From ea39d4b281090fc421a90125cc0c96405cacef0c Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Thu, 8 Mar 2012 12:33:25 +0000
Subject: [PATCH] docs: add stm32 dual bank example

Change-Id: I1dfe134e2c7694fc978d14b4b21bdf9c82ca4b16
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/507
Tested-by: jenkins
---
 doc/openocd.texi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 0f24f859..71605ece 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -4905,6 +4905,12 @@ the chip identification register, and autoconfigures itself.
 flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
 @end example
 
+If you have a target with dual flash banks then define the second bank
+as per the following example.
+@example
+flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME
+@end example
+
 Some stm32f1x-specific commands
 @footnote{Currently there is a @command{stm32f1x mass_erase} command.
 That seems pointless since the same effect can be had using the
-- 
2.39.5