From ed9072c797f4002398ee98f59713711c10dc34cc Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen Date: Wed, 9 May 2018 15:24:33 +0300 Subject: [PATCH] net: Drop CONFIG_TSI108_ETH Last user of this driver went away in June 2015 in commit d928664f4101e24 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support") Signed-off-by: Tuomas Tynkkynen --- drivers/net/Makefile | 1 - drivers/net/tsi108_eth.c | 1015 ---------------------------------- include/netdev.h | 1 - scripts/config_whitelist.txt | 1 - 4 files changed, 1018 deletions(-) delete mode 100644 drivers/net/tsi108_eth.c diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 851f82fb01..584bfdf2f9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -58,7 +58,6 @@ obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o -obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_ULI526X) += uli526x.o obj-$(CONFIG_VSC7385_ENET) += vsc7385.o obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c deleted file mode 100644 index 108cf61647..0000000000 --- a/drivers/net/tsi108_eth.c +++ /dev/null @@ -1,1015 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*********************************************************************** - * - * Copyright (c) 2005 Freescale Semiconductor, Inc. - * - * Description: - * Ethernet interface for Tundra TSI108 bridge chip - * - ***********************************************************************/ - -#include - -#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2) -#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2" -#endif - -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define TSI108_ETH_DEBUG 7 -#else -#define TSI108_ETH_DEBUG 0 -#endif - -#if TSI108_ETH_DEBUG > 0 -#define debug_lev(lev, fmt, args...) \ -if (lev <= TSI108_ETH_DEBUG) \ -printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) -#else -#define debug_lev(lev, fmt, args...) do{}while(0) -#endif - -#define RX_PRINT_ERRORS -#define TX_PRINT_ERRORS - -#define ETH_BASE (CONFIG_SYS_TSI108_CSR_BASE + 0x6000) - -#define ETH_PORT_OFFSET 0x400 - -#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset)))) - -#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) -#define MAC_CONFIG_1_TX_ENABLE (0x00000001) -#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) -#define MAC_CONFIG_1_RX_ENABLE (0x00000004) -#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) -#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) -#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) -#define MAC_CONFIG_1_LOOP_BACK (0x00000100) -#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) -#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) -#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) -#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) -#define MAC_CONFIG_1_SIM_RESET (0x40000000) -#define MAC_CONFIG_1_SOFT_RESET (0x80000000) - -#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) -#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) -#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) -#define MAC_CONFIG_2_PAD_CRC (0x00000004) -#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) -#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) -#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) -#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) -#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ -#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ - -#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) - -#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) -#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) -#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) -#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) -#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) - -#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) -#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) -#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) - -#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) -#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) -#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) - -#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) -#define MII_MGMT_INDICATORS_BUSY (0x00000001) -#define MII_MGMT_INDICATORS_SCAN (0x00000002) -#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) - -#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) -#define INTERFACE_STATUS_LINK_FAIL (0x00000008) -#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) - -#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) -#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) - -#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) -#define