From ec274b270701dee9791e61310f171c8c4be133b1 Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Tue, 9 Jun 2009 01:01:13 +0000
Subject: [PATCH] Revert changes from r2134 that snuck into the commit.  Mea
 culpa.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 tcl/target/str912.cfg | 66 ++++++++++++++-----------------------------
 1 file changed, 21 insertions(+), 45 deletions(-)

diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index 776a8e6d..705326b5 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -1,6 +1,4 @@
 # script for str9
-# For more information about the configuration files, take a look at:
-# openocd.texi
 
 if { [info exists CHIPNAME] } {	
    set  _CHIPNAME $CHIPNAME    
@@ -21,74 +19,52 @@ jtag_nsrst_delay 100
 jtag_ntrst_delay 100
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
-#reset_config trst_and_srst
+reset_config trst_and_srst
 
 if { [info exists FLASHTAPID ] } {
    set _FLASHTAPID $FLASHTAPID
 } else {
    set _FLASHTAPID 0x04570041
 }
-jtag newtap $_CHIPNAME flash \
-	-irlen 8 -ircapture 0x1 -irmask 0x1 \
-	-expected-id $_FLASHTAPID
+jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
 
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x25966041
 }
-jtag newtap $_CHIPNAME cpu \
-	-irlen 4 -ircapture 0x1 -irmask 0xf \
-	-expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 
 if { [info exists BSTAPID ] } {
-   set _BSTAPID1 $BSTAPID
-   set _BSTAPID2 $BSTAPID
+   set _BSTAPID $BSTAPID
 } else {
-   set _BSTAPID1 0x1457f041
-   set _BSTAPID2 0x2457f041
+   set _BSTAPID 0x1457f041
 }
-jtag newtap $_CHIPNAME bs \
-	-irlen 5 -ircapture 0x1 -irmask 0x1 \
-	-expected-id $_BSTAPID1 -expected-id $_BSTAPID2
+jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e \
-	-endian $_ENDIAN \
-	-chain-position $_TARGETNAME \
-	-variant arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
 
 $_TARGETNAME configure -event reset-start { jtag_rclk 16 }
 
-proc str9x_config { } {
-	# -- Enable 96K RAM w/:
-	#    PFQBC enabled / DTCM & AHB wait-states disabled
-	mww 0x5C002034 0x0191
-	#    PFQBC disabled / DTCM & AHB wait-states enabled
-	#mww 0x5C002034 0x0196
-
-	# 256K/32k
-	str9x flash_config 0 3 2 0 0x40000
-	# 512K/32K 
-	#str9x flash_config 0 4 2 0 0x80000
-}
+$_TARGETNAME configure -event reset-init {
+	# We can increase speed now that we know the target is halted.
+	#jtag_rclk 3000
+	
+	# -- Enable 96K RAM
+	# PFQBC enabled / DTCM & AHB wait-states disabled
+	mww 0x5C002034 0x0191 
 
-proc str9x_init { } {
-	# enable RTCK
-	jtag_rclk 0
-	str9x_config
+	str9x flash_config 0 4 2 0 0x80000
+	flash protect 0 0 7 off
 }
 
-$_TARGETNAME configure -event reset-init str9x_init
-
-$_TARGETNAME configure \
-	-work-area-virt 0 \
-	-work-area-phys 0x50000000 \
-	-work-area-size 16384 \
-	-work-area-backup 0
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00040000 0 0 0
-flash bank str9x 0x00040000 0x00008000 0 0 0
+flash bank str9x 0x00000000 0x00080000 0 0 0
+flash bank str9x 0x00080000 0x00008000 0 0 0
 
+# For more information about the configuration files, take a look at:
+# openocd.texi
-- 
2.39.5