From f7394049d3a6a932003edf5fa35d10fe8bc17352 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes Date: Thu, 29 Jan 2015 12:03:23 +0100 Subject: [PATCH] stm32l1.cfg: Add ID Code of Cat.2 devices. Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250 Signed-off-by: Uwe Bonnes Reviewed-on: http://openocd.zylin.com/2517 Reviewed-by: Paul Fertser Tested-by: jenkins --- tcl/target/stm32l1.cfg | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/tcl/target/stm32l1.cfg b/tcl/target/stm32l1.cfg index 8591830c..13487c4e 100644 --- a/tcl/target/stm32l1.cfg +++ b/tcl/target/stm32l1.cfg @@ -49,21 +49,24 @@ if { [info exists BSTAPID] } { # FIXME this never gets used to override defaults... set _BSTAPID $BSTAPID } else { - # See STM Document RM0038 Section 30.6.1 - # (section 30.6.2 seems incorrect, at least in RM0038 DocID 15965 Rev 10) + # See STM Document RM0038 Section 30.6.1 Rev. 12 # Low and medium density set _BSTAPID1 0x06416041 + # Cat.2 device (medium+ density) + set _BSTAPID2 0x06429041 # Cat.3 device (medium+ density) - set _BSTAPID2 0x06427041 + set _BSTAPID3 0x06427041 # Cat.4 device, STM32L15/6xxD or Cat.3 device, some STM32L15/6xxC-A models - set _BSTAPID3 0x06436041 + set _BSTAPID4 0x06436041 # Cat.5 device (high density), STM32L15/6xxE - set _BSTAPID4 0x06437041 + set _BSTAPID5 0x06437041 } if {[using_jtag]} { - swj_newdap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 -expected-id $_BSTAPID4 + swj_newdap $_CHIPNAME bs -irlen 5 \ + -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 expected-id $_BSTAPID3 \ + -expected-id $_BSTAPID4 -expected-id $_BSTAPID5 } set _TARGETNAME $_CHIPNAME.cpu -- 2.39.5