PORT_CONTROL_PRI (0x00000001) -#define PORT_CONTROL_BPT (0x00010000) -#define PORT_CONTROL_SPD (0x00040000) -#define PORT_CONTROL_RBC (0x00080000) -#define PORT_CONTROL_PRB (0x00200000) -#define PORT_CONTROL_DIS (0x00400000) -#define PORT_CONTROL_TBI (0x00800000) -#define PORT_CONTROL_STE (0x10000000) -#define PORT_CONTROL_ZOR (0x20000000) -#define PORT_CONTROL_CLR (0x40000000) -#define PORT_CONTROL_SRT (0x80000000) - -#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) -#define TX_CONFIG_START_Q (0x00000003) -#define TX_CONFIG_EHP (0x00400000) -#define TX_CONFIG_CHP (0x00800000) -#define TX_CONFIG_RST (0x80000000) - -#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) -#define TX_CONTROL_GO (0x00008000) -#define TX_CONTROL_MP (0x01000000) -#define TX_CONTROL_EAI (0x20000000) -#define TX_CONTROL_ABT (0x40000000) -#define TX_CONTROL_EII (0x80000000) - -#define reg_TX_STATUS(base) __REG32(base, 0x00000228) -#define TX_STATUS_QUEUE_USABLE (0x0000000f) -#define TX_STATUS_CURR_Q (0x00000300) -#define TX_STATUS_ACT (0x00008000) -#define TX_STATUS_QUEUE_IDLE (0x000f0000) -#define TX_STATUS_EOQ_PENDING (0x0f000000) - -#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) -#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) -#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) -#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) - -#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) - -#define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270) -#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) - -#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) - -#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) -#define TX_ERROR_STATUS (0x00000278) -#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) -#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) -#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) -#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) -#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) -#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) -#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) - -#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) -#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define TX_QUEUE_0_CONFIG_AM (0x00004000) -#define TX_QUEUE_0_CONFIG_GVI (0x00008000) -#define TX_QUEUE_0_CONFIG_EEI (0x00010000) -#define TX_QUEUE_0_CONFIG_ELI (0x00020000) -#define TX_QUEUE_0_CONFIG_ENI (0x00040000) -#define TX_QUEUE_0_CONFIG_ESI (0x00080000) -#define TX_QUEUE_0_CONFIG_EDI (0x00100000) - -#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) -#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) - -#define OCN_PORT_HLP 0 /* HLP Interface */ -#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ -#define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */ -#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ -#define OCN_PORT_MEMORY 4 /* Memory Controller */ -#define OCN_PORT_DMA 5 /* DMA Controller */ -#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ -#define OCN_PORT_PRINT 7 /* Print Engine Interface */ - -#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) - -#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) -#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) - -#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) -#define RX_CONFIG_DEF_Q (0x00000003) -#define RX_CONFIG_EMF (0x00000100) -#define RX_CONFIG_EUF (0x00000200) -#define RX_CONFIG_BFE (0x00000400) -#define RX_CONFIG_MFE (0x00000800) -#define RX_CONFIG_UFE (0x00001000) -#define RX_CONFIG_SE (0x00002000) -#define RX_CONFIG_ABF (0x00200000) -#define RX_CONFIG_APE (0x00400000) -#define RX_CONFIG_CHP (0x00800000) -#define RX_CONFIG_RST (0x80000000) - -#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) -#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) -#define GE_E0_RX_CONTROL_GO (0x00008000) -#define GE_E0_RX_CONTROL_EAI (0x20000000) -#define GE_E0_RX_CONTROL_ABT (0x40000000) -#define GE_E0_RX_CONTROL_EII (0x80000000) - -#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) -#define RX_EXTENDED_STATUS (0x0000032c) -#define RX_EXTENDED_STATUS_EOQ (0x0000000f) -#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) -#define RX_EXTENDED_STATUS_EOF (0x00000f00) -#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) - -#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) - -#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) -#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) - -#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) - -#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) -#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define