From f5871a66fd938a59ef79c9221eac9a891a7e1713 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 25 May 2018 15:32:17 +0530 Subject: [PATCH] sunxi: Drop legacy usb_phy.c Allwinner PHY USB code is now part of generic-phy framework, so drop existing legacy handling like arch/arm/mach-sunxi.c and related code areas. Signed-off-by: Jagan Teki Acked-by: Jun Nie --- arch/arm/include/asm/arch-sunxi/usb_phy.h | 20 -- arch/arm/mach-sunxi/Makefile | 3 - arch/arm/mach-sunxi/usb_phy.c | 406 ---------------------- board/sunxi/board.c | 7 - 4 files changed, 436 deletions(-) delete mode 100644 arch/arm/include/asm/arch-sunxi/usb_phy.h delete mode 100644 arch/arm/mach-sunxi/usb_phy.c diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h deleted file mode 100644 index 39e7af45dd..0000000000 --- a/arch/arm/include/asm/arch-sunxi/usb_phy.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Sunxi usb-phy code - * - * Copyright (C) 2015 Hans de Goede - * Copyright (C) 2014 Roman Byshko - * - * Based on code from - * Allwinner Technology Co., Ltd. - */ - -int sunxi_usb_phy_probe(void); -int sunxi_usb_phy_remove(void); -void sunxi_usb_phy_init(int index); -void sunxi_usb_phy_exit(int index); -void sunxi_usb_phy_power_on(int index); -void sunxi_usb_phy_power_off(int index); -int sunxi_usb_phy_vbus_detect(int index); -int sunxi_usb_phy_id_detect(int index); -void sunxi_usb_phy_enable_squelch_detect(int index, int enable); diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 1e261bdc87..4c752491a1 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -11,9 +11,6 @@ obj-y += clock.o obj-y += cpu_info.o obj-y += dram_helpers.o obj-y += pinmux.o -ifndef CONFIG_MACH_SUN9I -obj-y += usb_phy.o -endif obj-$(CONFIG_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_SUN6I_PRCM) += prcm.o obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c deleted file mode 100644 index 318e225528..0000000000 --- a/arch/arm/mach-sunxi/usb_phy.c +++ /dev/null @@ -1,406 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Sunxi usb-phy code - * - * Copyright (C) 2015 Hans de Goede - * Copyright (C) 2014 Roman Byshko - * - * Based on code from - * Allwinner Technology Co., Ltd. - */ - -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_MACH_SUN4I) || \ - defined(CONFIG_MACH_SUN5I) || \ - defined(CONFIG_MACH_SUN6I) || \ - defined(CONFIG_MACH_SUN7I) || \ - defined(CONFIG_MACH_SUN8I_A23) || \ - defined(CONFIG_MACH_SUN9I) -#define SUNXI_USB_CSR 0x404 -#else -#define SUNXI_USB_CSR 0x410 -#endif - -#define SUNXI_USB_PMU_IRQ_ENABLE 0x800 -#define SUNXI_USB_PASSBY_EN 1 - -#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10) -#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9) -#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8) -#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0) - -#define REG_PHY_UNK_H3 0x420 -#define REG_PMU_UNK_H3 0x810 - -/* A83T specific control bits for PHY0 */ -#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5) -#define SUNXI_PHY_CTL_SIDDQ BIT(3) - -/* A83T HSIC specific bits */ -#define SUNXI_EHCI_HS_FORCE BIT(20) -#define SUNXI_EHCI_CONNECT_DET BIT(17) -#define SUNXI_EHCI_CONNECT_INT BIT(16) -#define SUNXI_EHCI_HSIC BIT(1) - -static struct sunxi_usb_phy { - int usb_rst_mask; - int gpio_vbus; - int gpio_vbus_det; - int gpio_id_det; - int id; - int init_count; - int power_on_count; - ulong base; -} sunxi_usb_phy[] = { - { - .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK, - .id = 0, - .base = SUNXI_USB0_BASE, - }, - { - .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK, - .id = 1, - .base = SUNXI_USB1_BASE, - }, -#if CONFIG_SUNXI_USB_PHYS >= 3 - { -#ifdef CONFIG_MACH_SUN8I_A83T - .usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK | - CCM_USB_CTRL_12M_CLK, -#else - .