From f013dacf0a90667fbefe35580f8031a84caeb65e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 4 Dec 2005 00:40:34 +0100 Subject: [PATCH] Code cleanup, especially MIPS for GCC 4.x --- CHANGELOG | 2 +- board/Marvell/db64360/mv_eth.c | 2 +- board/Marvell/db64460/mv_eth.c | 4 +- board/esd/cpci2dp/cpci2dp.c | 44 ++-- board/esd/cpci750/mv_eth.c | 2 +- board/evb64260/eth_addrtbl.c | 2 +- board/incaip/flash.c | 2 +- board/incaip/incaip.c | 2 +- board/incaip/lowlevel_init.S | 9 +- board/mpc8260ads/mpc8260ads.c | 2 +- board/prodrive/p3p440/p3p440.c | 2 +- board/tqm834x/config.mk | 1 - board/tqm834x/pci.c | 36 ++-- board/tqm834x/tqm834x.c | 16 +- cpu/mcf52x2/fec.c | 1 - cpu/mips/incaip_clock.c | 2 +- cpu/mpc83xx/speed.c | 4 +- cpu/mpc8xx/config.mk | 2 +- cpu/ppc4xx/spd_sdram.c | 354 ++++++++++++++++----------------- doc/README.OFT | 2 +- include/configs/TQM834x.h | 6 +- include/configs/o2dnt.h | 2 +- lib_mips/board.c | 2 +- lib_mips/mips_linux.c | 4 +- lib_ppc/board.c | 4 - 25 files changed, 251 insertions(+), 258 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 3f31d86e19..3762f2116e 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -36,7 +36,7 @@ Changes for U-Boot 1.1.4: * Increase malloc arena on TQM5200 board to 256 kB. With 64 kb uniform flash sector size the old value of 128 kB was too small. - + * Fix miiphy global data initialization (problem on 4xx boards when no ethaddr is assigned). Initialization moved from miiphy_register() to eth_initialize(). diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c index 2dd47bf501..3c5dee73b7 100644 --- a/board/Marvell/db64360/mv_eth.c +++ b/board/Marvell/db64360/mv_eth.c @@ -283,7 +283,7 @@ void mv6436x_eth_initialize (bd_t * bis) /* set pointer to memory for stats data structure etc... */ port_private = calloc (sizeof (*ethernet_private), 1); - ethernet_private->port_private = (void *)port_private; + ethernet_private->port_private = (void *)port_private; if (!port_private) { printf ("%s: %s allocation failure, %s\n", __FUNCTION__, dev->name, diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c index a50f174fa5..ec5d581065 100644 --- a/board/Marvell/db64460/mv_eth.c +++ b/board/Marvell/db64460/mv_eth.c @@ -268,7 +268,7 @@ void mv6446x_eth_initialize (bd_t * bis) dev->recv = (void *) db64460_eth_poll; ethernet_private = calloc (sizeof (*ethernet_private), 1); - dev->priv = (void *)ethernet_private; + dev->priv = (void *)ethernet_private; if (!ethernet_private) { printf ("%s: %s allocation failure, %s\n", __FUNCTION__, dev->name, @@ -282,7 +282,7 @@ void mv6446x_eth_initialize (bd_t * bis) /* set pointer to memory for stats data structure etc... */ port_private = calloc (sizeof (*ethernet_private), 1); - ethernet_private->port_private = (void *)port_private; + ethernet_private->port_private = (void *)port_private; if (!port_private) { printf ("%s: %s allocation failure, %s\n", __FUNCTION__, dev->name, diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index b463f0e389..df10c0e6aa 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -36,11 +36,11 @@ int board_early_init_f (void) cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg | 0x00900000); - /* set output pins to high */ - out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED); - /* INTA# is open drain */ + /* set output pins to high */ + out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED); + /* INTA# is open drain */ out32(GPIO0_ODR, CFG_INTA_FAKE); - /* setup for output */ + /* setup for output */ out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP); /* @@ -55,14 +55,14 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) unused */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ return 0; } @@ -142,18 +142,17 @@ int testdram (void) #if defined(CFG_EEPROM_WREN) /* Input: I2C address of EEPROM device to enable. - * -1: deliver current state - * 0: disable write + * -1: deliver current state + * 0: disable write * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done + * Returns: -1: wrong device address + * 0: dis-/en- able done * 0/1: current state if was -1. */ int eeprom_write_enable (unsigned dev_addr, int state) { if (CFG_I2C_EEPROM_ADDR != dev_addr) { return -1; - } - else { + } else { switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ @@ -186,19 +185,16 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1); if (state < 0) { puts ("Query of write access state failed.\n"); - } - else { + } else { printf ("Write access for device 0x%0x is %sabled.