RX_QUEUE_0_CONFIG_AM (0x00004000) -#define RX_QUEUE_0_CONFIG_EEI (0x00010000) -#define RX_QUEUE_0_CONFIG_ELI (0x00020000) -#define RX_QUEUE_0_CONFIG_ENI (0x00040000) -#define RX_QUEUE_0_CONFIG_ESI (0x00080000) -#define RX_QUEUE_0_CONFIG_EDI (0x00100000) - -#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) -#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) - -#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) - -#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) -#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) - -/* - * PHY register definitions - */ -/* the first 15 PHY registers are standard. */ -#define PHY_CTRL_REG 0 /* Control Register */ -#define PHY_STATUS_REG 1 /* Status Regiser */ -#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ -#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ -#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ -#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ - -/* - * PHY Register bit masks. - */ -#define PHY_CTRL_RESET (1 << 15) -#define PHY_CTRL_LOOPBACK (1 << 14) -#define PHY_CTRL_SPEED0 (1 << 13) -#define PHY_CTRL_AN_EN (1 << 12) -#define PHY_CTRL_PWR_DN (1 << 11) -#define PHY_CTRL_ISOLATE (1 << 10) -#define PHY_CTRL_RESTART_AN (1 << 9) -#define PHY_CTRL_FULL_DUPLEX (1 << 8) -#define PHY_CTRL_CT_EN (1 << 7) -#define PHY_CTRL_SPEED1 (1 << 6) - -#define PHY_STAT_100BASE_T4 (1 << 15) -#define PHY_STAT_100BASE_X_FD (1 << 14) -#define PHY_STAT_100BASE_X_HD (1 << 13) -#define PHY_STAT_10BASE_T_FD (1 << 12) -#define PHY_STAT_10BASE_T_HD (1 << 11) -#define PHY_STAT_100BASE_T2_FD (1 << 10) -#define PHY_STAT_100BASE_T2_HD (1 << 9) -#define PHY_STAT_EXT_STAT (1 << 8) -#define PHY_STAT_RESERVED (1 << 7) -#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ -#define PHY_STAT_AN_COMPLETE (1 << 5) -#define PHY_STAT_REM_FAULT (1 << 4) -#define PHY_STAT_AN_CAP (1 << 3) -#define PHY_STAT_LINK_UP (1 << 2) -#define PHY_STAT_JABBER (1 << 1) -#define PHY_STAT_EXT_CAP (1 << 0) - -#define TBI_CONTROL_2 0x11 -#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 -#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 -#define TBI_CONTROL_2_G_MII_MODE 0x0010 -#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 -#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 -#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 -#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 -#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 -#define TBI_CONTROL_2_SOFT_RESET 0x8000 - -/* marvel specific */ -#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ -#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ -#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ - -/* - * MARVELL 88E1111 PHY register bit masks - */ -/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */ - -#define SPEC_STAT_SPEED_MASK (3 << 14) -#define SPEC_STAT_FULL_DUP (1 << 13) -#define SPEC_STAT_PAGE_RCVD (1 << 12) -#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ -#define SPEC_STAT_LINK_UP (1 << 10) -#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */ -#define SPEC_STAT_MDIX (1 << 6) -#define SPEC_STAT_POLARITY (1 << 1) -#define SPEC_STAT_JABBER (1 << 0) - -#define SPEED_1000 (2 << 14) -#define SPEED_100 (1 << 14) -#define SPEED_10 (0 << 14) - -#define TBI_ADDR 0x1E /* Ten Bit Interface address */ - -/* negotiated link parameters */ -#define LINK_SPEED_UNKNOWN 0 -#define LINK_SPEED_10 1 -#define LINK_SPEED_100 2 -#define LINK_SPEED_1000 3 - -#define LINK_DUPLEX_UNKNOWN 0 -#define LINK_DUPLEX_HALF 1 -#define LINK_DUPLEX_FULL 2 - -static unsigned int phy_address[] = { 8, 9 }; - -#define vuint32 volatile u32 - -/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte) - * This structure is accessed by the ethernet DMA engine which means it - * MUST be in LITTLE ENDIAN format */ -struct dma_descriptor { - vuint32 start_addr0; /* buffer address, least significant bytes. */ - vuint32 start_addr1; /* buffer address, most significant bytes. */ - vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */ - vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */ - vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */ - vuint32 config_status; /* Configuration/Status. */ - vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */ - vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */ -}; - -/* last next descriptor address flag */ -#define DMA_DESCR_LAST (1 << 31) - -/* TX DMA descriptor config status