From e8adca9ecf495a262456be25efaba3c5b6f16167 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 13 Sep 2016 10:46:01 -0600 Subject: [PATCH] mmc: tegra: only use new clock/reset APIs Now that the standard clock/reset APIs are available for all Tegra SoCs, convert the MMC driver to use them exclusively, and remove any references to the custom Tegra-specific APIs. Cc: Jaehoon Chung Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- drivers/mmc/tegra_mmc.c | 45 +++++------------------------------------ 1 file changed, 5 insertions(+), 40 deletions(-) diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 7b9628adb9..97b1154595 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -13,32 +13,15 @@ #include #include #include -#ifndef CONFIG_TEGRA186 -#include -#include -#endif #include #include -/* - * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that - * should not be present. These are needed because newer Tegra SoCs support - * only the standard clock/reset APIs, whereas older Tegra SoCs support only - * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be - * fixed to implement the standard APIs, and all drivers converted to solely - * use the new standard APIs, with no ifdefs. - */ - DECLARE_GLOBAL_DATA_PTR; struct tegra_mmc_priv { struct tegra_mmc *reg; -#ifdef CONFIG_TEGRA186 struct reset_ctl reset_ctl; struct clk clk; -#else - enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ -#endif struct gpio_desc cd_gpio; /* Change Detect GPIO */ struct gpio_desc pwr_gpio; /* Power GPIO */ struct gpio_desc wp_gpio; /* Write Protect GPIO */ @@ -373,6 +356,7 @@ static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock) { + ulong rate; int div; unsigned short clk; unsigned long timeout; @@ -384,15 +368,9 @@ static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock) */ if (clock == 0) goto out; -#ifdef CONFIG_TEGRA186 - { - ulong rate = clk_set_rate(&priv->clk, clock); - div = (rate + clock - 1) / clock; - } -#else - clock_adjust_periph_pll_div(priv->mmc_id, CLOCK_ID_PERIPH, clock, - &div); -#endif + + rate = clk_set_rate(&priv->clk, clock); + div = (rate + clock - 1) / clock; debug("div = %d\n", div); writew(0, &priv->reg->clkcon); @@ -593,10 +571,7 @@ static int tegra_mmc_probe(struct udevice *dev) { struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct tegra_mmc_priv *priv = dev_get_priv(dev); - int bus_width; -#ifdef CONFIG_TEGRA186 - int ret; -#endif + int bus_width, ret; priv->cfg.name = "Tegra SD/MMC"; priv->cfg.ops = &tegra_mmc_ops; @@ -625,7 +600,6 @@ static int tegra_mmc_probe(struct udevice *dev) priv->reg = (void *)dev_get_addr(dev); -#ifdef CONFIG_TEGRA186 ret = reset_get_by_name(dev, "sdhci", &priv->reset_ctl); if (ret) { debug("reset_get_by_name() failed: %d\n", ret); @@ -649,15 +623,6 @@ static int tegra_mmc_probe(struct udevice *dev) ret = reset_deassert(&priv->reset_ctl); if (ret) return ret; -#else - priv->mmc_id = clock_decode_periph_id(gd->fdt_blob, dev->of_offset); - if (priv->mmc_id == PERIPH_ID_NONE) { - debug("%s: could not decode periph id\n", __func__); - return -FDT_ERR_NOTFOUND; - } - - clock_start_periph_pll(priv->mmc_id, CLOCK_ID_PERIPH, 20000000); -#endif /* These GPIOs are optional */ gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, -- 2.39.5