From f8b7507d41e9d2607e876b74f6ce79235f6bd618 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 22 Aug 2013 13:22:02 +0900 Subject: [PATCH] net: sh-eth: Add control for padding size of packet descriptor sh-eth can change the alignment size of a packet descriptor according to BUS size. This patch adds this function. Signed-off-by: Hisashi Nakamura Signed-off-by: Nobuhiro Iwamatsu --- drivers/net/sh_eth.c | 13 ++++++++----- drivers/net/sh_eth.h | 27 ++++++++++++++++++++++----- 2 files changed, 30 insertions(+), 10 deletions(-) diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 4cfd1e512a..c0389299be 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -238,15 +238,17 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) * Allocate rx data buffers. They must be 32 bytes aligned and in * P2 area */ - port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31); + port_info->rx_buf_malloc = malloc( + NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); if (!port_info->rx_buf_malloc) { printf(SHETHER_NAME ": malloc failed\n"); ret = -ENOMEM; goto err_buf_malloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) & - ~(32 - 1)); + tmp_addr = (u32)(((int)port_info->rx_buf_malloc + + (RX_BUF_ALIGNE_SIZE - 1)) & + ~(RX_BUF_ALIGNE_SIZE - 1)); port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); /* Initialize all descriptors */ @@ -352,8 +354,9 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) struct phy_device *phy; /* Configure e-dmac registers */ - sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL, - EDMR); + sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | + (EMDR_DESC | EDMR_EL), EDMR); + sh_eth_write(eth, 0, EESIPR); sh_eth_write(eth, 0, TRSCER); sh_eth_write(eth, 0, TFTR); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 9ad800e427..35a1eee0d7 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -31,6 +31,11 @@ #define ADDR_TO_P2(addr) (addr) #endif /* defined(CONFIG_SH) */ +/* base padding size is 16 */ +#ifndef CONFIG_SH_ETHER_ALIGNE_SIZE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 16 +#endif + /* Number of supported ports */ #define MAX_PORT_NUM 2 @@ -45,15 +50,16 @@ /* The size of the tx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define TX_DESC_PADDING 4 -#define TX_DESC_SIZE (12 + TX_DESC_PADDING) +#define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ +#define TX_DESC_SIZE (12 + TX_DESC_PADDING) /* Tx descriptor. We always use 3 bytes of padding */ struct tx_desc_s { volatile u32 td0; u32 td1; u32 td2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; /* There is no limitation in the number of rx descriptors */ @@ -61,15 +67,18 @@ struct tx_desc_s { /* The size of the rx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define RX_DESC_PADDING 4 +#define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ #define RX_DESC_SIZE (12 + RX_DESC_PADDING) +/* aligned cache line size */ +#define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32) /* Rx descriptor. We always use 4 bytes of padding */ struct rx_desc_s { volatile u32 rd0; volatile u32 rd1; u32 rd2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; struct sh_eth_info { @@ -320,6 +329,14 @@ enum DMAC_M_BIT { #endif }; +#if CONFIG_SH_ETHER_ALIGNE_SIZE == 64 +# define EMDR_DESC EDMR_DL1 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 32 +# define EMDR_DESC EDMR_DL0 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 16 /* Default */ +# define EMDR_DESC 0 +#endif + /* RFLR */ #define RFLR_RFL_MIN 0x05EE /* Recv Frame length 1518 byte */ -- 2.39.5