From ec33de3d12fca887c15b90f319aa7b9804981f70 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 8 Nov 2011 23:18:14 +0000 Subject: [PATCH] iMX28: Add SPI driver Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Wolfgang Denk Cc: Detlev Zundel --- drivers/spi/Makefile | 1 + drivers/spi/mxs_spi.c | 186 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 187 insertions(+) create mode 100644 drivers/spi/mxs_spi.c diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 84ad6fade0..6f389f0934 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o +COBJS-$(CONFIG_MXS_SPI) += mxs_spi.o COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c new file mode 100644 index 0000000000..4c27fef3d1 --- /dev/null +++ b/drivers/spi/mxs_spi.c @@ -0,0 +1,186 @@ +/* + * Freescale i.MX28 SPI driver + * + * Copyright (C) 2011 Marek Vasut + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * NOTE: This driver only supports the SPI-controller chipselects, + * GPIO driven chipselects are not supported. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MXS_SPI_MAX_TIMEOUT 1000000 +#define MXS_SPI_PORT_OFFSET 0x2000 + +struct mxs_spi_slave { + struct spi_slave slave; + uint32_t max_khz; + uint32_t mode; + struct mx28_ssp_regs *regs; +}; + +static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave) +{ + return container_of(slave, struct mxs_spi_slave, slave); +} + +void spi_init(void) +{ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct mxs_spi_slave *mxs_slave; + uint32_t addr; + + if (bus > 3) { + printf("MXS SPI: Max bus number is 3\n"); + return NULL; + } + + mxs_slave = malloc(sizeof(struct mxs_spi_slave)); + if (!mxs_slave) + return NULL; + + addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET); + + mxs_slave->slave.bus = bus; + mxs_slave->slave.cs = cs; + mxs_slave->max_khz = max_hz / 1000; + mxs_slave->mode = mode; + mxs_slave->regs = (struct mx28_ssp_regs *)addr; + + return &mxs_slave->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + free(mxs_slave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; + uint32_t reg = 0; + + mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + + writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); + + reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS; + reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0; + reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0; + writel(reg, &ssp_regs->hw_ssp_ctrl1); + + writel(0, &ssp_regs->hw_ssp_cmd0); + + mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs) +{ + writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set); + writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr); +} + +static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs) +{ + writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr); + writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; + int len = bitlen / 8; + const char *tx = dout; + char *rx = din; + + if (bitlen == 0) + return 0; + + if (!rx && !tx) + return 0; + + if (flags & SPI_XFER_BEGIN) + mxs_spi_start_xfer(ssp_regs); + + while (len--) { + /* We transfer 1 byte */ + writel(1, &ssp_regs->hw_ssp_xfer_size); + + if ((flags & SPI_XFER_END) && !len) + mxs_spi_end_xfer(ssp_regs); + + if (tx) + writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr); + else + writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set); + + writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set); + + if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, + SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for start\n"); + return -1; + } + + if (tx) + writel(*tx++, &ssp_regs->hw_ssp_data); + + writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set); + + if (rx) { + if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, + SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for data\n"); + return -1; + } + + *rx = readl(&ssp_regs->hw_ssp_data); + rx++; + } + + if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, + SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for finish\n"); + return -1; + } + } + + return 0; +} -- 2.39.5