\n", CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); state = 0; } - } - else { + } else { if ('0' == argv[1][0]) { /* Disable write access. */ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0); - } - else { + } else { /* Enable write access. */ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1); } diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index 880528f84a..be176dcc84 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -284,7 +284,7 @@ void mv6436x_eth_initialize (bd_t * bis) /* set pointer to memory for stats data structure etc... */ port_private = calloc (sizeof (*ethernet_private), 1); - ethernet_private->port_private = (void *)port_private; + ethernet_private->port_private = (void *)port_private; if (!port_private) { printf ("%s: %s allocation failure, %s\n", __FUNCTION__, dev->name, diff --git a/board/evb64260/eth_addrtbl.c b/board/evb64260/eth_addrtbl.c index 69882f5302..e8ef0e3e52 100644 --- a/board/evb64260/eth_addrtbl.c +++ b/board/evb64260/eth_addrtbl.c @@ -57,7 +57,7 @@ unsigned int initAddressTable (u32 port, u32 hashMode, u32 hashSizeSelector) realAddrTableBase[port] = malloc (bytes + 64); - tableBase = (unsigned int)realAddrTableBase; + tableBase = (unsigned int)realAddrTableBase; if (!tableBase) { printf ("%s: alloc memory failed \n", __FUNCTION__); diff --git a/board/incaip/flash.c b/board/incaip/flash.c index 686f2e96fd..520514dea3 100644 --- a/board/incaip/flash.c +++ b/board/incaip/flash.c @@ -190,7 +190,7 @@ void flash_print_info (flash_info_t *info) int i; uchar *boottype; uchar *bootletter; - uchar *fmt; + char *fmt; uchar botbootletter[] = "B"; uchar topbootletter[] = "T"; uchar botboottype[] = "bottom boot sector"; diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index eb6eaea278..b5d9e00492 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -68,7 +68,7 @@ long int initdram(int board_type) { *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | (rows << 4) | cols; - size = get_ram_size((ulong *)CFG_SDRAM_BASE, + size = get_ram_size((long *)CFG_SDRAM_BASE, max_sdram_size()); if (size > max_size) diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S index fb64ef419d..14d738aa1a 100644 --- a/board/incaip/lowlevel_init.S +++ b/board/incaip/lowlevel_init.S @@ -66,6 +66,7 @@ .globl ebu_init .ent ebu_init ebu_init: +__ebu_init: li t1, EBU_MODUL_BASE li t2, 0xA0000041 @@ -118,6 +119,7 @@ ebu_init: .globl cgu_init .ent cgu_init cgu_init: +__cgu_init: li t1, CGU_MODUL_BASE @@ -182,6 +184,7 @@ cgu_init: .globl sdram_init .ent sdram_init sdram_init: +__sdram_init: li t1, MC_MODUL_BASE @@ -281,11 +284,11 @@ lowlevel_init: /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init() * modify t0 and a0. */ - bal cgu_init + bal __cgu_init nop - bal ebu_init + bal __ebu_init nop - bal sdram_init + bal __sdram_init nop move ra, t0 diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c index 374e97961b..93550e2ad0 100644 --- a/board/mpc8260ads/mpc8260ads.c +++ b/board/mpc8260ads/mpc8260ads.c @@ -251,7 +251,7 @@ void reset_phy (void) /* Advertise all capabilities */ bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1); - + /* Do not bypass Rx/Tx (de)scrambler */ bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR, 0x0000); diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 8ba66bf5e5..d42a643c2f 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -72,7 +72,7 @@ static void wait_for_pci_ready(void) for (;;) { if (in32(GPIO0_IR) & CFG_EREADY_IO) return; - } + } } diff --git a/board/tqm834x/config.mk b/board/tqm834x/config.mk index 9295e77655..f172c4ede0 100644 --- a/board/tqm834x/config.mk +++ b/board/tqm834x/config.mk @@ -21,4 +21,3 @@ # TEXT_BASE = 0x80000000 - diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c index 590987cc8f..5a23e6c55e 100644 --- a/board/tqm834x/pci.c +++ b/board/tqm834x/pci.c @@ -86,29 +86,29 @@ pci_init_board(void) pci_conf = immr->pci_conf; hose = &pci1_hose; - + /* - * Configure PCI controller and PCI_CLK_OUTPUT + * Configure PCI controller and PCI_CLK_OUTPUT */ /* * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one * line actually used for clocking all external PCI devices in TQM83xx. - * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for + * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7 - * are known to hang the board; this issue is under investigation + * are known to hang the board; this issue is under investigation * (13 oct 05) */ reg32 = OCCR_PCICOE1; -#if 0 +#if 0 /* enabling all PCI_CLK_OUTPUT lines HANGS the board... */ reg32 = 0xff000000; -#endif +#endif if (clk->spmr & SPMR_CKID) { /* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR * fields accordingly */ reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR); - + reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \ | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \ | OCCR_PCICD6 | OCCR_PCICD7); @@ -138,7 +138,7 @@ pci_init_board(void) * Configure PCI Outbound Translation Windows */ - /* PCI1 mem space */ + /* PCI1 mem space */ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); @@ -152,8 +152,8 @@ pci_init_board(void) * Configure PCI Inbound Translation Windows */ - /* we need RAM mapped to PCI space for the devices to - * access main memory */ + /* we need RAM mapped to PCI space for the devices to + * access main memory */ pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; @@ -179,10 +179,10 @@ pci_init_board(void) /* System memory space */ pci_set_region(hose->regions + 2, CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - CONFIG_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - + CONFIG_PCI_SYS_MEM_PHYS, + CONFIG_PCI_SYS_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + hose->region_count = 3; pci_setup_indirect(hose, @@ -195,18 +195,18 @@ pci_init_board(void) * Write to Command register */ reg16 = 0xff; - pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, + pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ - pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, + pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, 0x80); #ifdef CONFIG_PCI_SCAN_SHOW diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index f681dc8b74..dada6739b6 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -77,7 +77,7 @@ int board_early_init_r (void) { /* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return 0; - + /* detect the number of Flash banks */ return detect_num_flash_banks(); } @@ -108,7 +108,7 @@ long int initdram (int board_type) set_ddr_config(); udelay(200); - + /* enable DDR controller */ im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | @@ -154,7 +154,7 @@ int checkboard (void) /* get bus width */ w = 32; - if (immr->reset.rcwh & RCWH_PCI64) + if (immr->reset.rcwh & RCWH_PCI64) w = 64; /* get clock */ @@ -192,7 +192,7 @@ static int detect_num_flash_banks(void) ulong total_size; tqm834x_num_flash_banks = 2; /* assume two banks */ - + /* Get bank 1 and 2 information */ bank1_size = flash_get_size(CFG_FLASH_BASE, 0); debug("Bank1 size: %lu\n", bank1_size); @@ -318,10 +318,10 @@ static long int get_ddr_bank_size(short cs, volatile long *base) set_cs_config(cs, 0); return 0; } - + debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n", conf[detected].row, conf[detected].col, conf[detected].size >> 20, base); - + /* configure cs ro detected params */ set_cs_config(cs, CSCONFIG_EN | conf[detected].row | conf[detected].col); @@ -367,7 +367,7 @@ static void set_ddr_config(void) { im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05; SYNC; - + /* timing configuration */ im->ddr.timing_cfg_1 = (4 << TIMING_CFG1_PRETOACT_SHIFT) | @@ -389,7 +389,7 @@ static void set_ddr_config(void) { SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; SYNC; - + /* Set SDRAM mode */ im->ddr.sdram_mode = ((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) << diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c index 3bf3c8d547..a5c50af63c 100644 --- a/cpu/mcf52x2/fec.c +++ b/cpu/mcf52x2/fec.c @@ -567,4 +567,3 @@ int mcf52x2_miiphy_initialize(bd_t *bis) #endif return 0; } - diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c index 65ee8472d0..d0515ca673 100644 --- a/cpu/mips/incaip_clock.c +++ b/cpu/mips/incaip_clock.c @@ -102,7 +102,7 @@ int incaip_set_cpuclk (void) extern void ebu_init(long); extern void cgu_init(long); extern void sdram_init(long); - uchar tmp[64]; + char tmp[64]; ulong cpuclk; if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) { diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 5964260e30..1368fc3fea 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -132,7 +132,7 @@ int get_clocks (void) /* PCI Host Mode */ if (!(im->reset.rcwh & RCWH_PCIHOST)) { - /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH + /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH * the im->reset.rcwhr PCI Host Mode is disabled * FIXME: findout if there is a way to issue some warning */ return -2; @@ -156,7 +156,7 @@ int get_clocks (void) /* PCI Agent Mode */ if (im->reset.rcwh & RCWH_PCIHOST) { - /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH + /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH * the im->reset.rcwhr PCI Host Mode is enabled */ return -3; } diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk index 5fa150e915..bfa6625fa8 100644 --- a/cpu/mpc8xx/config.mk +++ b/cpu/mpc8xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing +PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -ffixed-r29 -mstring -mcpu=860 -msoft-float diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c index 1bdfc1610c..ebd5f3998f 100644 --- a/cpu/ppc4xx/spd_sdram.c +++ b/cpu/ppc4xx/spd_sdram.c @@ -48,49 +48,49 @@ /* * Set default values */ -#ifndef CFG_I2C_SPEED -#define CFG_I2C_SPEED 50000 +#ifndef CFG_I2C_SPEED +#define CFG_I2C_SPEED 50000 #endif -#ifndef CFG_I2C_SLAVE -#define CFG_I2C_SLAVE 0xFE +#ifndef CFG_I2C_SLAVE +#define CFG_I2C_SLAVE 0xFE #endif -#define ONE_BILLION 1000000000 +#define ONE_BILLION 1000000000 -#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */ +#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */ -#define SDRAM0_CFG_DCE 0x80000000 -#define SDRAM0_CFG_SRE 0x40000000 -#define SDRAM0_CFG_PME 0x20000000 -#define SDRAM0_CFG_MEMCHK 0x10000000 -#define SDRAM0_CFG_REGEN 0x08000000 -#define SDRAM0_CFG_ECCDD 0x00400000 -#define SDRAM0_CFG_EMDULR 0x00200000 -#define SDRAM0_CFG_DRW_SHIFT (31-6) -#define SDRAM0_CFG_BRPF_SHIFT (31-8) +#define SDRAM0_CFG_DCE 