From eb6f87cc074c0d1edbd6acfe76ef18ee107c5dba Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 18 Apr 2017 13:49:36 +0800 Subject: [PATCH] ARM: dts: at91: Add dts files for at91sam9m10g45ek The device tree source files of at91sam9m10g45ek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD, pioE) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- arch/arm/dts/Makefile | 2 + arch/arm/dts/at91sam9g45.dtsi | 218 +++++++++--------- arch/arm/dts/at91sam9m10g45ek.dts | 359 ++++++++++++++++++++++++++++++ 3 files changed, 474 insertions(+), 105 deletions(-) create mode 100644 arch/arm/dts/at91sam9m10g45ek.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 2417f1fc97..129e341705 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -352,6 +352,8 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2e-evm.dtb \ keystone-k2g-evm.dtb +dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb + dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ diff --git a/arch/arm/dts/at91sam9g45.dtsi b/arch/arm/dts/at91sam9g45.dtsi index af8b708ac3..1be1270c57 100644 --- a/arch/arm/dts/at91sam9g45.dtsi +++ b/arch/arm/dts/at91sam9g45.dtsi @@ -84,12 +84,14 @@ #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; @@ -121,6 +123,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; + u-boot,dm-pre-reloc; main_osc: main_osc { compatible = "atmel,at91rm9200-clk-main-osc"; @@ -135,7 +138,7 @@ clocks = <&main_osc>; }; - plla: pllack { + plla: pllack@0 { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_LOCKA>; @@ -173,6 +176,7 @@ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; atmel,clk-output-range = <0 133333333>; atmel,clk-divisors = <1 2 4 3>; + u-boot,dm-pre-reloc; }; usb: usbck { @@ -188,13 +192,13 @@ interrupt-parent = <&pmc>; clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - prog0: prog0 { + prog0: prog@0 { #clock-cells = <0>; reg = <0>; interrupts = ; }; - prog1: prog1 { + prog1: prog@1 { #clock-cells = <0>; reg = <1>; interrupts = ; @@ -206,25 +210,25 @@ #address-cells = <1>; #size-cells = <0>; - ddrck: ddrck { + ddrck: ddrck@2 { #clock-cells = <0>; reg = <2>; clocks = <&mck>; }; - uhpck: uhpck { + uhpck: uhpck@6 { #clock-cells = <0>; reg = <6>; clocks = <&usb>; }; - pck0: pck0 { + pck0: pck0@8 { #clock-cells = <0>; reg = <8>; clocks = <&prog0>; }; - pck1: pck1 { + pck1: pck1@9 { #clock-cells = <0>; reg = <9>; clocks = <&prog1>; @@ -237,147 +241,147 @@ #size-cells = <0>; clocks = <&mck>; - pioA_clk: pioA_clk { + pioA_clk: pioA_clk@2 { #clock-cells = <0>; reg = <2>; }; - pioB_clk: pioB_clk { + pioB_clk: pioB_clk@3 { #clock-cells = <0>; reg = <3>; }; - pioC_clk: pioC_clk { + pioC_clk: pioC_clk@4 { #clock-cells = <0>; reg = <4>; }; - pioDE_clk: pioDE_clk { + pioDE_clk: pioDE_clk@5 { #clock-cells = <0>; reg = <5>; }; - trng_clk: trng_clk { + trng_clk: trng_clk@6 { #clock-cells = <0>; reg = <6>; }; - usart0_clk: usart0_clk { + usart0_clk: usart0_clk@7 { #clock-cells = <0>; reg = <7>; }; - usart1_clk: usart1_clk { + usart1_clk: usart1_clk@8 { #clock-cells = <0>; reg = <8>; }; - usart2_clk: usart2_clk { + usart2_clk: usart2_clk@9 { #clock-cells = <0>; reg = <9>; }; - usart3_clk: usart3_clk { + usart3_clk: usart3_clk@10 { #clock-cells = <0>; reg = <10>; }; - mci0_clk: mci0_clk { + mci0_clk: mci0_clk@11 { #clock-cells = <0>; reg = <11>; }; - twi0_clk: twi0_clk { + twi0_clk: twi0_clk@12 { #clock-cells = <0>; reg = <12>; }; - twi1_clk: twi1_clk { + twi1_clk: twi1_clk@13 { #clock-cells = <0>; reg = <13>; }; - spi0_clk: spi0_clk { + spi0_clk: spi0_clk@14 { #clock-cells = <0>; reg = <14>; }; - spi1_clk: spi1_clk { + spi1_clk: spi1_clk@15 { #clock-cells = <0>; reg = <15>; }; - ssc0_clk: ssc0_clk { + ssc0_clk: ssc0_clk@16 { #clock-cells = <0>; reg = <16>; }; - ssc1_clk: ssc1_clk { + ssc1_clk: ssc1_clk@17 { #clock-cells = <0>; reg = <17>; }; - tcb0_clk: tcb0_clk { + tcb0_clk: tcb0_clk@18 { #clock-cells = <0>; reg = <18>; }; - pwm_clk: pwm_clk { + pwm_clk: pwm_clk@19 { #clock-cells = <0>; reg = <19>; }; - adc_clk: adc_clk { + adc_clk: adc_clk@20 { #clock-cells = <0>; reg = <20>; }; - dma0_clk: dma0_clk { + dma0_clk: dma0_clk@21 { #clock-cells = <0>; reg = <21>; }; - uhphs_clk: uhphs_clk { + uhphs_clk: uhphs_clk@22 { #clock-cells = <0>; reg = <22>; }; - lcd_clk: lcd_clk { + lcd_clk: lcd_clk@23 { #clock-cells = <0>; reg = <23>; }; - ac97_clk: ac97_clk { + ac97_clk: ac97_clk@24 { #clock-cells = <0>; reg = <24>; }; - macb0_clk: macb0_clk { + macb0_clk: macb0_clk@25 { #clock-cells = <0>; reg = <25>; }; - isi_clk: isi_clk { + isi_clk: isi_clk@26 { #clock-cells = <0>; reg = <26>; }; - udphs_clk: udphs_clk { + udphs_clk: udphs_clk@27 { #clock-cells = <0>; reg = <27>; }; - aestdessha_clk: aestdessha_clk { + aestdessha_clk: aestdessha_clk@28 { #clock-cells = <0>; reg = <28>; }; - mci1_clk: mci1_clk { + mci1_clk: mci1_clk@29 { #clock-cells = <0>; reg = <29>; }; - vdec_clk: vdec_clk { + vdec_clk: vdec_clk@30 { #clock-cells = <0>; reg = <30>; }; @@ -434,6 +438,13 @@ #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; + reg = <0xfffff200 0x200 + 0xfffff400 0x200 + 0xfffff600 0x200 + 0xfffff800 0x200 + 0xfffffa00 0x200 + >; + u-boot,dm-pre-reloc; atmel,mux-mask = < /* A B */ @@ -476,10 +487,11 @@ }; dbgu { + u-boot,dm-pre-reloc; pinctrl_dbgu: dbgu-0 { atmel,pins = - ; /* PB13 periph A */ + ; }; }; @@ -845,61 +857,61 @@ AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; }; + }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioA_clk>; - }; + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioB_clk>; - }; + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioC_clk>; - }; + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x200>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioDE_clk>; - }; + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioDE_clk>; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x200>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioDE_clk>; - }; + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioDE_clk>; }; dbgu: serial@ffffee00 { @@ -978,7 +990,7 @@ trng@fffcc000 { compatible = "atmel,at91sam9g45-trng"; - reg = <0xfffcc000 0x4000>; + reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&trng_clk>; }; @@ -1044,28 +1056,24 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1169,13 +1177,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1183,7 +1191,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1191,21 +1199,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1213,7 +1221,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1320,7 +1328,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ &pioA 21 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/dts/at91sam9m10g45ek.dts b/arch/arm/dts/at91sam9m10g45ek.dts new file mode 100644 index 0000000000..52a76fefde --- /dev/null +++ b/arch/arm/dts/at91sam9m10g45ek.dts @@ -0,0 +1,359 @@ +/* + * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g45.dtsi" +#include + +/ { + model = "Atmel AT91SAM9M10G45-EK"; + compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; + u-boot,dm-pre-reloc; + }; + + memory { + reg = <0x70000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + u-boot,dm-pre-reloc; + }; + + usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@fff84000 { + status = "okay"; + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + i2c1: i2c@fff88000 { + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; + }; + }; + + pinctrl@fffff200 { + camera_sensor { + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + ; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + ; + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + ; + }; + }; + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + ; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + ; /* PD29 gpio WP pin pull up */ + }; + }; + + pwm0 { + pinctrl_pwm_leds: pwm-led { + atmel,pins = + ; /* PD31 periph B */ + }; + }; + }; + + spi0: spi@fffa4000{ + status = "okay"; + cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <13000000>; + reg = <0>; + }; + }; + + usb2: gadget@fff78000 { + atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + adc0: adc@fffb0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + + isi@fffb4000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + status = "okay"; + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + pwm0: pwm@fffb8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_leds>; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + gpbr: syscon@fffffd60 { + status = "okay"; + }; + + rtc@fffffdb0 { + status = "okay"; + }; + }; + + fb0: fb@0x00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "bootstrap/uboot/kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + data@4000000 { + label = "data"; + reg = <0x4000000 0xC000000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + d8 { + label = "d8"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + d6 { + label = "d6"; + pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "nand-disk"; + }; + + d7 { + label = "d7"; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "mmc0"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + left_click { + label = "left_click"; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; + linux,code = <272>; + wakeup-source; + }; + + right_click { + label = "right_click"; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; + linux,code = <273>; + wakeup-source; + }; + + left { + label = "Joystick Left"; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; + linux,code = <105>; + }; + + right { + label = "Joystick Right"; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; + linux,code = <106>; + }; + + up { + label = "Joystick Up"; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; + linux,code = <103>; + }; + + down { + label = "Joystick Down"; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; + linux,code = <108>; + }; + + enter { + label = "Joystick Press"; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; + linux,code = <28>; + }; + }; +}; -- 2.39.5