write(0x28); /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ } thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); thisrun_read = thisrun_bytes; num_bytes -= thisrun_bytes; - buffer_write( (u8) (thisrun_bytes - 1) ); - buffer_write( (u8) ( (thisrun_bytes - 1) >> 8 )); + buffer_write((u8) (thisrun_bytes - 1)); + buffer_write((u8) ((thisrun_bytes - 1) >> 8)); if (type != SCAN_IN) { /* add complete bytes */ while (thisrun_bytes-- > 0) { - buffer_write( buffer[cur_byte] ); + buffer_write(buffer[cur_byte]); cur_byte++; bits_left -= 8; } @@ -1011,7 +1011,7 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe bits_left -= 8 * (thisrun_bytes); } - if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -1021,7 +1021,7 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (type != SCAN_OUT) { - if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK ) + if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) { LOG_ERROR("couldn't read from FT2232"); exit(-1); @@ -1035,7 +1035,7 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) - last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1; + last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; else last_bit = 0; @@ -1045,24 +1045,24 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - buffer_write( 0x3b ); + buffer_write(0x3b); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x1b ); + buffer_write(0x1b); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x2a ); + buffer_write(0x2a); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - buffer_write( bits_left - 2 ); + buffer_write(bits_left - 2); if (type != SCAN_IN) - buffer_write( buffer[cur_byte] ); + buffer_write(buffer[cur_byte]); if (type != SCAN_OUT) thisrun_read += 2; @@ -1073,28 +1073,28 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (type == SCAN_IO) { /* Clock Data Bits In and Out LSB First */ - buffer_write( 0x3b ); + buffer_write(0x3b); /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ - buffer_write( 0x1b ); + buffer_write(0x1b); /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ - buffer_write( 0x2a ); + buffer_write(0x2a); /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } - buffer_write( 0x0 ); - buffer_write( last_bit ); + buffer_write(0x0); + buffer_write(last_bit); } else { - int tms_bits = tap_get_tms_path( tap_get_state(), tap_get_end_state() ); - int tms_count = tap_get_tms_path_len( tap_get_state(), tap_get_end_state() ); + int tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state()); + int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state()); u8 mpsse_cmd; /* move from Shift-IR/DR to end state */ @@ -1111,13 +1111,13 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe /* LOG_DEBUG("added TMS scan (no read)"); */ } - clock_tms( mpsse_cmd, tms_bits, tms_count, last_bit ); + clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit); } if (type != SCAN_OUT) thisrun_read += 1; - if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK ) + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { LOG_ERROR("couldn't write MPSSE commands to FT2232"); exit(-1); @@ -1127,7 +1127,7 @@ static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffe if (type != SCAN_OUT) { - if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK ) + if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) { LOG_ERROR("couldn't read from FT2232"); exit(-1); @@ -1146,7 +1146,7 @@ static int ft2232_predict_scan_out(int scan_size, enum scan_type type) int num_bytes = (scan_size - 1) / 8; if (tap_get_state() != TAP_DRSHIFT) - predicted_size += get_tms_buffer_requirements( tap_get_tms_path_len( tap_get_state(), TAP_DRSHIFT) ); + predicted_size += get_tms_buffer_requirements(tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT)); if (type == SCAN_IN) /* only from device to host */ { @@ -1154,7 +1154,7 @@ static int ft2232_predict_scan_out(int scan_size, enum scan_type type) predicted_size += CEIL(num_bytes, 65536) * 3; /* remaining bits - 1 (up to 7) */ - predicted_size += ( (scan_size - 1) % 8 ) ? 2 : 0; + predicted_size += ((scan_size - 1) % 8) ? 2 : 0; } else /* host to device, or bidirectional */ { @@ -1162,7 +1162,7 @@ static int ft2232_predict_scan_out(int scan_size, enum scan_type type) predicted_size += num_bytes + CEIL(num_bytes, 65536) * 3; /* remaining bits -1 (up to 7) */ - predicted_size += ( (scan_size - 1) % 8 ) ? 3 : 0; + predicted_size += ((scan_size - 1) % 8) ? 3 : 0; } return predicted_size; @@ -1179,7 +1179,7 @@ static int ft2232_predict_scan_in(int scan_size, enum scan_type type) predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0; /* remaining bits - 1 */ - predicted_size += ( (scan_size - 1) % 8 ) ? 