0x80000000 +#define SDRAM0_CFG_SRE 0x40000000 +#define SDRAM0_CFG_PME 0x20000000 +#define SDRAM0_CFG_MEMCHK 0x10000000 +#define SDRAM0_CFG_REGEN 0x08000000 +#define SDRAM0_CFG_ECCDD 0x00400000 +#define SDRAM0_CFG_EMDULR 0x00200000 +#define SDRAM0_CFG_DRW_SHIFT (31-6) +#define SDRAM0_CFG_BRPF_SHIFT (31-8) -#define SDRAM0_TR_CASL_SHIFT (31-8) -#define SDRAM0_TR_PTA_SHIFT (31-13) -#define SDRAM0_TR_CTP_SHIFT (31-15) -#define SDRAM0_TR_LDF_SHIFT (31-17) -#define SDRAM0_TR_RFTA_SHIFT (31-29) -#define SDRAM0_TR_RCD_SHIFT (31-31) +#define SDRAM0_TR_CASL_SHIFT (31-8) +#define SDRAM0_TR_PTA_SHIFT (31-13) +#define SDRAM0_TR_CTP_SHIFT (31-15) +#define SDRAM0_TR_LDF_SHIFT (31-17) +#define SDRAM0_TR_RFTA_SHIFT (31-29) +#define SDRAM0_TR_RCD_SHIFT (31-31) -#define SDRAM0_RTR_SHIFT (31-15) -#define SDRAM0_ECCCFG_SHIFT (31-11) +#define SDRAM0_RTR_SHIFT (31-15) +#define SDRAM0_ECCCFG_SHIFT (31-11) /* SDRAM0_CFG enable macro */ #define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT ) -#define SDRAM0_BXCR_SZ_MASK 0x000e0000 -#define SDRAM0_BXCR_AM_MASK 0x0000e000 +#define SDRAM0_BXCR_SZ_MASK 0x000e0000 +#define SDRAM0_BXCR_AM_MASK 0x0000e000 -#define SDRAM0_BXCR_SZ_SHIFT (31-14) -#define SDRAM0_BXCR_AM_SHIFT (31-18) +#define SDRAM0_BXCR_SZ_SHIFT (31-14) +#define SDRAM0_BXCR_AM_SHIFT (31-18) -#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) ) -#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) ) +#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) ) +#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) ) #ifdef CONFIG_SPDDRAM_SILENT # define SPD_ERR(x) do { return 0; } while (0) @@ -175,7 +175,7 @@ long int spd_sdram(int(read_spd)(uint addr)) * data from DIMM: * 27 IN Row Precharge Time ( t RP) * 29 MIN RAS to CAS Delay ( t RCD) - * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS + * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS * -------------------------------------------------------------------*/ /* @@ -184,18 +184,18 @@ long int spd_sdram(int(read_spd)(uint addr)) */ tmp = read_spd(127) & 0x6; - if (tmp == 0x02){ /* only cas = 2 supported */ + if (tmp == 0x02) { /* only cas = 2 supported */ min_cas = 2; -/* t_ck = read_spd(9); */ -/* t_ac = read_spd(10); */ - } else if (tmp == 0x04) { /* only cas = 3 supported */ +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ + } else if (tmp == 0x04) { /* only cas = 3 supported */ min_cas = 3; -/* t_ck = read_spd(9); */ -/* t_ac = read_spd(10); */ - } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */ +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ + } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */ min_cas = 2; -/* t_ck = read_spd(23); */ -/* t_ac = read_spd(24); */ +/* t_ck = read_spd(23); */ +/* t_ac = read_spd(24); */ } else { SPD_ERR("SDRAM - unsupported CAS latency \n"); } @@ -263,7 +263,7 @@ long int spd_sdram(int(read_spd)(uint addr)) } /* convert from nsec to bus cycles */ tmp = (tmp * 10) / bus_period_x_10; - sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT; + sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT; /*------------------------------------------------------------------ * determine the number of banks used @@ -292,7 +292,7 @@ long int spd_sdram(int(read_spd)(uint addr)) else if (tmp==4) bank_cnt *= 4; else - bank_cnt = 8; /* 8 is an error code */ + bank_cnt = 8; /* 8 is an error code */ if (bank_cnt > 4) /* we only have 4 banks to work with */ SPD_ERR("SDRAM - unsupported module rows for this width\n"); @@ -323,7 +323,7 @@ long int spd_sdram(int(read_spd)(uint addr)) total_size *= read_spd(5); /* mult by module rows (dimm sides) */ /*------------------------------------------------------------------ - * map rows * cols * banks to a mode + * map rows * cols * banks to a mode * -------------------------------------------------------------------*/ switch (row) { @@ -388,9 +388,9 @@ long int spd_sdram(int(read_spd)(uint addr)) bank_size = total_size / bank_cnt; /* convert bank size to bank size code for ppc4xx by takeing log2(bank_size) - 22 */ - tmp = bank_size; /* start with tmp = bank_size */ + tmp = bank_size; /* start with tmp = bank_size */ bank_code = 0; /* and bank_code = 0 */ - while (tmp > 1) { /* this takes log2 of tmp */ + while (tmp > 1) { /* this takes log2 of tmp */ bank_code++; /* and stores result in bank_code */ tmp = tmp >> 1; } /* bank_code is now log2(bank_size) */ @@ -444,7 +444,7 @@ long int spd_sdram(int(read_spd)(uint addr)) #endif mtsdram0( mem_sdtr1 , sdram0_tr ); - /* SDRAM have a power on delay, 500 micro should do */ + /* SDRAM have a power on delay, 500 micro should do */ udelay(500); sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR; if (ecc_on) @@ -464,172 +464,172 @@ int spd_read(uint addr) return 0; } -#else /* CONFIG_440 */ +#else /* CONFIG_440 */ /*----------------------------------------------------------------------------- | Memory Controller Options 0 +-----------------------------------------------------------------------------*/ -#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */ -#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */ -#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */ -#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */ -#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */ -#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */ -#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */ -#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */ -#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */ -#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */ -#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */ -#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */ +#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */ +#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */ +#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */ +#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */ +#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */ +#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */ +#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */ +#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */ +#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */ +#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */ +#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */ +#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */ /*----------------------------------------------------------------------------- | Memory Controller Options 1 +-----------------------------------------------------------------------------*/ -#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */ -#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */ +#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */ +#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */ /*-----------------------------------------------------------------------------+ | SDRAM DEVPOT Options +-----------------------------------------------------------------------------*/ -#define SDRAM_DEVOPT_DLL 0x80000000 -#define SDRAM_DEVOPT_DS 0x40000000 +#define SDRAM_DEVOPT_DLL 0x80000000 +#define SDRAM_DEVOPT_DS 0x40000000 /*-----------------------------------------------------------------------------+ | SDRAM MCSTS Options +-----------------------------------------------------------------------------*/ -#define SDRAM_MCSTS_MRSC 0x80000000 -#define SDRAM_MCSTS_SRMS 0x40000000 -#define SDRAM_MCSTS_CIS 0x20000000 +#define SDRAM_MCSTS_MRSC 0x80000000 +#define SDRAM_MCSTS_SRMS 0x40000000 +#define SDRAM_MCSTS_CIS 0x20000000 /*----------------------------------------------------------------------------- | SDRAM Refresh Timer Register +-----------------------------------------------------------------------------*/ -#define SDRAM_RTR_RINT_MASK 0xFFFF0000 +#define SDRAM_RTR_RINT_MASK 0xFFFF0000 #define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK) -#define sdram_HZ_to_ns(hertz) (1000000000/(hertz)) +#define sdram_HZ_to_ns(hertz) (1000000000/(hertz)) /*-----------------------------------------------------------------------------+ | SDRAM UABus Base Address Reg +-----------------------------------------------------------------------------*/ -#define SDRAM_UABBA_UBBA_MASK 0x0000000F +#define SDRAM_UABBA_UBBA_MASK 0x0000000F /*-----------------------------------------------------------------------------+ | Memory Bank 0-7 configuration +-----------------------------------------------------------------------------*/ -#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */ -#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */ -#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */ -#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */ -#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */ -#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */ -#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */ -#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */ -#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */ -#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */ -#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */ -#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */ -#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */ -#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */ -#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */ +#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */ +#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */ +#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */ +#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */ +#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */ +#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */ +#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */ +#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */ +#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */ +#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */ +#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */ +#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */ +#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */ +#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */ +#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */ /*-----------------------------------------------------------------------------+ | SDRAM TR0 Options +-----------------------------------------------------------------------------*/ -#define SDRAM_TR0_SDWR_MASK 0x80000000 -#define SDRAM_TR0_SDWR_2_CLK 0x00000000 -#define SDRAM_TR0_SDWR_3_CLK 0x80000000 -#define SDRAM_TR0_SDWD_MASK 0x40000000 -#define SDRAM_TR0_SDWD_0_CLK 0x00000000 -#define SDRAM_TR0_SDWD_1_CLK 0x40000000 -#define SDRAM_TR0_SDCL_MASK 0x01800000 -#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000 -#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000 -#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000 -#define SDRAM_TR0_SDPA_MASK 0x000C0000 -#define SDRAM_TR0_SDPA_2_CLK 0x00040000 -#define SDRAM_TR0_SDPA_3_CLK 0x00080000 -#define SDRAM_TR0_SDPA_4_CLK 0x000C0000 -#define SDRAM_TR0_SDCP_MASK 0x00030000 -#define SDRAM_TR0_SDCP_2_CLK 0x00000000 -#define SDRAM_TR0_SDCP_3_CLK 0x00010000 -#define SDRAM_TR0_SDCP_4_CLK 0x00020000 -#define SDRAM_TR0_SDCP_5_CLK 0x00030000 -#define SDRAM_TR0_SDLD_MASK 0x0000C000 -#define SDRAM_TR0_SDLD_1_CLK 0x00000000 -#define SDRAM_TR0_SDLD_2_CLK 0x00004000 -#define SDRAM_TR0_SDRA_MASK 0x0000001C -#define SDRAM_TR0_SDRA_6_CLK 0x00000000 -#define SDRAM_TR0_SDRA_7_CLK 0x00000004 -#define SDRAM_TR0_SDRA_8_CLK 0x00000008 -#define SDRAM_TR0_SDRA_9_CLK 0x0000000C -#define SDRAM_TR0_SDRA_10_CLK 0x00000010 -#define SDRAM_TR0_SDRA_11_CLK 0x00000014 -#define SDRAM_TR0_SDRA_12_CLK 0x00000018 -#define SDRAM_TR0_SDRA_13_CLK 0x0000001C -#define SDRAM_TR0_SDRD_MASK 0x00000003 -#define SDRAM_TR0_SDRD_2_CLK 0x00000001 -#define SDRAM_TR0_SDRD_3_CLK 0x00000002 -#define SDRAM_TR0_SDRD_4_CLK 0x00000003 +#define SDRAM_TR0_SDWR_MASK 0x80000000 +#define SDRAM_TR0_SDWR_2_CLK 0x00000000 +#define SDRAM_TR0_SDWR_3_CLK 0x80000000 +#define SDRAM_TR0_SDWD_MASK 0x40000000 +#define SDRAM_TR0_SDWD_0_CLK 0x00000000 +#define SDRAM_TR0_SDWD_1_CLK 0x40000000 +#define SDRAM_TR0_SDCL_MASK 0x01800000 +#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000 +#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000 +#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000 +#define SDRAM_TR0_SDPA_MASK 0x000C0000 +#define SDRAM_TR0_SDPA_2_CLK 0x00040000 +#define SDRAM_TR0_SDPA_3_CLK 0x00080000 +#define SDRAM_TR0_SDPA_4_CLK 0x000C0000 +#define SDRAM_TR0_SDCP_MASK 0x00030000 +#define SDRAM_TR0_SDCP_2_CLK 0x00000000 +#define SDRAM_TR0_SDCP_3_CLK 0x00010000 +#define SDRAM_TR0_SDCP_4_CLK 0x00020000 +#define SDRAM_TR0_SDCP_5_CLK 0x00030000 +#define SDRAM_TR0_SDLD_MASK 0x0000C000 +#define SDRAM_TR0_SDLD_1_CLK 0x00000000 +#define SDRAM_TR0_SDLD_2_CLK 0x00004000 +#define SDRAM_TR0_SDRA_MASK 0x0000001C +#define SDRAM_TR0_SDRA_6_CLK 0x00000000 +#define SDRAM_TR0_SDRA_7_CLK 0x00000004 +#define SDRAM_TR0_SDRA_8_CLK 0x00000008 +#define SDRAM_TR0_SDRA_9_CLK 0x0000000C +#define SDRAM_TR0_SDRA_10_CLK 0x00000010 +#define SDRAM_TR0_SDRA_11_CLK 0x00000014 +#define SDRAM_TR0_SDRA_12_CLK 0x00000018 +#define SDRAM_TR0_SDRA_13_CLK 0x0000001C +#define SDRAM_TR0_SDRD_MASK 0x00000003 +#define SDRAM_TR0_SDRD_2_CLK 0x00000001 +#define SDRAM_TR0_SDRD_3_CLK 0x00000002 +#define SDRAM_TR0_SDRD_4_CLK 0x00000003 /*-----------------------------------------------------------------------------+ | SDRAM TR1 Options +-----------------------------------------------------------------------------*/ -#define SDRAM_TR1_RDSS_MASK 0xC0000000 -#define SDRAM_TR1_RDSS_TR0 0x00000000 -#define SDRAM_TR1_RDSS_TR1 0x40000000 -#define SDRAM_TR1_RDSS_TR2 0x80000000 -#define SDRAM_TR1_RDSS_TR3 0xC0000000 -#define SDRAM_TR1_RDSL_MASK 0x00C00000 -#define SDRAM_TR1_RDSL_STAGE1 0x00000000 -#define SDRAM_TR1_RDSL_STAGE2 0x00400000 -#define SDRAM_TR1_RDSL_STAGE3 0x00800000 -#define SDRAM_TR1_RDCD_MASK 0x00000800 -#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000 -#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800 -#define SDRAM_TR1_RDCT_MASK 0x000001FF -#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK) -#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0) -#define SDRAM_TR1_RDCT_MIN 0x00000000 -#define SDRAM_TR1_RDCT_MAX 0x000001FF +#define SDRAM_TR1_RDSS_MASK 0xC0000000 +#define SDRAM_TR1_RDSS_TR0 0x00000000 +#define SDRAM_TR1_RDSS_TR1 0x40000000 +#define SDRAM_TR1_RDSS_TR2 0x80000000 +#define SDRAM_TR1_RDSS_TR3 0xC0000000 +#define SDRAM_TR1_RDSL_MASK 0x00C00000 +#define SDRAM_TR1_RDSL_STAGE1 0x00000000 +#define SDRAM_TR1_RDSL_STAGE2 0x00400000 +#define SDRAM_TR1_RDSL_STAGE3 0x00800000 +#define SDRAM_TR1_RDCD_MASK 0x00000800 +#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000 +#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800 +#define SDRAM_TR1_RDCT_MASK 0x000001FF +#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK) +#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0) +#define