From e8548f820e9c806286d33cb1fa561d585fe6ace8 Mon Sep 17 00:00:00 2001 From: Markus Niebel Date: Fri, 3 Feb 2017 16:25:00 +0100 Subject: [PATCH] imx6: tqma6: disable spi CS unused in U-Boot Since the CS are not in use, do not map them. User of starterkit mainboard is free to use them otherwise. When using these pins later in the OS for instance as GPIO IRQ pin, they need to be input. Signed-off-by: Markus Niebel --- board/tqc/tqma6/tqma6_mba6.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c index af92967392..02705bef69 100644 --- a/board/tqc/tqma6/tqma6_mba6.c +++ b/board/tqc/tqma6/tqma6_mba6.c @@ -234,27 +234,6 @@ static void mba6_setup_i2c(void) printf("setup I2C1 failed: %d\n", ret); } - -static iomux_v3_cfg_t const mba6_ecspi1_pads[] = { - NEW_PAD_CTRL(MX6_PAD_EIM_D24__GPIO3_IO24, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_EIM_D25__GPIO3_IO25, SPI_PAD_CTRL), -}; - -static unsigned const mba6_ecspi1_cs[] = { - IMX_GPIO_NR(3, 24), - IMX_GPIO_NR(3, 25), -}; - -static void mba6_setup_iomuxc_spi(void) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(mba6_ecspi1_cs); ++i) - gpio_direction_output(mba6_ecspi1_cs[i], 1); - imx_iomux_v3_setup_multiple_pads(mba6_ecspi1_pads, - ARRAY_SIZE(mba6_ecspi1_pads)); -} - int board_phy_config(struct phy_device *phydev) { /* @@ -341,7 +320,6 @@ int tqma6_bb_board_early_init_f(void) int tqma6_bb_board_init(void) { mba6_setup_i2c(); - mba6_setup_iomuxc_spi(); /* do it here - to have reset completed */ mba6_setup_iomuxc_enet(); -- 2.39.5