1 : 0; + predicted_size += ((scan_size - 1) % 8) ? 1 : 0; /* last bit (from TMS scan) */ predicted_size += 1; @@ -1224,9 +1224,9 @@ static void usbjtag_reset(int trst, int srst) } /* command "set data bits low byte" */ - buffer_write( 0x80 ); - buffer_write( low_output ); - buffer_write( low_direction ); + buffer_write(0x80); + buffer_write(low_output); + buffer_write(low_direction); } @@ -1263,9 +1263,9 @@ static void jtagkey_reset(int trst, int srst) } /* command "set data bits high byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1298,9 +1298,9 @@ static void olimex_jtag_reset(int trst, int srst) } /* command "set data bits high byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1328,9 +1328,9 @@ static void axm0432_jtag_reset(int trst, int srst) } /* command "set data bits low byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1357,9 +1357,9 @@ static void flyswatter_reset(int trst, int srst) } /* command "set data bits low byte" */ - buffer_write( 0x80 ); - buffer_write( low_output ); - buffer_write( low_direction ); + buffer_write(0x80); + buffer_write(low_output); + buffer_write(low_direction); LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction); } @@ -1378,9 +1378,9 @@ static void turtle_reset(int trst, int srst) } /* command "set data bits low byte" */ - buffer_write( 0x80 ); - buffer_write( low_output ); - buffer_write( low_direction ); + buffer_write(0x80); + buffer_write(low_output); + buffer_write(low_direction); LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst, low_output, low_direction); } @@ -1406,9 +1406,9 @@ static void comstick_reset(int trst, int srst) } /* command "set data bits high byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1435,14 +1435,14 @@ static void stm32stick_reset(int trst, int srst) } /* command "set data bits low byte" */ - buffer_write( 0x80 ); - buffer_write( low_output ); - buffer_write( low_direction ); + buffer_write(0x80); + buffer_write(low_output); + buffer_write(low_direction); /* command "set data bits high byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1462,9 +1462,9 @@ static void sheevaplug_reset(int trst, int srst) high_output |= nSRSTnOE; /* command "set data bits high byte" */ - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } @@ -1484,9 +1484,9 @@ static int ft2232_execute_runtest(jtag_command_t *cmd) if (tap_get_state() != TAP_IDLE) predicted_size += 3; predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); - if ( cmd->cmd.runtest->end_state != TAP_IDLE) + if (cmd->cmd.runtest->end_state != TAP_IDLE) predicted_size += 3; - if ( tap_get_end_state() != TAP_IDLE) + if (tap_get_end_state() != TAP_IDLE) predicted_size += 3; if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { @@ -1497,7 +1497,7 @@ static int ft2232_execute_runtest(jtag_command_t *cmd) } if (tap_get_state() != TAP_IDLE) { - move_to_state( TAP_IDLE ); + move_to_state(TAP_IDLE); require_send = 1; } i = cmd->cmd.runtest->num_cycles; @@ -1506,13 +1506,13 @@ static int ft2232_execute_runtest(jtag_command_t *cmd) /* there are no state transitions in this code, so omit state tracking */ /* command "Clock Data to TMS/CS Pin (no Read)" */ - buffer_write( 0x4b ); + buffer_write(0x4b); /* scan 7 bits */ - buffer_write( (i > 7) ? 6 : (i - 1) ); + buffer_write((i > 7) ? 6 : (i - 1)); /* TMS data bits */ - buffer_write( 0x0 ); + buffer_write(0x0); tap_set_state(TAP_IDLE); i -= (i > 7) ? 7 : i; @@ -1521,14 +1521,14 @@ static int ft2232_execute_runtest(jtag_command_t *cmd) ft2232_end_state(cmd->cmd.runtest->end_state); - if ( tap_get_state() != tap_get_end_state() ) + if (tap_get_state() != tap_get_end_state()) { - move_to_state( tap_get_end_state() ); + move_to_state(tap_get_end_state()); } require_send = 1; #ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG( "runtest: %i, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name( tap_get_end_state() ) ); + LOG_DEBUG("runtest: %i, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name(tap_get_end_state())); #endif return retval; @@ -1537,8 +1537,8 @@ static int ft2232_execute_runtest(jtag_command_t *cmd) static int ft2232_execute_statemove(jtag_command_t *cmd) { - int predicted_size = 0; - int retval = ERROR_OK; + int predicted_size = 0; + int retval = ERROR_OK; DEBUG_JTAG_IO("statemove end in %i", cmd->cmd.statemove->end_state); @@ -1554,9 +1554,9 @@ static int ft2232_execute_statemove(jtag_command_t *cmd) ft2232_end_state(cmd->cmd.statemove->end_state); /* move to end state */ - if ( tap_get_state() != tap_get_end_state() ) + if (tap_get_state() != tap_get_end_state()) { - move_to_state( tap_get_end_state() ); + move_to_state(tap_get_end_state()); require_send = 1; } @@ -1565,15 +1565,15 @@ static int ft2232_execute_statemove(jtag_command_t *cmd) static int ft2232_execute_pathmove(jtag_command_t *cmd) { - int predicted_size = 0; + int predicted_size = 0; int retval = ERROR_OK; tap_state_t* path = cmd->cmd.pathmove->path; int num_states = cmd->cmd.pathmove->num_states; DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states, - tap_state_name( tap_get_state() ), - tap_state_name( path[num_states-1] ) + tap_state_name(tap_get_state()), + tap_state_name(path[num_states-1]) ); /* only send the maximum buffer size that FT2232C can handle */ @@ -1587,7 +1587,7 @@ static int ft2232_execute_pathmove(jtag_command_t *cmd) first_unsent = cmd; } - ft2232_add_pathmove( path, num_states ); + ft2232_add_pathmove(path, num_states); require_send = 1; return retval; @@ -1603,12 +1603,12 @@ static int ft2232_execute_scan(jtag_command_t *cmd) enum scan_type type = jtag_scan_type(cmd->cmd.scan); - DEBUG_JTAG_IO( "%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type ); + DEBUG_JTAG_IO("%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type); scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); predicted_size = ft2232_predict_scan_out(scan_size, type); - if ( (predicted_size + 1) > FT2232_BUFFER_SIZE ) + if ((predicted_size + 1) > FT2232_BUFFER_SIZE) { LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)"); /* unsent commands before this */ @@ -1643,8 +1643,8 @@ static int ft2232_execute_scan(jtag_command_t *cmd) if (buffer) free(buffer); #ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG( "%s scan, %i bits, end in %s", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, - tap_state_name( tap_get_end_state() ) ); + LOG_DEBUG("%s scan, %i bits, end in %s", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, + tap_state_name(tap_get_end_state())); #endif return retval; @@ -1690,7 +1690,7 @@ static int ft2232_execute_sleep(jtag_command_t *cmd) first_unsent = cmd->next; jtag_sleep(cmd->cmd.sleep->us); #ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG( "sleep %i usec while in %s", cmd->cmd.sleep->us, tap_state_name( tap_get_state() ) ); + LOG_DEBUG("sleep %i usec while in %s", cmd->cmd.sleep->us, tap_state_name(tap_get_state())); #endif return retval; @@ -1707,7 +1707,7 @@ static int ft2232_execute_stableclocks(jtag_command_t *cmd) if (ft2232_stableclocks(cmd->cmd.stableclocks->num_cycles, cmd) != ERROR_OK) retval = ERROR_JTAG_QUEUE_FAILED; #ifdef _DEBUG_JTAG_IO_ - LOG_DEBUG( "clocks %i while in %s", cmd->cmd.stableclocks->num_cycles, tap_state_name( tap_get_state() ) ); + LOG_DEBUG("clocks %i while in %s", cmd->cmd.stableclocks->num_cycles, tap_state_name(tap_get_state())); #endif return retval; @@ -1720,13 +1720,13 @@ static int ft2232_execute_command(jtag_command_t *cmd) switch (cmd->type) { - case JTAG_RESET: retval = ft2232_execute_reset(cmd); break; - case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break; - case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break; - case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break; - case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break; - case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break; - case JTAG_STABLECLOCKS: retval = ft2232_execute_stableclocks(cmd); break; + case JTAG_RESET: retval = ft2232_execute_reset(cmd); break; + case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break; + case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break; + case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break; + case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break; + case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break; + case JTAG_STABLECLOCKS: retval = ft2232_execute_stableclocks(cmd); break; default: LOG_ERROR("BUG: unknown JTAG command type encountered"); exit(-1); @@ -1779,19 +1779,19 @@ static int ft2232_execute_queue() #if BUILD_FT2232_FTD2XX == 1 static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) { - FT_STATUS status; + FT_STATUS status; DWORD deviceID; char SerialNumber[16]; - char Description[64]; - DWORD openex_flags = 0; - char* openex_string = NULL; - u8 latency_timer; + char Description[64]; + DWORD openex_flags = 0; + char* openex_string = NULL; + u8 latency_timer; LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)", ft2232_layout, vid, pid); #if IS_WIN32 == 0 /* Add non-standard Vid/Pid to the linux driver */ - if ( ( status = FT_SetVIDPID(vid, pid) ) != FT_OK ) + if ((status = FT_SetVIDPID(vid, pid)) != FT_OK) { LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid); } @@ -1822,27 +1822,27 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) } status = FT_OpenEx(openex_string, openex_flags, &ftdih); - if( status != FT_OK ){ + if (status != FT_OK) { // under Win32, the FTD2XX driver appends an "A" to the end // of the description, if we tried by the desc, then // try by the alternate "A" description. - if( openex_string == ft2232_device_desc ){ + if (openex_string == ft2232_device_desc) { // Try the alternate method. openex_string = ft2232_device_desc_A; status = FT_OpenEx(openex_string, openex_flags, &ftdih); - if( status == FT_OK ){ + if (status == FT_OK) { // yea, the "alternate" method worked! } else { // drat, give the user a meaningfull message. // telling the use we tried *BOTH* methods. LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n", ft2232_device_desc, - ft2232_device_desc_A ); + ft2232_device_desc_A); } } } - if ( status != FT_OK ) + if (status != FT_OK) { DWORD num_devices; @@ -1856,7 +1856,7 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY); if (status == FT_OK) { - char** desc_array = malloc( sizeof(char*) * (num_devices + 1) ); + char** desc_array = malloc(sizeof(char*) * (num_devices + 1)); u32 i; for (i = 0; i < num_devices; i++) @@ -1885,13 +1885,13 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) return ERROR_JTAG_INIT_FAILED; } - if ( ( status = FT_SetLatencyTimer(ftdih, ft2232_latency) ) != FT_OK ) + if ((status = FT_SetLatencyTimer(ftdih, ft2232_latency)) != FT_OK) { LOG_ERROR("unable to set latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; } - if ( ( status = FT_GetLatencyTimer(ftdih, &latency_timer) ) != FT_OK ) + if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK) { LOG_ERROR("unable to get latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -1901,19 +1901,19 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more) LOG_DEBUG("current latency timer: %i", latency_timer); } - if ( ( status = FT_SetTimeouts(ftdih, 5000, 5000) ) != FT_OK ) + if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK) { LOG_ERROR("unable to set timeouts: %lu", status); return ERROR_JTAG_INIT_FAILED; } - if ( ( status = FT_SetBitMode(ftdih, 0x0b, 2) ) != FT_OK ) + if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK) { LOG_ERROR("unable to enable bit i/o mode: %lu", status); return ERROR_JTAG_INIT_FAILED; } - if ( ( status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID, SerialNumber, Description, NULL) ) != FT_OK ) + if ((status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID, SerialNumber, Description, NULL)) != FT_OK) { LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -1942,7 +1942,7 @@ static int ft2232_purge_ftd2xx(void) { FT_STATUS status; - if ( ( status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX) ) != FT_OK ) + if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) { LOG_ERROR("error purging ftd2xx device: %lu", status); return ERROR_JTAG_INIT_FAILED; @@ -2036,15 +2036,15 @@ static int ft2232_init(void) int i; if (tap_get_tms_path_len(TAP_IRPAUSE,TAP_IRPAUSE)==7) - { + { LOG_DEBUG("ft2232 interface using 7 step jtag state transitions"); } else { LOG_DEBUG("ft2232 interface using shortest path jtag state transitions"); - + } - if ( (ft2232_layout == NULL) || (ft2232_layout[0] == 0) ) + if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0)) { ft2232_layout = "usbjtag"; LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'"); @@ -2102,7 +2102,7 @@ static int ft2232_init(void) ft2232_speed(jtag_speed); buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */ - if ( ( ( retval = ft2232_write(buf, 1, &bytes_written) ) != ERROR_OK ) || (bytes_written != 1) ) + if (((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK) || (bytes_written != 1)) { LOG_ERROR("couldn't write to FT2232 to disable loopback"); return ERROR_JTAG_INIT_FAILED; @@ -2183,7 +2183,7 @@ static int usbjtag_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2207,7 +2207,7 @@ static int axm0432_jtag_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2253,7 +2253,7 @@ static int axm0432_jtag_init(void) buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2277,7 +2277,7 @@ static int jtagkey_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2290,8 +2290,8 @@ static int jtagkey_init(void) nSRST = 0x02; nSRSTnOE = 0x08; } - else if ( (strcmp(layout->name, "jtagkey_prototype_v1") == 0) - || (strcmp(layout->name, "oocdlink") == 0) ) + else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0) + || (strcmp(layout->name, "oocdlink") == 0)) { nTRST = 0x02; nTRSTnOE = 0x1; @@ -2335,7 +2335,7 @@ static int jtagkey_init(void) buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2359,7 +2359,7 @@ static int