SDRAM_TR1_RDCT_MIN 0x00000000 +#define SDRAM_TR1_RDCT_MAX 0x000001FF /*-----------------------------------------------------------------------------+ | SDRAM WDDCTR Options +-----------------------------------------------------------------------------*/ -#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000 -#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000 -#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000 -#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000 -#define SDRAM_WDDCTR_DCD_MASK 0x000001FF +#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000 +#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000 +#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000 +#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000 +#define SDRAM_WDDCTR_DCD_MASK 0x000001FF /*-----------------------------------------------------------------------------+ | SDRAM CLKTR Options +-----------------------------------------------------------------------------*/ -#define SDRAM_CLKTR_CLKP_MASK 0xC0000000 -#define SDRAM_CLKTR_CLKP_0DEG 0x00000000 -#define SDRAM_CLKTR_CLKP_90DEG 0x40000000 -#define SDRAM_CLKTR_CLKP_180DEG 0x80000000 -#define SDRAM_CLKTR_DCDT_MASK 0x000001FF +#define SDRAM_CLKTR_CLKP_MASK 0xC0000000 +#define SDRAM_CLKTR_CLKP_0DEG 0x00000000 +#define SDRAM_CLKTR_CLKP_90DEG 0x40000000 +#define SDRAM_CLKTR_CLKP_180DEG 0x80000000 +#define SDRAM_CLKTR_DCDT_MASK 0x000001FF /*-----------------------------------------------------------------------------+ | SDRAM DLYCAL Options +-----------------------------------------------------------------------------*/ -#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC -#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK) -#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2) +#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC +#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK) +#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2) /*-----------------------------------------------------------------------------+ | General Definition +-----------------------------------------------------------------------------*/ -#define DEFAULT_SPD_ADDR1 0x53 -#define DEFAULT_SPD_ADDR2 0x52 -#define MAXBANKS 4 /* at most 4 dimm banks */ -#define MAX_SPD_BYTES 256 -#define NUMHALFCYCLES 4 -#define NUMMEMTESTS 8 -#define NUMMEMWORDS 8 -#define MAXBXCR 4 -#define TRUE 1 -#define FALSE 0 +#define DEFAULT_SPD_ADDR1 0x53 +#define DEFAULT_SPD_ADDR2 0x52 +#define MAXBANKS 4 /* at most 4 dimm banks */ +#define MAX_SPD_BYTES 256 +#define NUMHALFCYCLES 4 +#define NUMMEMTESTS 8 +#define NUMMEMWORDS 8 +#define MAXBXCR 4 +#define TRUE 1 +#define FALSE 0 const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, @@ -666,37 +666,37 @@ unsigned char spd_read(uchar chip, uint addr); void get_spd_info(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void check_mem_type (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void check_volt_type (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void program_cfg0(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void program_cfg1(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void program_rtr (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void program_tr0 (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned long num_dimm_banks); void program_tr1 (void); -void program_ecc (unsigned long num_bytes); +void program_ecc (unsigned long num_bytes); unsigned long program_bxcr(unsigned long* dimm_populated, @@ -719,7 +719,7 @@ long int spd_sdram(void) { unsigned long total_size; unsigned long cfg0; unsigned long mcsts; - unsigned long num_dimm_banks; /* on board dimm banks */ + unsigned long num_dimm_banks; /* on board dimm banks */ num_dimm_banks = sizeof(iic0_dimm_addr); @@ -841,7 +841,7 @@ unsigned char spd_read(uchar chip, uint addr) void get_spd_info(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long dimm_found; @@ -931,7 +931,7 @@ void check_volt_type(unsigned long* dimm_populated, void program_cfg0(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long cfg0; @@ -1021,7 +1021,7 @@ void program_cfg0(unsigned long* dimm_populated, void program_cfg1(unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) + unsigned long num_dimm_banks) { unsigned long cfg1; mfsdram(mem_cfg1, cfg1); @@ -1039,7 +1039,7 @@ void program_cfg1(unsigned long* dimm_populated, void program_rtr (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bus_period_x_10; @@ -1100,7 +1100,7 @@ void program_rtr (unsigned long* dimm_populated, void program_tr0 (unsigned long* dimm_populated, unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long tr0; @@ -1159,7 +1159,7 @@ void program_tr0 (unsigned long* dimm_populated, for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { if (dimm_populated[dimm_num] == TRUE) { wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15); - t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2; + t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2; t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2; t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30); cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); @@ -1234,7 +1234,7 @@ void program_tr0 (unsigned long* dimm_populated, /* * Program SD_WR and SD_WCSBC fields */ - tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */ + tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */ switch (wcsbc) { case 0: tr0 |= SDRAM_TR0_SDWD_0_CLK; @@ -1623,8 +1623,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, unsigned long ctrl_bank_num[MAXBANKS]; unsigned long bx_cr_num; unsigned long largest_size_index; - unsigned long largest_size; - unsigned long current_size_index; + unsigned long largest_size; + unsigned long current_size_index; BANKPARMS bank_parms[MAXBXCR]; unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */ unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/ @@ -1785,7 +1785,7 @@ unsigned long program_bxcr(unsigned long* dimm_populated, return(bank_base_addr); } -void program_ecc (unsigned long num_bytes) +void program_ecc (unsigned long num_bytes) { unsigned long bank_base_addr; unsigned long current_address; diff --git a/doc/README.OFT b/doc/README.OFT index 8f00ebb2bb..dd1c632bc9 100644 --- a/doc/README.OFT +++ b/doc/README.OFT @@ -5,7 +5,7 @@ As part of the ongoing cleanup of the Linux PPC trees, the preferred way to pass bootloader and board setup information is the open firmware flat tree. -Please take a look at the following email discussion for some +Please take a look at the following email discussion for some background. http://ozlabs.org/pipermail/linuxppc-dev/2005-August/019408.html diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index ba2f4ead2c..41f44c5a37 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -95,14 +95,14 @@ * When CFG_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash * banks has to be determined at runtime and stored in a gloabl variable * tqm834x_num_flash_banks. The value of CFG_MAX_FLASH_BANKS_DETECT is only - * used insted of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and + * used instead of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and * should be made sufficiently large to accomodate the number of banks that - * might acutally be detected. Since most (all?) Flash related functions use + * might actually be detected. Since most (all?) Flash related functions use * CFG_MAX_FLASH_BANKS as the number of actual banks on the board, it is * defined as tqm834x_num_flash_banks. */ #define CFG_MAX_FLASH_BANKS_DETECT 2 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLY__ extern int tqm834x_num_flash_banks; #endif #define CFG_MAX_FLASH_BANKS (tqm834x_num_flash_banks) diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 981651ab07..d7d27e51af 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -277,7 +277,7 @@ #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE #ifdef CFG_PCISPEED_66 -/* +/* * For 66 MHz PCI clock additional Wait State is needed for CS0 (flash). */ #define CFG_BOOTCS_CFG 0x00057801 /* for pci_clk = 66 MHz */ diff --git a/lib_mips/board.c b/lib_mips/board.c index 5dfdf90d6c..b7d335641a 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -125,7 +125,7 @@ static void display_flash_config(ulong size) static int init_baudrate (void) { - uchar tmp[64]; /* long enough for environment variables */ + char tmp[64]; /* long enough for environment variables */ int i = getenv_r ("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c index 18eafe13de..12e84359c9 100644 --- a/lib_mips/mips_linux.c +++ b/lib_mips/mips_linux.c @@ -94,7 +94,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], checksum = ntohl (hdr->ih_hcrc); hdr->ih_hcrc = 0; - if (crc32 (0, (char *) data, len) != checksum) { + if (crc32 (0, (uchar *) data, len) != checksum) { printf ("Bad Header Checksum\n"); SHOW_BOOT_PROGRESS (-11); do_reset (cmdtp, flag, argc, argv); @@ -111,7 +111,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong csum = 0; printf (" Verifying Checksum ... "); - csum = crc32 (0, (char *) data, len); + csum = crc32 (0, (uchar *) data, len); if (csum != ntohl (hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); SHOW_BOOT_PROGRESS (-12); diff --git a/lib_ppc/board.c b/lib_ppc/board.c index f2a4746064..f40bb253b8 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -581,7 +581,6 @@ void board_init_f (ulong bootflag) /* NOTREACHED - relocate_code() does not return */ } - /************************************************************************ * * This is the next part if the initialization sequence: we are now @@ -591,7 +590,6 @@ void board_init_f (ulong bootflag) * ************************************************************************ */ - void board_init_r (gd_t *id, ulong dest_addr) { cmd_tbl_t *cmdtp; @@ -1124,8 +1122,6 @@ static inline void mdm_readline(char *buf, int bufsiz) } } - - extern void dbg(const char *fmt, ...); int mdm_init (void) { -- 2.39.5