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK, -#endif - .id = 2, - .base = SUNXI_USB2_BASE, - }, -#endif -#if CONFIG_SUNXI_USB_PHYS >= 4 - { - .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK, - .id = 3, - .base = SUNXI_USB3_BASE, - } -#endif -}; - -static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY; - -static int get_vbus_gpio(int index) -{ - switch (index) { - case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN); - case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN); - case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN); - case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN); - } - return -EINVAL; -} - -static int get_vbus_detect_gpio(int index) -{ - switch (index) { - case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET); - } - return -EINVAL; -} - -static int get_id_detect_gpio(int index) -{ - switch (index) { - case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET); - } - return -EINVAL; -} - -__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr, - int data, int len) -{ - int j = 0, usbc_bit = 0; - void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR; - -#ifdef CONFIG_MACH_SUN8I_A33 - /* CSR needs to be explicitly initialized to 0 on A33 */ - writel(0, dest); -#endif - - usbc_bit = 1 << (phy->id * 2); - for (j = 0; j < len; j++) { - /* set the bit address to be written */ - clrbits_le32(dest, 0xff << 8); - setbits_le32(dest, (addr + j) << 8); - - clrbits_le32(dest, usbc_bit); - /* set data bit */ - if (data & 0x1) - setbits_le32(dest, 1 << 7); - else - clrbits_le32(dest, 1 << 7); - - setbits_le32(dest, usbc_bit); - - clrbits_le32(dest, usbc_bit); - - data >>= 1; - } -} - -#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) -static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy) -{ -#if defined CONFIG_MACH_SUNXI_H3_H5 - if (phy->id == 0) - clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01); -#endif - clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02); -} -#elif defined CONFIG_MACH_SUN8I_A83T -static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy) -{ -} -#else -static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy) -{ - /* The following comments are machine - * translated from Chinese, you have been warned! - */ - - /* Regulation 45 ohms */ - if (phy->id == 0) - usb_phy_write(phy, 0x0c, 0x01, 1); - - /* adjust PHY's magnitude and rate */ - usb_phy_write(phy, 0x20, 0x14, 5); - - /* threshold adjustment disconnect */ -#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I - usb_phy_write(phy, 0x2a, 2, 2); -#else - usb_phy_write(phy, 0x2a, 3, 2); -#endif - - return; -} -#endif - -static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable) -{ - unsigned long bits = 0; - void *addr; - - addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE; - - bits = SUNXI_EHCI_AHB_ICHR8_EN | - SUNXI_EHCI_AHB_INCR4_BURST_EN | - SUNXI_EHCI_AHB_INCRX_ALIGN_EN | - SUNXI_EHCI_ULPI_BYPASS_EN; - -#ifdef CONFIG_MACH_SUN8I_A83T - if (phy->id == 2) - bits |= SUNXI_EHCI_HS_FORCE | - SUNXI_EHCI_CONNECT_INT | - SUNXI_EHCI_HSIC; -#endif - - if (enable) - setbits_le32(addr, bits); - else - clrbits_le32(addr, bits); - - return; -} - -void sunxi_usb_phy_enable_squelch_detect(int index, int enable) -{ -#ifndef CONFIG_MACH_SUN8I_A83T - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - - usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2); -#endif -} - -void sunxi_usb_phy_init(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - phy->init_count++; - if (phy->init_count != 1) - return; - - setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask); - - sunxi_usb_phy_config(phy); - - if (phy->id != 0) - sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN); - -#ifdef CONFIG_MACH_SUN8I_A83T - if (phy->id == 0) { - setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR, - SUNXI_PHY_CTL_VBUSVLDEXT); - clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR, - SUNXI_PHY_CTL_SIDDQ); - } -#endif -} - -void sunxi_usb_phy_exit(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - phy->init_count--; - if (phy->init_count != 0) - return; - - if (phy->id != 0) - sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN); - -#ifdef CONFIG_MACH_SUN8I_A83T - if (phy->id == 0) { - setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR, - SUNXI_PHY_CTL_SIDDQ); - } -#endif - - clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask); -} - -void sunxi_usb_phy_power_on(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - - if (initial_usb_scan_delay) { - mdelay(initial_usb_scan_delay); - initial_usb_scan_delay = 0; - } - - phy->power_on_count++; - if (phy->power_on_count != 1) - return; - - if (phy->gpio_vbus >= 0) - gpio_set_value(phy->gpio_vbus, 1); -} - -void sunxi_usb_phy_power_off(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - - phy->power_on_count--; - if (phy->power_on_count != 0) - return; - - if (phy->gpio_vbus >= 0) - gpio_set_value(phy->gpio_vbus, 0); -} - -int sunxi_usb_phy_vbus_detect(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - int err, retries = 3; - - if (phy->gpio_vbus_det < 0) - return phy->gpio_vbus_det; - - err = gpio_get_value(phy->gpio_vbus_det); - /* - * Vbus may have been provided by the board and just been turned of - * some milliseconds ago on reset, what we're measuring then is a - * residual charge on Vbus, sleep a bit and try again. - */ - while (err > 0 && retries--) { - mdelay(100); - err = gpio_get_value(phy->gpio_vbus_det); - } - - return err; -} - -int sunxi_usb_phy_id_detect(int index) -{ - struct sunxi_usb_phy *phy = &sunxi_usb_phy[index]; - - if (phy->gpio_id_det < 0) - return phy->gpio_id_det; - - return gpio_get_value(phy->gpio_id_det); -} - -int sunxi_usb_phy_probe(void) -{ - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - struct sunxi_usb_phy *phy; - int i, ret = 0; - - for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) { - phy = &sunxi_usb_phy[i]; - - phy->gpio_vbus = get_vbus_gpio(i); - if (phy->gpio_vbus >= 0) { - ret = gpio_request(phy->gpio_vbus, "usb_vbus"); - if (ret) - return ret; - ret = gpio_direction_output(phy->gpio_vbus, 0); - if (ret) - return ret; - } - - phy->gpio_vbus_det = get_vbus_detect_gpio(i); - if (phy->gpio_vbus_det >= 0) { - ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det"); - if (ret) - return ret; - ret = gpio_direction_input(phy->gpio_vbus_det); - if (ret) - return ret; - } - - phy->gpio_id_det = get_id_detect_gpio(i); - if (phy->gpio_id_det >= 0) { - ret = gpio_request(phy->gpio_id_det, "usb_id_det"); - if (ret) - return ret; - ret = gpio_direction_input(phy->gpio_id_det); - if (ret) - return ret; - sunxi_gpio_set_pull(phy->gpio_id_det, - SUNXI_GPIO_PULL_UP); - } - } - - setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); - - return 0; -} - -int sunxi_usb_phy_remove(void) -{ - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - struct sunxi_usb_phy *phy; - int i; - - clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); - - for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) { - phy = &sunxi_usb_phy[i]; - - if (phy->gpio_vbus >= 0) - gpio_free(phy->gpio_vbus); - - if (phy->gpio_vbus_det >= 0) - gpio_free(phy->gpio_vbus_det); - - if (phy->gpio_id_det >= 0) - gpio_free(phy->gpio_id_det); - } - - return 0; -} diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 8208989adf..5ed1b8bae1 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -23,7 +23,6 @@ #include #include #include -#include #ifndef CONFIG_ARM64 #include #endif @@ -774,12 +773,6 @@ int misc_init_r(void) setup_environment(gd->fdt_blob); -#ifndef CONFIG_MACH_SUN9I - ret = sunxi_usb_phy_probe(); - if (ret) - return ret; -#endif - #ifdef CONFIG_USB_ETHER usb_ether_init(); #endif -- 2.39.5