olimex_jtag_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2426,7 +2426,7 @@ static int flyswatter_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2449,7 +2449,7 @@ static int flyswatter_init(void) buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2473,7 +2473,7 @@ static int turtle_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2490,7 +2490,7 @@ static int turtle_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2514,7 +2514,7 @@ static int comstick_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2534,7 +2534,7 @@ static int comstick_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2558,7 +2558,7 @@ static int stm32stick_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2578,7 +2578,7 @@ static int stm32stick_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2639,7 +2639,7 @@ static int sheevaplug_init(void) return ERROR_OK; } -static int cortino_jtag_init(void) +static int cortino_jtag_init(void) { u8 buf[3]; u32 bytes_written; @@ -2653,7 +2653,7 @@ static int cortino_jtag_init(void) buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2673,7 +2673,7 @@ static int cortino_jtag_init(void) buf[2] = high_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); return ERROR_JTAG_INIT_FAILED; @@ -2698,9 +2698,9 @@ static void olimex_jtag_blink(void) high_output |= 0x08; } - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); } @@ -2711,9 +2711,9 @@ static void flyswatter_jtag_blink(void) */ high_output ^= 0x0c; - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); } @@ -2731,9 +2731,9 @@ static void turtle_jtag_blink(void) high_output = 0x08; } - buffer_write( 0x82 ); - buffer_write( high_output ); - buffer_write( high_direction ); + buffer_write(0x82); + buffer_write(high_output); + buffer_write(high_direction); } @@ -2763,23 +2763,23 @@ static int ft2232_handle_device_desc_command(struct command_context_s* cmd_ctx, if (argc == 1) { ft2232_device_desc = strdup(args[0]); - cp = strchr( ft2232_device_desc, 0 ); + cp = strchr(ft2232_device_desc, 0); // under Win32, the FTD2XX driver appends an "A" to the end // of the description, this examines the given desc // and creates the 'missing' _A or non_A variable. - if( (cp[-1] == 'A') && (cp[-2]==' ') ){ + if ((cp[-1] == 'A') && (cp[-2]==' ')) { // it was, so make this the "A" version. ft2232_device_desc_A = ft2232_device_desc; // and *CREATE* the non-A version. - strcpy( buf, ft2232_device_desc ); - cp = strchr( buf, 0 ); + strcpy(buf, ft2232_device_desc); + cp = strchr(buf, 0); cp[-2] = 0; - ft2232_device_desc = strdup( buf ); + ft2232_device_desc = strdup(buf); } else { // A not defined // so create it - sprintf( buf, "%s A", ft2232_device_desc ); - ft2232_device_desc_A = strdup( buf ); + sprintf(buf, "%s A", ft2232_device_desc); + ft2232_device_desc_A = strdup(buf); } } else @@ -2828,7 +2828,7 @@ static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char "(maximum is %d pairs)", MAX_USB_IDS); argc = MAX_USB_IDS * 2; } - if ( argc < 2 || (argc & 1) ) + if (argc < 2 || (argc & 1)) { LOG_WARNING("incomplete ft2232_vid_pid configuration directive"); if (argc < 2) @@ -2892,13 +2892,13 @@ static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd) /* there are no state transitions in this code, so omit state tracking */ /* command "Clock Data to TMS/CS Pin (no Read)" */ - buffer_write( 0x4b ); + buffer_write(0x4b); /* scan 7 bit */ - buffer_write( bitcount_per_command - 1 ); + buffer_write(bitcount_per_command - 1); /* TMS data bits are either all zeros or ones to stay in the current stable state */ - buffer_write( tms ); + buffer_write(tms); require_send = 1; @@ -2911,7 +2911,7 @@ static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd) /* --------------------------------------------------------------------- * Support for IceBear JTAG adapter from Section5: - * http://section5.ch/icebear + * http://section5.ch/icebear * * Author: Sten, debian@sansys-electronic.com */ @@ -2961,7 +2961,7 @@ static int icebear_jtag_init(void) { buf[2] = low_direction; LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)"); return ERROR_JTAG_INIT_FAILED; } @@ -2976,7 +2976,7 @@ static int icebear_jtag_init(void) { buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) { + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)"); return ERROR_JTAG_INIT_FAILED; } @@ -3005,9 +3005,9 @@ static void icebear_jtag_reset(int trst, int srst) { } /* command "set data bits low byte" */ - buffer_write( 0x80 ); - buffer_write( low_output ); - buffer_write( low_direction ); + buffer_write(0x80); + buffer_write(low_output); + buffer_write(low_direction); LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction); } -- 2.39.5