From f885b849681ce0f15c2df313f38ae06a601be506 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 30 Sep 2014 18:45:32 +0200 Subject: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi In order for the gmac nic to work reliable on the Bananapi, we need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" of the GMAC clk register (0x01c20164) to 3. Without this about 9 out of 10 ethernet packets get lost, with this setting there is no packet loss. So far setting these bits is only necessary on the Bananapi, so this commit solves this with a bit of #ifdef CONFIG_BANANAPI code. If in the future we need to do something similar for other boards, we can create a specific CONFIG_FOO option for this then. Reported-by: Karsten Merker Signed-off-by: Hans de Goede Tested-by: Karsten Merker Tested-by: Zoltan HERPAI Tested-by: Tony Zhang Acked-by: Ian Campbell --- board/sunxi/gmac.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index e7ff95285c..6348d27282 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -24,6 +24,15 @@ int sunxi_gmac_initialize(bd_t *bis) CCM_GMAC_CTRL_GPIT_MII); #endif + /* + * In order for the gmac nic to work reliable on the Bananapi, we + * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" + * of the GMAC clk register to 3. + */ +#ifdef CONFIG_BANANAPI + setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); +#endif + /* Configure pin mux settings for GMAC */ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { #ifdef CONFIG_RGMII -- 2.39.5