From f2acc55e3d28e96a6fcc060a7081eb4e2ad96350 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 16:55:52 -0600 Subject: [PATCH] rockchip: Put README image creation commands on one line It is easier to paste these into the command line if they are a single common. Use line continuation instead of separate lines. Signed-off-by: Simon Glass --- doc/README.rockchip | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/doc/README.rockchip b/doc/README.rockchip index feb11ff53a..87ce9d2e9f 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -67,7 +67,8 @@ Connect your board's OTG port to your computer. To create a suitable image and write it to the board: - ./firefly-rk3288/tools/mkimage -T rkimage -d ./firefly-rk3288/spl/u-boot-spl-dtb.bin out + ./firefly-rk3288/tools/mkimage -T rkimage -d \ + ./firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ cat out | openssl rc4 -K 7c4e0304550509072d2c7b38170d1711 | rkflashtool l If all goes well you should something like: @@ -89,8 +90,9 @@ Booting from an SD card To write an image that boots from an SD card (assumed to be /dev/sdc): - ./firefly-rk3288/tools/mkimage -T rksd -d firefly-rk3288/spl/u-boot-spl-dtb.bin out - sudo dd if=out of=/dev/sdc seek=64 + ./firefly-rk3288/tools/mkimage -T rksd -d \ + firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ + sudo dd if=out of=/dev/sdc seek=64 && \ sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256 This puts the Rockchip header and SPL image first and then places the U-Boot -- 2.39.5