bits */ -#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ -#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ -#define DMA_DESCR_TX_PFVLAN (1 << 2) -#define DMA_DESCR_TX_HUGE (1 << 3) -#define DMA_DESCR_TX_PAD (1 << 4) -#define DMA_DESCR_TX_CRC (1 << 5) -#define DMA_DESCR_TX_DESCR_INT (1 << 14) -#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 -#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) -#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) -#define DMA_DESCR_TX_UNDERRUN (1 << 25) -#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) -#define DMA_DESCR_TX_OK (1 << 30) -#define DMA_DESCR_TX_OWNER (1 << 31) - -/* RX DMA descriptor status bits */ -#define DMA_DESCR_RX_EOF (1 << 0) -#define DMA_DESCR_RX_SOF (1 << 1) -#define DMA_DESCR_RX_VTF (1 << 2) -#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) -#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) -#define DMA_DESCR_RX_HASH_MATCH (1 << 7) -#define DMA_DESCR_RX_BAD_FRAME (1 << 8) -#define DMA_DESCR_RX_OVERRUN (1 << 9) -#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) -#define DMA_DESCR_RX_CRC_ERROR (1 << 12) -#define DMA_DESCR_RX_DESCR_INT (1 << 13) -#define DMA_DESCR_RX_OWNER (1 << 15) - -#define RX_BUFFER_SIZE PKTSIZE -#define NUM_RX_DESC PKTBUFSRX - -static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32))); - -static struct dma_descriptor rx_descr_array[NUM_RX_DESC] - __attribute__ ((aligned(32))); - -static struct dma_descriptor *rx_descr_current; - -static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis); -static int tsi108_eth_send(struct eth_device *dev, void *packet, int length); -static int tsi108_eth_recv (struct eth_device *dev); -static void tsi108_eth_halt (struct eth_device *dev); -static unsigned int read_phy (unsigned int base, - unsigned int phy_addr, unsigned int phy_reg); -static void write_phy (unsigned int base, - unsigned int phy_addr, - unsigned int phy_reg, unsigned int phy_data); - -#if TSI108_ETH_DEBUG > 100 -/* - * print phy debug infomation - */ -static void dump_phy_regs (unsigned int phy_addr) -{ - int i; - - printf ("PHY %d registers\n", phy_addr); - for (i = 0; i <= 30; i++) { - printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i)); - } - printf ("\n"); - -} -#else -#define dump_phy_regs(base) do{}while(0) -#endif - -#if TSI108_ETH_DEBUG > 100 -/* - * print debug infomation - */ -static void tx_diag_regs (unsigned int base) -{ - int i; - unsigned long dummy; - - printf ("TX diagnostics registers\n"); - reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI; - udelay (1000); - dummy = reg_TX_DIAGNOSTIC_DATA(base); - for (i = 0x00; i <= 0x05; i++) { - udelay (1000); - printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); - } - reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI; - udelay (1000); - dummy = reg_TX_DIAGNOSTIC_DATA(base); - for (i = 0x40; i <= 0x47; i++) { - udelay (1000); - printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); - } - printf ("\n"); - -} -#else -#define tx_diag_regs(base) do{}while(0) -#endif - -#if TSI108_ETH_DEBUG > 100 -/* - * print debug infomation - */ -static void rx_diag_regs (unsigned int base) -{ - int i; - unsigned long dummy; - - printf ("RX diagnostics registers\n"); - reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI; - udelay (1000); - dummy = reg_RX_DIAGNOSTIC_DATA(base); - for (i = 0x00; i <= 0x05; i++) { - udelay (1000); - printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); - } - reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI; - udelay (1000); - dummy = reg_RX_DIAGNOSTIC_DATA(base); - for (i = 0x08; i <= 0x0a; i++) { - udelay (1000); - printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); - } - printf ("\n"); - -} -#else -#define rx_diag_regs(base) do{}while(0) -#endif - -#if TSI108_ETH_DEBUG > 100 -/* - * print debug infomation - */ -static void debug_mii_regs (unsigned int base) -{ - printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); - printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); - printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); - printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); - printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); - printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); - printf ("\n"); - -} -#else -#define debug_mii_regs(base) do{}while(0) -#endif - -/* - * Wait until the phy bus is non-busy - */ -static void phy_wait (unsigned int base, unsigned int condition) -{ - int timeout; - - timeout = 0; - while (reg_MII_MGMT_INDICATORS(base) & condition) { - udelay (10); - if (++timeout > 10000) { - printf ("ERROR: timeout waiting for phy bus (%d)\n", - condition); - break; - } - } -} - -/* - * read phy register - */ -static unsigned int read_phy (unsigned int base, - unsigned int phy_addr, unsigned int phy_reg) -{ - unsigned int value; - - phy_wait (base, MII_MGMT_INDICATORS_BUSY); - - reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; - - /* Ensure that the Read Cycle bit is cleared prior to next read cycle */ - reg_MII_MGMT_COMMAND(base) = 0; - - /* start the read */ - reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE; - - /* wait for the read to complete */ - phy_wait (base, - MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY); - - value = reg_MII_MGMT_STATUS(base); - - reg_MII_MGMT_COMMAND(base) = 0; - - return value; -} - -/* - * write phy register - */ -static void write_phy (unsigned int base, - unsigned int phy_addr, - unsigned int phy_reg, unsigned int phy_data) -{ - phy_wait (base, MII_MGMT_INDICATORS_BUSY); - - reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; - - /* Ensure that the Read Cycle bit is cleared prior to next cycle */ - reg_MII_MGMT_COMMAND(base) = 0; - - /* start the write */ - reg_MII_MGMT_CONTROL(base) = phy_data; -} - -/* - * configure the marvell 88e1111 phy - */ -static int marvell_88e_phy_config (struct eth_device *dev, int *speed, - int *duplex) -{ - unsigned long base; - unsigned long phy_addr; - unsigned int phy_status; - unsigned int phy_spec_status; - int timeout; - int phy_speed; - int phy_duplex; - unsigned int value; - - phy_speed = LINK_SPEED_UNKNOWN; - phy_duplex = LINK_DUPLEX_UNKNOWN; - - base = dev->iobase; - phy_addr = (unsigned long)dev->priv; - - /* Take the PHY out of reset. */ - write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); - - /* Wait for the reset process to complete. */ - udelay (10); - timeout = 0; - while ((phy_status = - read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { - udelay (10); - if (++timeout > 10000) { - printf ("ERROR: timeout waiting for phy reset\n"); - break; - } - } - - /* TBI Configuration. */ - write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | - TBI_CONTROL_2_RECEIVE_CLOCK_SELECT); - /* Wait for the link to be established. */ - timeout = 0; - do { - udelay (20000); - phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG); - if (++timeout > 100) { - debug_lev(1, "ERROR: unable to establish link!!!\n"); - break; - } - } while ((phy_status & PHY_STAT_LINK_UP) == 0); - - if ((phy_status & PHY_STAT_LINK_UP) == 0) - return 0; - - value = 0; - phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); - if (phy_spec_status & SPEC_STAT_RESOLVED) { - switch (phy_spec_status & SPEC_STAT_SPEED_MASK) { - case SPEED_1000: - phy_speed = LINK_SPEED_1000; - value |= PHY_CTRL_SPEED1; - break; - case SPEED_100: - phy_speed = LINK_SPEED_100; - value |= PHY_CTRL_SPEED0; - break; - case SPEED_10: - phy_speed = LINK_SPEED_10; - break; - } - if (phy_spec_status & SPEC_STAT_FULL_DUP) { - phy_duplex = LINK_DUPLEX_FULL; - value |= PHY_CTRL_FULL_DUPLEX; - } else - phy_duplex = LINK_DUPLEX_HALF; - } - /* set TBI speed */ - write_phy (base, TBI_ADDR, PHY_CTRL_REG, value); - write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); - -#if TSI108_ETH_DEBUG > 0 - printf ("%s link is up", dev->name); - phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); - if (phy_spec_status & SPEC_STAT_RESOLVED) { - switch (phy_speed) { - case LINK_SPEED_1000: - printf (", 1000 Mbps"); - break; - case LINK_SPEED_100: - printf (", 100 Mbps"); - break; - case LINK_SPEED_10: - printf (", 10 Mbps"); - break; - } - if (phy_duplex == LINK_DUPLEX_FULL) - printf (", Full duplex"); - else - printf (", Half duplex"); - } - printf ("\n"); -#endif - - dump_phy_regs (TBI_ADDR); - if (speed) - *speed = phy_speed; - if (duplex) - *duplex = phy_duplex; - - return 1; -} - -/* - * External interface - * - * register the tsi108 ethernet controllers with the multi-ethernet system - */ -int tsi108_eth_initialize (bd_t * bis) -{ - struct eth_device *dev; - int index; - - for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) { - dev = (struct eth_device *)malloc(sizeof(struct eth_device)); - if (!dev) { - printf("tsi108: Can not allocate memory\n"); - break; - } - memset(dev, 0, sizeof(*dev)); - sprintf (dev->name, "TSI108_eth%d", index); - - dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET); - dev->priv = (void *)(phy_address[index]); - dev->init = tsi108_eth_probe; - dev->halt = tsi108_eth_halt; - dev->send = tsi108_eth_send; - dev->recv = tsi108_eth_recv; - - eth_register(dev); - } - return index; -} - -/* - * probe for and initialize a single ethernet interface - */ -static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis) -{ - unsigned long base; - unsigned long value; - int index; - struct dma_descriptor *tx_descr; - struct dma_descriptor *rx_descr; - int speed; - int duplex; - - base = dev->iobase; - - reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT; - - /* Bring DMA/FIFO out of reset. */ - reg_TX_CONFIG(base) = 0x00000000; - reg_RX_CONFIG(base) = 0x00000000; - - reg_TX_THRESHOLDS(base) = (192 << 16) | 192; - reg_RX_THRESHOLDS(base) = (192 << 16) | 112; - - /* Bring MAC out of reset. */ - reg_MAC_CONFIG_1(base) = 0x00000000; - - /* DMA MAC configuration. */ - reg_MAC_CONFIG_1(base) = - MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE; - - reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE; - reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE; - - /* Note: Early tsi108 manual did not have correct byte order - * for the station address.*/ - reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) | - (dev->enetaddr[4] << 16) | - (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0); - - reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) | - (dev->enetaddr[0] << 16); - - if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) - return -1; - - value = - MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC | - MAC_CONFIG_2_CRC_ENABLE; - if (speed == LINK_SPEED_1000) - value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE); - else { - value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE); - reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD; - } - if (duplex == LINK_DUPLEX_FULL) { - value |= MAC_CONFIG_2_FULL_DUPLEX; - reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT; - } else - reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT; - reg_MAC_CONFIG_2(base) = value; - - reg_RX_CONFIG(base) = RX_CONFIG_SE; - reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; - reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; - - /* initialize the RX DMA descriptors */ - rx_descr = &rx_descr_array[0]; - rx_descr_current = rx_descr; - for (index = 0; index < NUM_RX_DESC; index++) { - /* make sure the receive buffers are not in cache */ - invalidate_dcache_range((unsigned long)net_rx_packets[index], - (unsigned long)net_rx_packets[index] + - RX_BUFFER_SIZE); - rx_descr->start_addr0 = - cpu_to_le32((vuint32) net_rx_packets[index]); - rx_descr->start_addr1 = 0; - rx_descr->next_descr_addr0 = - cpu_to_le32((vuint32) (rx_descr + 1)); - rx_descr->next_descr_addr1 = 0; - rx_descr->vlan_byte_count = 0; - rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) | - DMA_DESCR_RX_OWNER); - rx_descr++; - } - rx_descr--; - rx_descr->next_descr_addr0 = 0; - rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); - /* Push the descriptors to RAM so the ethernet DMA can see them */ - invalidate_dcache_range((unsigned long)rx_descr_array, - (unsigned long)rx_descr_array + - sizeof(rx_descr_array)); - - /* enable RX queue */ - reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01; - reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current; - /* enable receive DMA */ - reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; - - reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; - reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; - - /* initialize the TX DMA descriptor */ - tx_descr = &tx_descriptor; - - tx_descr->start_addr0 = 0; - tx_descr->start_addr1 = 0; - tx_descr->next_descr_addr0 = 0; - tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); - tx_descr->vlan_byte_count = 0; - tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK | - DMA_DESCR_TX_SOF | - DMA_DESCR_TX_EOF); - /* enable TX queue */ - reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01; - - return 0; -} - -/* - * send a packet - */ -static int tsi108_eth_send(struct eth_device *dev, void *packet, int length) -{ - unsigned long base; - int timeout; - struct dma_descriptor *tx_descr; - unsigned long status; - - base = dev->iobase; - tx_descr = &tx_descriptor; - - /* Wait until the last packet has been transmitted. */ - timeout = 0; - do { - /* make sure we see the changes made by the DMA engine */ - invalidate_dcache_range((unsigned long)tx_descr, - (unsigned long)tx_descr + - sizeof(struct dma_descriptor)); - - if (timeout != 0) - udelay (15); - if (++timeout > 10000) { - tx_diag_regs(base); - debug_lev(1, - "ERROR: timeout waiting for last transmit packet to be sent\n"); - return 0; - } - } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER)); - - status = le32_to_cpu(tx_descr->config_status); - if ((status & DMA_DESCR_TX_OK) == 0) { -#ifdef TX_PRINT_ERRORS - printf ("TX packet error: 0x%08lx\n %s%s%s%s\n", status, - status & DMA_DESCR_TX_OK ? "tx error, " : "", - status & DMA_DESCR_TX_RETRY_LIMIT ? - "retry limit reached, " : "", - status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "", - status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, " - : ""); -#endif - } - - debug_lev (9, "sending packet %d\n", length); - tx_descr->start_addr0 = cpu_to_le32((vuint32) packet); - tx_descr->start_addr1 = 0; - tx_descr->next_descr_addr0 = 0; - tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); - tx_descr->vlan_byte_count = cpu_to_le32(length); - tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER | - DMA_DESCR_TX_CRC | - DMA_DESCR_TX_PAD | - DMA_DESCR_TX_SOF | - DMA_DESCR_TX_EOF); - - invalidate_dcache_range((unsigned long)tx_descr, - (unsigned long)tx_descr + - sizeof(struct dma_descriptor)); - - invalidate_dcache_range((unsigned long)packet, - (unsigned long)packet + length); - - reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr; - reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID; - - return length; -} - -/* - * Check for received packets and send them up the protocal stack - */ -static int tsi108_eth_recv (struct eth_device *dev) -{ - struct dma_descriptor *rx_descr; - unsigned long base; - int length = 0; - unsigned long status; - uchar *buffer; - - base = dev->iobase; - - /* make sure we see the changes made by the DMA engine */ - invalidate_dcache_range ((unsigned long)rx_descr_array, - (unsigned long)rx_descr_array + - sizeof(rx_descr_array)); - - /* process all of the received packets */ - rx_descr = rx_descr_current; - while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) { - /* check for error */ - status = le32_to_cpu(rx_descr->config_status); - if (status & DMA_DESCR_RX_BAD_FRAME) { -#ifdef RX_PRINT_ERRORS - printf ("RX packet error: 0x%08lx\n %s%s%s%s%s%s\n", - status, - status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " - : "", - status & DMA_DESCR_RX_SHORT_FRAME ? "too short, " - : "", - status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " : - "", - status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "", - status & DMA_DESCR_RX_MAX_FRAME_LEN ? - "max length, " : "", - status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " : - ""); -#endif - } else { - length = - le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF; - - /*** process packet ***/ - buffer = (uchar *)(le32_to_cpu(rx_descr->start_addr0)); - net_process_received_packet(buffer, length); - - invalidate_dcache_range ((unsigned long)buffer, - (unsigned long)buffer + - RX_BUFFER_SIZE); - } - /* Give this buffer back to the DMA engine */ - rx_descr->vlan_byte_count = 0; - rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) | - DMA_DESCR_RX_OWNER); - /* move descriptor pointer forward */ - rx_descr = - (struct dma_descriptor - *)(le32_to_cpu (rx_descr->next_descr_addr0)); - if (rx_descr == 0) - rx_descr = &rx_descr_array[0]; - } - /* remember where we are for next time */ - rx_descr_current = rx_descr; - - /* If the DMA engine has reached the end of the queue - * start over at the begining */ - if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) { - - reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0; - reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0]; - reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; - } - - return length; -} - -/* - * disable an ethernet interface - */ -static void tsi108_eth_halt (struct eth_device *dev) -{ - unsigned long base; - - base = dev->iobase; - - /* Put DMA/FIFO into reset state. */ - reg_TX_CONFIG(base) = TX_CONFIG_RST; - reg_RX_CONFIG(base) = RX_CONFIG_RST; - - /* Put MAC into reset state. */ - reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET; -} diff --git a/include/netdev.h b/include/netdev.h index 79fcee56d4..f27869072f 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -69,7 +69,6 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); -int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); int armada100_fec_register(unsigned long base_addr); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 7481f322ab..9f3ccecc1d 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4548,7 +4548,6 @@ CONFIG_TSECV2 CONFIG_TSECV2_1 CONFIG_TSEC_TBI CONFIG_TSEC_TBICR_SETTINGS -CONFIG_TSI108_ETH_NUM_PORTS CONFIG_TUGE1 CONFIG_TULIP CONFIG_TULIP_FIX_DAVICOM -- 2.39.5